Hello Everyone Sorry for Mixing English & Hindi Language. You can use Captions for better understanding Thankyou.

@ultralaserlab

2 жыл бұрын

Now its ok i add subtitles

@ltsgobrando

2 жыл бұрын

Funny thing is I usually struggle with accents and yours didn't throw me in the least.... though there's a good possibility its cuz I recently started learning Hindi 😁

@y788lhjk1

2 жыл бұрын

No worries mate

@RimWulf

2 жыл бұрын

Thanks for behind mindful.

@EternalResonance

2 жыл бұрын

Do you use both languages because its done normally around you? just not use to hearing both languages being used.

Good machine and technology, didn't understand a thing he said!

@artmckay6704

3 жыл бұрын

Yeah, me too! I can never understand these East India guys. Their accents are so heavy.

@MrQuazar

3 жыл бұрын

It was mantra lizermicrojet

@jamesbutler5570

3 жыл бұрын

what the heck. where are the english subtitles?

@artmckay6704

3 жыл бұрын

@@jamesbutler5570 my thought exactly! :)

@The_Coffee_Rabbit_Hole

3 жыл бұрын

Man i definitly understood lazer microjet 😉

My favorite part of the video was when he said "laser micro jet" 9,314 times.

@Lada-mu5dg

2 жыл бұрын

When did he do that

@andrewbobucky4612

2 жыл бұрын

@@Lada-mu5dg after he said laser micro jet, but before he said laser micro jet again.

@Lada-mu5dg

2 жыл бұрын

@@andrewbobucky4612 did he say it 9,314 times?

@andrewbobucky4612

2 жыл бұрын

@@Lada-mu5dg I might be off by 1. He may have say it 9,313 or 9,315 times.

@roadtrip5643

2 жыл бұрын

🤣😅🤣

Switching back and fourth between hindi and english was a little confusing, but this technology is genius, the water is a waveguide that directly contacts the material and evacuates the ablated material, its like a fiber laser on steroids, very impressive.

@mamadshonazaramonov3010

2 жыл бұрын

So he was SWITCHING!! Did not notice, really.

@accidental-traveller

2 жыл бұрын

@@mamadshonazaramonov3010 i just thought exactly the same!

@CarLoverPhotography

2 жыл бұрын

And cools it

@rodenreyes6320

Ай бұрын

Who is not intrigued by this machine? Imagine it cuts through thick ordinarily unmachinable materials with breathtaking precision. Can you imagine the future machines,say 20 or 30 or 50 years from now? Will man manufacture people and not make them in bed ,100 years hence?

Barely understood, but the technology Is amazing...

@TheAnit500

2 жыл бұрын

I'm pretty sure that's because this is an Indian channel. I've worked with a lot of Indians in the past and in my city(in Canada) we have channels on the radio that sound like this. It's not that they're speaking English badly, they're speaking a pidgin language with many English words.

@michaelrotter5143

2 жыл бұрын

HORRIBLE HORRIBLE TO LISTEN TO YOU !! I litterlerly do understand nothing !!! nothing !!! Why dont you just shut up and just do not show us the video ??? next time, please do not speak english !!! It sounds really really horrible horrible !!

@fromhl7619

Жыл бұрын

@@TheAnit500 thank you so much for the explanation, that makes everything much more clear.

This technology looks amazing. His voice reminds me of that 1 time when I met an Indian accountant in the park and he tried to fix my English pronunciation while my American boss told me that I have a good California accent. It was funny though 😂

@radenbagushadiningratsoery7313

2 жыл бұрын

😂 Indian think their accent is just perfect makes them want to fix other people accent while here we are trying to understand this heavy indian accent

Wooooooow so clean cut and shape in solid thick surface. Love it

I worked at nhbb they make aerospace ball bearings,the no burs after the cut takes away a step by not having to grind them off,also not burning the metal is big in the machining world

The accent is hard to understand but great video none the less. This is one of those innovative technologies that seems kinda obvious after it's been made. The way the water jet cools the material to prevent it from melting resulting in a cleaner cut is genius. Got a like from me!

@michaelrotter5143

2 жыл бұрын

HORRIBLE HORRIBLE TO LISTEN TO YOU !! I litterlerly do understand nothing !!! nothing !!! Why dont you just shut up and just do not show us the video ??? next time, please do not speak english !!! It sounds really really horrible horrible !!

@ayushmaurya1912

2 жыл бұрын

@@michaelrotter5143get the fu*k out of here no one in invited you here.

@extrudeddd7332

2 жыл бұрын

@@michaelrotter5143 thanks for the laugh.

@fromhl7619

Жыл бұрын

It's not accent, it's mixing Indi with English. You on the other hand only speak 1 language

This thing is close to magic. Amazing power and precision.

@teknosql4740

24 күн бұрын

Magic just technology from other dimension

I'm quite curious to compare and contrast the efficacy against EDM. Especially regarding hardness of materials. Water-jets were cutting edge (I meant that), at the time but slowly have been surpassed by many methods of technological machining. I'm glad to know I could still understand him😅

@cherishpearls

2 жыл бұрын

I am also curious about this. have you found any sources comparing the two?

@panaglobal507

Жыл бұрын

Edm is an expensive and slow process for precision sheet metal cutting maybe thats where it fits.

@cutterboard4144

Жыл бұрын

As far as i Know the material must be conductive for EDM, so Ceramics woulnt work.

At first I thought it was the accent, but actually it's the mix between English and Hindi language. Anyways, truly great technology, I want it so badly! Thanks for the video 🙏

That laser micro jet is next level tech for precision cutting! Love it! 🔥

Cool! Super high precision, straighter and more accurate cuts, cooling while cutting, less slag, and longer distance. I'd wonder what the additional costs was, but I'm sure most precision lasers or water cutters are already pretty expensive. I don't see this machine adding too much additional costs, am I right in that assumption?

Amazing piece of technology, cutting those tiny square holes with such precision and so cleanly is a testament to human ingenuity. Imagine where this can go in 50 years, if we’re still here and able to prosper as we can now.

@pedridemperi9872

Жыл бұрын

It's almost as exact as the tolerance in ancient massive stones in ancient cities.

@Osukar

11 ай бұрын

@@pedridemperi9872for sure, the same 1 μm precision as with the pyramids of Egypt, ahaha

@jarekb7855

7 ай бұрын

It will be possible to murder people with very, very high precision.

I work with a lot of Indian nationals as a software engineer, and even I had had a difficult time understanding more than 1/3 of the words.

@ultralaserlab

2 жыл бұрын

Yes due to hindi English accent is also different

@RobertLBarnard

2 жыл бұрын

@@ultralaserlab Please no offense. You would laugh if I were to (attempt to) learn Hindi, then use it to try and talk with you. I would bust my sides laughing too. India and the Indian people are gracious and hard working (quite intelligent too) and are good friends of the US (and those of us who live here).

@nielscremer599

2 жыл бұрын

@@RobertLBarnard respect

@RobertLBarnard

2 жыл бұрын

@@boitedetampax397 I thought naming things is the hardest part? 😁

@Gunzee

2 жыл бұрын

@@ultralaserlab bro it's not the accent, it's because you're switching between English and Hindi.

Incredible machine thank you your videos quite informative

Sangat bagus kontennya dan sangat mengispirasi,yang dulunya belum tau sekarang jadi tahu,sukses buat chanelnya

For any who is confused by what he said, he is speaking English and hindi mix. Its not an accent Now adays indian speak in this manner to understand technical topics

Nice explanation...

really great invention, respect

Nice, in steel whats the maximum high you can cut. You know WDM works in steel til the arch of wire is over the technical desviation. Thks a lot .

Wonderful technology

Lovely machine rather than water jet machine 👏👌

this is so powerful, amazing!

Thanks Ranjid

this is great machine and technology awsome i enjoy this video!👏

Bro thx for sharing this knowledge. 🙏

Absolutely genius

Maximum Cutting thickness? Price?

Awesome machine Would be great for fuel injectors

Very helpful information

WOW! Wonderful micrilo waterjet

You could probably make a hell of a knife with that. And some great micro-fluidic molds

How does it compare to edm wire machine?

How does it compare to a wire edm machine?

Kitne thickness ka materials cut kar sakte hai

Laser MicroJet hapki apki. Yay!

Amazing

Salute to scientist.

very informative video, dont worry about the mixing of hindi and english, i hail from Brasil, and with subtitles the information came out perfectly my friend. =D

I am from surat can we use this machine for diamond cutting and polishing.

Best machine for all radiators..very cool machine love from Karachi Pakistan 🇵🇰

Sir please share the cost of the machine and supplier details it will be useful my research work

The water jet is powerfull🤯

This is the first time I'm hearing of this technique and the precision is amazing. Also, please keep it professional and use only English, unless you mention Hindi in the title so people know what to expect.

This is so awesome

How do you keep this micro rascal from cutting into the earth? Can it be dialed back to engrave to a chosen depth?

Kya is machine mein pcd (poly crystal diamond )cutting kar sakte hai?

Is this is the replacement of edm cnc wire cut

What kind of laser this machine use?

WOW that was so cool!!!.... I think?... 😆 Couldn't translate a single word of that.

Good info !

So it could be enlarged to remove rock in a mine? Seems safe?

Laser MicroJet can cut non metallic materials ?

Jwellery main bhi Kaam karegi kya lesar cutting jese

@ultralaserlab

3 жыл бұрын

Yes kregi

Good technology sir

Wow! Thank you...

Wow....nice invention...

"Jett revive me! jett" Hahahaha

WAAAAAAAHHHHHOOUUUU!!!!!!!!!!AMAZING!!!!!!!

Satisfying😍

What is max thickness it can cut without taper?

Cutting speed for ss 304/ss316? Sq MM/ minute?

I need to get me one of these!

@dankosinski804

6 ай бұрын

I can assist with that if you are interested.

Do you guys sell the laser head in the system

¡Impresionante! Gracias por compartir.

how to cut 10mm dia pipe profile in fiber laser cutting machine??

Die making bhi possible hai ??

Just talk 100% English? You are very good at it and will have a wider audience, maybe do a separate channel for hindi versions?

Nice

Yeah, long story short they summon a demon at the end of the video.

cutting and microjet... got it..

nice technology

Genial! Fabuloso!

How much thick metal could be cut. Harden metal could cut or not?

Is this sink good for washing my hands?

OMG.... your accent is very strong... I didn't understand most of parts you said. To be honest, I only understood "laser micro jet".

Perfect pronounce 👌

Good information sir ji🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

What keeps the water from splashing into the laser beam upon hitting the surface to be cut? If that happens, wouldn't the water mass diffract the beam?

@brainisfullofnonsense8183

2 жыл бұрын

The laser beam is INSIDE the jet of water. That is what is amazing.... The tiny stream of water acts like fiber optic strands to contain the beam and keep it from getting larger all the way to the surface of the part. The inside of the water tube is almost 100% reflective and has some other nice benefits as well.

plz quota and give some spec. or cases study. thanks.

Can it cun tungsten carbide?

good info ❤️

You see amazing manufacturing process, I see nigh-invisible liquid-based laser death ray.

Awesome!!!!!

Omg I didn't understand anything, but I know he is explaining the laser jet technology.

Multi axis job possible?

Больше, больше лизРРРмайкРРРоджетов!

HOW MUCH IS THE MACHINE

I think this is a very nice explanation of a laser waterjet system... I think... Don't understand 75% he says.

Very nice video

I wants to know about speed of cutting in this type of Machinery.

Can it cut gold upto3mm without wastage

Não sabia que o laser era do Maicon Jackson 😂

Out of all the accents, gotta say Indian English is one of the most challenging one to listen to, maybe just one step under the Japanese English, I can't get used to it no matter how long I have been listening to it.

Can it hole 0.20 mm in brass, wall thickness 1mm?

Is it cut gold plate?

Crazy 😤🙀 tech

Hello like to know how mm can it cut