You're something special - i watched so many videos trying to understand how this chip is working- yours was the only one that broke it to details and explained the whole process, from A to Z- thank you so much for you time to make this video and hope you can make other videos explaining what to do if battery won't charge (common problem with Dell laptops) when either IC chip is going bad or some mosfets

@degnyibo9387

11 ай бұрын

❤

@alexgreis

8 ай бұрын

I agree with him. You vídeo is the best I have seen. And I study laptops for years. Thank you.

@FixTronics

8 ай бұрын

Thank you so much brother

Very informative. I have always wanted to know more about the charging ic. This will be a good start. Thanks

Thank you for this very well explained video. Perhaps a part 2 where you explain on the battery side of the BQ24780S the function of phase, Hi and Lo mossfet and how a laptop can work on battery while there is a short on the adapter or two protection mosfet side ? Much appreciated. Very best regards.

@RetroRepair

Жыл бұрын

I'd like to know too as this is where I have a problem. I'm seeing 8v to the battery and 0.2v when battery is connected

Thank you! Amazing theory, story and tips. Cant be better! You gave me tips to troubleshoot why my HP motherboard is not starting and charging light is flashing!!

@FixTronics

10 ай бұрын

You welcome brother I am glad you found my video helpful for you. I wish you all the best .

Wow! Amazing Explain and interesting helpfull video. Many more thanks ❤️❤️ Boss.

Thank you so much for making this video, we’re all looking forward to your next video .. 🙏

You explain well and thanks for the example of the laptop you encountered working with the battery . Thank you

@FixTronics

2 жыл бұрын

You are welcome dear friend

Thankyou, I've got a laptop that i was given that I was told had a "bad" motherboard. Everything I've been told points to this component having failed on the motherboard. This gives me a much better understanding of how the logic of this thing works and where to start with figuring everything out with it.

@FixTronics

10 ай бұрын

You are welcome brother I wish you all the best

please keep scl and sda separate. you make it look like they are looped to smdata. In any case, you're doing a really good work. your videos are quite helpful to me as a professional

Excellent explanation. Thumbs up sir

Thank you for the time you took to create such a nice video. I appreciate that you share your knowledge with others.

Thank you for such excellent explanations of these chips/circuits. It would be interesting to see how you would diagnose a laptop that powers on for 3-6 seconds then powers off. I have an Acer Predator Helios 300 that does that. The challenge is figuring out why EN1 drops out after 3-6 seconds when the KBC MAINPWON is always 3.3v and 3V_EN_R is always 0v? I need to spend more time understanding how the power controller, KBC and PCH interact during start-up. Are there any references that you can recommend (besides datasheets)? Perhaps after reviewing your KBC and power controller videos (and notes I made summarizing them) it will become clearer.

Nice work, Thanks so lot

I learnt a lot in this video i can't explain.

Very great video,Already used this information to repair a charging issue on a HP laptop,keep the videos coming.

@FixTronics

2 жыл бұрын

Glad you found it helpful Thanks👍🏻

@sohamroy7668

Жыл бұрын

What was the issue?

Muy bien explicado maestro,gracias.

My friend i love this.. so help full would be nice for a full video on all the pins maybe make a check list so we can follow steps when checking keep up the great woRK!!

Thanks , really good video. I have one Acer when I plug the battery nothing works ... I didn't find the problem yet .. now I have more info due to your video :)

osm explanation thank you sir

Thanks for information and tips ! I have a UX330CA motherboard (Asus) . I plug in my Lab Power Supply at and it led flashes 2 white blinks then shuts off. The moment it flashes white led blink , I measure at the input MOSFETS , current sensor 19V and also the 3.3V & 5V at the Coils .Also I Measure the input Voltage of the BQ24780S in pin VCC 19V which its present even after the 3-4 sec which it flashes White Led . Also the same goes for the 6V RGen it stays. The ACOK shows 5V for the 2 flashes one for each! And the ACDRV shows the 24V for the two flashes , one for Each.I found a SMD shorted resistor close to the ACOK which I change to 10K (I saw the typical application Schematic on Datasheet) and still no change.I am checking around the charger IC for shorted components! Any ideas ?

Great video sir very informative

@FixTronics

2 жыл бұрын

Thank you so much brother

I have just watched your video, it is great, thank you for sharing your knowledge

@FixTronics

Жыл бұрын

You are welcome brother

Excellent review.

Great👍🏾pls. Explain all sections of laptop👍🏾

it is a very easy explain Thanks

Thanks for the information..

Thanks for the valuable information

@FixTronics

2 жыл бұрын

U R welcome brother

Thank you Sir, very informative

@FixTronics

2 жыл бұрын

U welcome brother

Saudações do Brasil. Parabéns pelo vídeo! Com certeza me ajudou muito. Obrigado!

Thank you, very helpful video.

@FixTronics

9 ай бұрын

You welcome brother

Great video, thanks bro.

@FixTronics

Жыл бұрын

You welcome bro

Merci beaucouppour ces bonnes explications

@FixTronics

2 жыл бұрын

tu es le bienvenu cher ami😊⚘

Good contents 👍

@FixTronics

Жыл бұрын

Thanks

Thanks you, you explain well. Please can you explain us the 3v/5v ic also ?

Thanku for making these kinds of video sir , learning from you , also plzz make topic on sections like rtc , vin , vcc ldo

@FixTronics

2 жыл бұрын

You are welcome brother I will try hard to do my best Thank you so much

thanks you a lot for this video explaination , was very usefull :)

@FixTronics

Жыл бұрын

U welcome brother

Very simple and informative , I am lucky, this is the general idea and design of charging sercuit but you forget id pin in HP and dell which is very important .

@inwerp

2 жыл бұрын

ID pin is rather part of EC circuit

Thank you very much 😇😇

Thank you good job

Please please keep making these kinda videos please...

@FixTronics

2 жыл бұрын

I don't have much time these days But I will continue doing these kind of videos

Very helpfull

best well explain sir

@FixTronics

2 жыл бұрын

Thank you my dear 😊⚘

Good job

great video

HI Sir i'm fan of your channel I love the way you teach and may I request a no display laptop that you repairing Thank you! keep it up

@FixTronics

2 жыл бұрын

U welcome brother Sure as soon as I get a laptop with this issue I will make a video of it Thank you so much

thank you!!

I prefer some description about charging pump inside this ic in order idea being clearly.

@FixTronics

4 ай бұрын

Here it is brother kzread.info/dash/bejne/nnyky6qegLjge8o.html

greatvideo

So how does the super Io get it's power to give the ok go ahead signal?

Very Good video. Please increase or double your voice level.

Thank you, can you explain the LDO IC, maybe the RAM power IC, GFX IC?

Very Informative, I would like to see a similar diagram for the BQ2475argrr please, (slightly Different) to the BQ24780s

@FixTronics

9 ай бұрын

I will have a look at it Thanks brother

thank you very much, kind man. i want to modify my laptop to use all power from 100w USB C Power Supply and not resort to draining the battery

wow... thanks sir

@FixTronics

2 жыл бұрын

U welcome brother ^_^

gracias pana, todo esta mas claro ahora

@FixTronics

10 ай бұрын

You welcome bro

Thank u

you're awesome

THNX BROTHER NİCE VİDEO

thanks pro

thank you sir

@FixTronics

Жыл бұрын

You welcome brother

Thank u a lot

@FixTronics

2 жыл бұрын

U welcome brother

Please explain laptop is only working without battery when connect the battery laptop does not power up. 10:37 on phase there is no short but it is only producing 8v where my battery voltage rating is 15.4v. so the problem is laptop only works when battery is disconnected when battery is connected laptop does not power up at all. i have replace the bq chip but everything is still same. any help please...

I have a different problem, a short circuit occurs on the acn and acp pin ICs, is the IC damaged?

@FixTronics

3 ай бұрын

If you are measuring both pins with each other, then yes you will see a short, because they are connected across a very low resistance (Current Sense Resistor). But if you are seeing a short on one or both ACP and ACN to ground, the you main power rail is shorted. Your BQ chip is most likely to be ok...

Hye all i need help, If my laptop says battery not detected, but when charging can turn on pc, which part only actually problem? Then indicator light for charging not turn on. Battery new already installed (build in battery). Lenovo ThinkPad p1.

Thank you so much for this video. I think my laptop is experiencing this exact problem. Hp envy touch smart 14". bq blown out. Laptop working on battery but never works with charger. Can you know the rating and spefic bq of this?

@FixTronics

2 жыл бұрын

Your motherboard charging IC is Bq24715 if I am not mistaken This is from HP Envy TouchSmart M6 LA-9315P motherboard But please check it yourself. If the IC is blown and you can't read it the you need to find your motherboard number and search for a schematics to get the IC numbering

thank you bro kindly do one video on power sequence of laptop moyher board thankx

@FixTronics

2 жыл бұрын

I are welcome brother I will try to do it in future videos

Hi, Can you help me and give some hints? I have a laptop motherboard with this exact chip, but not powering on, completely dead. The charger IC gets 19V VCC, 6V REGN is present. ACDET is 1.3V, no voltage on ACDRV. Input mosfets seem to be fine. Many thanks!

@FixTronics

Жыл бұрын

Hi Check the ACDET if it is correct or not by calculating the voltage divider in which its connected to. I think it should be 2.4v if I am not mistaken

good explanation and very detail. i have a problem with my battery.. 19V is present.. but the voltage to the battery is very low about 3-4V... and when plug in the battery,, it drop to 1V.. ACDRV = 26V and main resistor produced 19V is present. RGN = 6V ACOK =3.3V any idea? bad battery?

@FixTronics

Жыл бұрын

It looks like you have a completely discharged battery. If you have a power supply try recharging it externally for a while and then plug it back to the laptop an connect the adapter. If it start to charge, then leave it till its fully charged You may still need to replace it anyway if it is old and weak already.. If all the above did not help then try a new battery replacement

@gagak84

Жыл бұрын

@@FixTronics ok i had recharge it for 15 minutes.. and plug in into the laptop.. and it works without DC in.. plug in the charger.. the charging led now turn on... now put it on charging (turn off laptop) for 1hr.. will update if it still have provlem

@gagak84

Жыл бұрын

@@FixTronics do u know the minimum voltage that the battery should have for the laptop able to recharge it?

@gagak84

Жыл бұрын

update..after fully charging using DC power supply.. the battery voltage when plug in... drop below 10V and laptop turn off... about 20-30s

Hi friend thanks for another informative video

الله يعطيك العافية مشكووور ما قصرت عندي جهاز hp فيه مشكلة ميت فحصت هذي الايسي بس كله تمام الا regn ماطلعتلي فولت مع انه 19 فولت موجودة بعد الموسفيتات

@FixTronics

2 жыл бұрын

أهلا أخي أكيد عندك ١٩ فولت بعد الموسفيت الاول والثاني لأن إذا ١٩ فولت موجود بعد الموسفيت الثاني المفترض يشتغل عندك الجهاز حتى لو ما كانت موجوده ٦ فولت REGN

@hackhassan397

2 жыл бұрын

@@FixTronics هلا بك مشكووور على الرد لا اخي موجود قبل الموسفيت الثاني لكن الفولت على gate الموسفيت الاول 18 فولت هل يمكن توصيل سلك 19 فولت الى نقطة بعد الموسفيت الثاني ام هناك شورت يمنع الايسي من اعطاء acdrv

@FixTronics

2 жыл бұрын

العفو أخي إذاً عندك شورت في الموسفيت الاول تأكد منه بإستخدام ملتيميتر S -->D S-->G D-->G وتأكد بأنه لا يوجد شورت بعد الموسفيت الثاني مع ال Ground إذا لا يوجد شورت بعد الموسفيت الثاني نعم بإمكانك تستخدم سلك مكان الموسفيت الثاني وسيعمل الجهاز ولكن البطارية لن تشحن

Thanks

@FixTronics

2 жыл бұрын

U welcome brother

It seems that the PROCHOT is an output signal?

Hi have a hp laptop when the battery is in the bq24780s gets hot and turned off.. ic bad ? No shorts but

@FixTronics

Жыл бұрын

Did you try replacing the battery with a good know working one If yes but the problem still persist then check the Battery Mosfet and Battery charging Mosfets and if they all are good then try replacing the BQ ic

Laptop works on charger, works off battery. See percentage but battery percentage wont go up during charging, 0 amp draw yet will say charging. Any indication? Dell machine.

@FixTronics

2 жыл бұрын

You may have a faulty battery or the battery voltage is too low

Where can i get the full forms ACDET - Ac detect like this & Good video thankyou

@FixTronics

10 ай бұрын

You can use the chip datasheet

레노버 노트북 E14모델이고, bq25700A IC가 있습니다. 배터리 충전이 되지 않고 배터리 잔량이 없으면 충전기로도 켜지지 않습니다. 배터리를 제거하면 충전기로 전원이 켜지는데, IC 문제일까요?

@FixTronics

2 жыл бұрын

나는이 문제를 일으키는 충전 IC가 아니라고 생각합니다. 노트북에 rtc 배터리가 없고 대신 주 배터리를 사용하는 경우 주 배터리가 매우 부족하면 BIOS가 엉망이 되어 배터리를 분리하고 배터리를 분리할 때까지 노트북이 켜지지 않을 수 있습니다. 바이오스를 재설정하면 노트북이 작동합니다. 또한 충전 IC가 양호하더라도 전압이 일정 수준 이하로 떨어지면 배터리가 충전되지 않습니다. 랩 벤치 전원 공급 장치로 배터리를 재충전하고 랩톱에 연결하고 전원을 켜거나 잘 알려진 다른 배터리를 사용해 보십시오. 이것이 도움이 되기를 바랍니다.

@ppongpong9160

2 жыл бұрын

@@FixTronics 조언 감사합니다. 저도 처음에 배터리 문제인 것 같아서 배터리는 새제품으로 교환을 했습니다. 배터리가 작동하니까 켜진다는 걸 그때 알았습니다. 그런데도 충전이 전혀 되지 않습니다. 처음 구입당시의 배터리 잔량으로만 전원이 켜지는 상태이고 배터리 잔량이 0이되면 충전기를 꽂아도 켜지지 않습니다. 배터리가 0이 되면 배터리를 제거해야만 어댑터로 전원이 켜지고, CPU의 성능제한 상태로 작동이 되어서 매우 느립니다.

@FixTronics

2 жыл бұрын

bq24780s와 매우 다른 bq25700a 데이터시트를 살펴보았습니다. 시스템이 배터리가 연결된 상태에서 전원이 켜지지 않고 배터리 없이 전원이 켜지는 것이 이상합니다. 아마도 IC 자체가 이 문제를 일으키는 것일 수 있습니다. 교체를 시도하고 해결되는지 확인하십시오.

@ppongpong9160

2 жыл бұрын

@@FixTronics 감사합니다.. 시도해보겠습니다. 하지만 IC를 구하는게 쉽지 않네요.

Brother, can you explaining about IC intersil 88739A, please?? 🙏

thanks

@FixTronics

2 жыл бұрын

U welcome brother

hi there thanks for the detailed information I have a lenovo laptop which use this IC and the laptop works on battery, works on batter + charger plugged but does not work with charger plugged and battery unplugged (maybe normal? ) On Battery plugged+ charger plugged the laptop shows as charging but it is sucking almost no current from charger (if computer shut down, if on, it will suck around 0.8A which is what the MB uses to run (so it runs on charger not on battery). As a result, laptop runs fine but battery charges extremely slow, almost no charge. did replace the low and high side mosfets (high one was shorted) but still same result. When I look at phase pin, on an oscilloscope I see a signal going from 0V to around 20V , very sharp peak to 20V and 0V, most of the cycle time being on around battery voltage. So it appears like mosftet are driven for a very short time causing too low current, voltage on the output to battery for it to charge properly. could you help with any advices? (I checked also ILIM pin, it has around 0.8V, shorted it to 3.3V (which should disable the limit and only got like 0.2 amps being drawn from charger)) Could it be that the ic is faulty? Or maybe it gets a limit on the SMBUS? (though, no error in OS (ubuntu with a live usb stick), shows as charging, charger light on and flashes very rare as mentioned in manual) Thank you very much

@FixTronics

2 жыл бұрын

Hello brother Almost all laptops will work with charger plugged battery unplugged, but I am not sure if the one you have is a bit different Did you try and replace the battery because it communicates with the ic through the SMBus, so it might be faulty and / or it sends wrong signals about its status. Also, the ic might not drive the high and low Mosfets correctly, So if possible, replace the ic just to make sure

Bonjour, Je rechereche le schéma pour un laptop Asus Rog Strix carte mere G531W? MERCI

@FixTronics

2 жыл бұрын

Salut, je vais essayer de le trouver pour vous et si je pouvais et je le partagerai avec vous

Great video ! I have a case, I replaced the BQ and the laptop is working fine on both battery and charger. I can see the charging sign in windows but the battery is not taking any current (10mA) therefore it is not charging. The charging light is blinking so I though it was a faulty battery so I bought a new one but unfortunately the batery is still not charging. I checked every pin of the BQ, PIN 1 : 19.3V Pin 2 : 19.3V Pin 5 : 3V Pin 6: 2.6V Pin 11: 3.21v Pin 12: 3.23v Pin 19 : 11.31V Pin 20 : 11.31V PIN 24: 6V The battery connector is good and I checked every pins as well. Everything looks fine, how can you explain that the laptop thinks it is charging the battery but it is not ?

@FixTronics

10 ай бұрын

Hello friend I don't see 25v ACDRV in the readings you provided.. You might have a shorted ACFET.. Please check both first and second Mosfets for short (S=>D & S=>G & D=>G).

@kader131

10 ай бұрын

@@FixTronics Hello my friend, ACDRV : 24.V And both mofset looks good :/

@FixTronics

10 ай бұрын

@@kader131 Try and check the charging Mosfets If they are ok try updating you drivers especially the bios and ec firmware

@kader131

10 ай бұрын

@@FixTronics I updated everything and is still not charging :/ I am thinking about to change the BQ again

Hi, i have a BQ25A and it doesnt want to give the ACDRIVE 25V to my mosfets. The ACOK is 3V, the 6V regen is OK and there’s no shorts anywhere. Does it mean the BQ chip itself is defect?

@FixTronics

6 ай бұрын

Please check if you have a resistor in between the Mosfets gate and the BQ ic. Check it if it is open circuit if not replace the BQ ic

@wout_vanhims

6 ай бұрын

@@FixTronics Thanks mate! After watching your video again, I did some more measurements and found that the 2nd input MOSFET was only 5 Ohms. After replacing it, BQ chips works fine again.

@FixTronics

6 ай бұрын

@wouterhimschoot Hi friend Glad to hear that you got it fixed and I am more happy to have you in my channel Thank you so much

datasheet regn said is 0.6v and my question is can this ic kill every thing the power couldn't pass the first Mosfet form the charger? the Mosfet looks good no short on it.

@FixTronics

3 ай бұрын

REGN must be 6v. Yes this IC can stop your laptop from turning on if it is faulty or if it detected a short within the motherboard

@tameratmekonnen1192

3 ай бұрын

@@FixTronics No short but I accidentally shorted mosfet with cap with my fat prob!😁 thank you sir! you helped a lot. keep it up! 🙏

@FixTronics

3 ай бұрын

You welcome brother Glad you knew the issue 🙂👍🏻 All the best...

Can you explain the same for the BQ25 Battery Charge Controller. Please

@FixTronics

2 жыл бұрын

Hi BQ25 is a BQ24 but they write the last two digits Instead of the first two. For example BQ25 is BQ24725 or BQ25A is BQ24725A

Благодарю! Помог найти неисправность

@FixTronics

2 жыл бұрын

добро пожаловать, рад, что вы нашли это полезным

Hi. I have Lenovo X1 with this circuit, computer work ok with charger and battery, detect charger, the charger led come up (ambar) but don't charge, I have 3,3v on ACOK, I have 6V on REGEN, could the BQ24780 is faulty? I have 3 new battery all do the same, but work in other laptop, have 0,2v on batdrv, this is not right?

@FixTronics

2 жыл бұрын

Hi All voltages you mentioned are correct and about BATDRV, yes it is correct as long as the adapter is connected and it should go to around 20v or so when the adapter is disconnected, and you said the laptop do work on battery, so that confirms your BATDRV is correct when the adapter is disconnected.. You should check the HIDRV and LODRV when the adabter is connected. Those HIDRV and LODRV are responsible for charging the battery by driving two Mosfets. The LODRV source pins are connected to GND and the HIDRV drain pins are connected to 19v The source of HIDRV Mosfet and drain of LODRV Mosfet are connected together, and this goes to the battery and to pin phase of the BQ ic

@kalukramerr

Жыл бұрын

@@FixTronics I change de BQ24780S and computer charge normaly and work ok now

THANK YOUUU VERY MUCH ...... PLEASE I HAVE A QUESTION .... WHAT IS THE NORMAL VOLTAGE FOR THE ACDET ..... IN MY IC I FOUND IT 2.8 V .... IS IT NORMAL?

@FixTronics

Жыл бұрын

You are welcome brother The ACDET is connected via a voltage divider which sets its voltage. Normally 2.8v is correct voltage, but you can calculate the output voltage of the voltage divider using this equation Vout=Vin*(R2/R1+R2)

Extremely helpful, i have laptop working with battery and working with ac only too but not charging battery and on battery connector it is providing 4v only but battery needs at least 7.6v. any idea what could be the cause. It is BQ24781

@FixTronics

Жыл бұрын

It might be because the battery voltage is too low and that is why it doesn't charge any more.. Try charging it externally first to around 10v and the install it and check it might work

hi good day i have a a problem when a check voltage in ACDRV is fluctuating around 3-4 volts where should be 26 volts and REGN is 6v but the ACOK is 0 v is where i should start to check i ready replace a ic same problem

@FixTronics

Жыл бұрын

Hi Try and check the two first Mosfets (ACFET and RBFET) for shorts and check the resistors at the ACDRV line. ACOK will only be generated when the 19v passes the first two Mosfets

@kyochan03

Жыл бұрын

@@FixTronics Thanks

Hi I have 6v at regn and the battery start charging then stops. I don't know why

@FixTronics

9 ай бұрын

Hi friend If your laptop is charging or at least tries to charge then the charging circuit is most likely to be good unless there is something wrong with ILIM charge and discharge current limit. Try first and change the battery if possible, because the battery itself can start and stop the charging process through the serial communication with the EC chip

Thank you. Very informative. Question pls sir. Assuming a good battery, but not charging when plugged in to power. Charger can power laptop on its own. battery can power laptop on its own. together, battery doesn't discharge or charge, but laptop works fine. Where to check for this?

@wayneharvett6170

2 жыл бұрын

Ended up being a fault BQ chip. Replaced and working

@FixTronics

2 жыл бұрын

Great Glad you sorted it out

@wayneharvett6170

Жыл бұрын

Isn't it strange, that I have another laptop with the exact same problem as I described above, but replacing the IC didn't fix this one. It almost trickle charges the battery when plugged in (like the voltage isn't enough to charge the battery, but its enough to stop the battery discharging). Might give up on this one.

@FixTronics

Жыл бұрын

@@wayneharvett6170 sometimes these BQ Ic chips came faulty even if it was new, so try replacing it ones more

Hello sir i have lenovo t460 laptop working well on adapter but battery percentage not increasing,,

@FixTronics

Жыл бұрын

Hi friend Its either the battery itself or the charging IC

10:20 i encountered similar problem, it was vice versa when laptop plugin on adapter it works but it doesn't work with battery. i checked battery and it was fine so it is probably this kind charging IC faulty.

@FixTronics

Жыл бұрын

It might be the charging IC but there are other possibilities. Check the Battery Mosfet and check the data bus lines at the battery connector (should be 3.3v). If the battery is fully discharged try charging it with external power supply first

I have similar problem. But it works on the adapter, charges the battery but wil not work on the battery. Can't find the problem. IdeaPad 330X 15AAR

@FixTronics

3 ай бұрын

Check the BATFET Mosfet. The Mosfet that connects the battery to the main power rail

Sir, my laptop battery was getting discharged very quickly and was working only with the charger connected. When I went to the store to replace the battery, the new battery was alsongetting discharged. So they said that the charger ic needs to be replaced. After watching your video I feel that a resistor or mos could also be shorted isn't it? So do I really need to replace the charger ic?

@FixTronics

Жыл бұрын

Hello brother Its most likely to be the charging IC, but it could also be a bad Mosfet in the charging circuit If changing the charging IC would not cost you much then try it first

@sohamroy7668

Жыл бұрын

@@FixTronics Okay. Thank you so much. But wouldn't the technicians who change the charger ic also be able to figure out if it's the mosfet that is faulty?

Sir is there any difference between ISL9520HRTZW418UB and ISL9520HRTZW4235W ? Does last digits make any difference. Can I replace 1st with 2nd in my dell laptop?

@FixTronics

Жыл бұрын

Hi friend Yes they are the same..

@Schubhamn

Жыл бұрын

@@FixTronics Thanks for the information.

I have VCC =19V, ACDET = 2.6V, REGN = 6V, ACDRV = 26V, and ACOK = 3.3V, is this normal? i saw some video from other youtubers saying ACOK = 0 V (ok) and not 3.3V

@FixTronics

Жыл бұрын

Yes thay all are ok.. 0v isn't correct, it must be 3.3v

I have a tricky one. Asus q501la - i found a shorted 1uf cap. Replaced it It was in parallel with another 10uf cap. Got everything working great but realized on a charger the battery will stay at %. It will run with or without battery with charger. When unplugged battery drains normal, but plugged in only maintains current level never charges. It is not charger, it is not battery. It cannot be inside windows / drivers. Wont charge even if off. It will boot up hours later with whatever charge its on. I tried 2 new batteries that came with around 70% charge, which is why I know it will eventually get to zero if i ran enough without charger. What communicates to open up the pathway to send charging voltage to battery?

@FixTronics

10 ай бұрын

Hi brother Try replacing the BQ chip and while at it check the charging Mosfets The battery communicate with EC chip about its charge level and how much current it requires to be recharged and then EC chip will send commands to the BQ ic, then the BQ ic will start driving the charging Mosfets...

@TechProFury

10 ай бұрын

So... i replaced the Charging ic since it was a few bucks. No change, i tested the acdrv and was getting 19v. So i went back and sure enough the first dc mosfet was passing 19v, but when i tested the drain to src, it was .5ohm. Pulled a donor n channel mosfet from an dell board. After this the voltage on acdrv pin is now 23.5v. Not 25. But laptop is charging bat now. Should i worry about 23.5v on acdrv.

@FixTronics

10 ай бұрын

Glad you managed to have it fixed Don't worry about the 23.5v as long as it is higher than th input voltage (19v) I wish you all the best brother

@TechProFury

10 ай бұрын

@FixTronics thank you. Not sure i would have got this as the board was not a normal short and easily found without your valuable information. Hard to find this kind of info.

@FixTronics

10 ай бұрын

@@TechProFury I really appreciate it bro Thank you so much I wish you all the best

☺ I have a Asus X556U With Bat Mosfet burned, and BQ24780S off, I have change both, computer start to work ok, but it have a 7,6V battery, and I have 16v (phase) and on + of battery connector on board. If I install the battery the batt fet burn, I have tested with a new battery and do the same, I think the problema is the 16V on circuit with a 7.6v batt, the max voltagem must be 8,5v (I think). (note I install for second time a BQ24780s)

@FixTronics

Жыл бұрын

Hi friend Its most likely you have a bad high side Mosfet Try replacing it..

@kalukramerr

Жыл бұрын

@@FixTronics Hi, thank's for your attention, I have change all Mosfet, low and hi side, and battery charge mosfet too... problem remains

@FixTronics

Жыл бұрын

That is strange Ok try removing the high side Mosfet and check for that 16v at phase pin If it still there then remove the battery Mosfet and check again You might have fitted a faulty one because there is no way for that 16v to reach phase pin except from those two Mosfets

@kalukramerr

Жыл бұрын

@@FixTronics Without Hi fet 0.8v. if I remove 3 fets Hi, LO and bat drv I have 8,2V...🙄

@kalukramerr

Жыл бұрын

@@FixTronics I have replace the two QM1830M3 (high and LOW) again...

Hello, Thank you, but don't waste your time. Do you know the IT8225VG-128? Your explanations help me a lot. Kind regards