Thanks for watching the video! If you want to learn more or need help, here are 3 options. 🔥FREE pdf download: The fundamentals of landscape lighting AND learn how you can make your lighting look professionally installed. course.aklighting.net/freepdfdownload ✅ Complete Start-to-Finish Course: Get affordable professional help so you can install your lights the right way. course.aklighting.net/diylandscapelightingstepbystepcourse 💻 Website: The One Stop for All DIY Landscape Lighting. diy.aklighting.net/homepage

@ronkeesing548

Жыл бұрын

Where can I purchase wiring connector covers?

@aklighting8292

Жыл бұрын

@@ronkeesing548 I get mine from my local irrigation store. I use Horizon and SiteOne

@ronkeesing548

Жыл бұрын

I’m in the UK I’ve tried some electrical suppliers who say they don’t know about wire nuts, however I did manage to get some from Amazon, I still can’t find the wire nut covers, can you please send a photo of these covers and what is their correct name to enquire about Thanks Ron

Good job! You covered several of the mistakes I will be making as I Install my landscape lighting. I will watch your other video and refer back to this one a few times before I begin.

@aklighting8292

3 жыл бұрын

Thanks! Good luck! I'd love to see how your lighting project turns out.

Thanks really helpful to me.

@aklighting8292

3 жыл бұрын

Glad it helped

Question. Im trying to string patio light in the horizon point pattern. Is it safe to cut and splice the light string and connect them with the waterproof covers? This way each string of lights are right length from house to the pole?

@aklighting8292

3 жыл бұрын

I've never done it before, but I don't think it'll be a problem.

Awesome this helped me so much with wiring. How do you wire them to the main line together if they are farther apart? Let’s say I have two lights in one bed and and the cord from the light is 18” to the main line. The other light has 18” too but is 24” from the main line. They are too far apart to wire together and then wire to the main line if this makes any sense.

@aklighting8292

4 жыл бұрын

I'll take a stab at it, I think I understand what you are saying. What you're going to have to do is use whatever excess wire you have from the light closer to the main wire and attach it to the light that is father away so it can reach the main wire. Example: The light that's close to the main wire might need 10 ft of wire, so the extra 8 ft can be connected to the other light's 18ft to make it possible to reach the main light 24ft away. Hope that helped!

@michaelk1519

4 жыл бұрын

Agreed! Super helpful!

How do you wire a T connection? The transformer is in the middle of the light run and i have 12/2 burial wire coming off the transformer. I need to run lights to the left and the right but am unsure of what type of connector to buy and also how to wire it. Any help would be appreciated.

@aklighting8292

3 жыл бұрын

Wiring a T connection is simple. All you need to remember is instead of connecting 4 wires (2 words and 2 rough), you are connecting 6 wires because there are now 3 wires instead of 2 wires. 1 wire from the transformer, 1 wire from the left side, and 1 from the right side. The best connectors are the Dryconn brand from a local irrigation store. Hope that helped!

Thanks for the video - a lot of professionals try and make it seem more difficult than you did. Giving it a try today :) (and ordering some waterproof covers right now too ;) )

@aklighting8292

4 жыл бұрын

I completely agree! Good luck!

@michaelk1519

4 жыл бұрын

How did it go? Curious.

@aklighting8292

4 жыл бұрын

@@michaelk1519 Yeah, how did it go?

What if one of my lights isn’t working? It’s the last one on the line of 6, took it apart and the wires are all corroded where it connects by the bulb. Is there a way to fix?

I know almost nothing about lighting but would like to. I looked inside a transformer yesterday at a system that was not working and one of the wire nuts was melted. Thoughts?!!

@aklighting8292

3 жыл бұрын

Do you have a halogen system not an LED system? Most of the time when I see this issue it's because the system is halogen and there is a lot of electricity going through those wires. If those wire start to touch inside the transformer, they will start melting the wire nut. Once the wire nuts (is) are melted and expose the wires, the transformer will shut off if any wires tough each other. If you have an old transformer with a fuse in it, you will need to replace the fuse. If its a newer transformer, you'll just need to flip the switch. But make sure no wires are touching and replace the wire nut. Hope that made sense.

What kind of direct burial wire do you use? LVL, UF, something else?

good afternoon my name is ronny moscoso I am an electrician and I am starting to do this type of work, my question is about the charges for these types of work, do you handle some costs? I will appreciate your help

I presume these waterproof wire connectors come in various sizes. What size are you suggesting for general use?

@aklighting8292

2 жыл бұрын

Yes they do, but the size I use are the easiest to find, any other size you'll have to special order. I would suggest using this size.

Standard practice (at least here in the west) is for the ribbed wired to be neutral and the wire with writing to be hot.

Very informative video! I am looking to purchase a low voltage transformer, any recommendations on which brand to choose which is reliable in your opinion?

I have a 12 watt, 100277 volts, Bullet Flood Light. The light has 3 wires. Can you recommend a proper direct burial wire I should use? (All the videos I see only have 2 wires).

@michaels.1387

10 ай бұрын

I will only have a single light that will be about 15 feet from the transformer. The application is for lighting my flag.

My issue: new wiring: all lights (8 led fixtures) new total 75 ft worked on first set up. Later that night tired to see how they looked and the first light in the chain is bright the secound is very dim the 6 other lights are not working. The wire is warm to the touch. ??

@DurpeeSlurpee

11 ай бұрын

Wire being warm to the touch is a sign of too much current running through too small of a wire. 2 solutions, use thicker gauge wire or increase the voltage at the tap. The other issue could be arcing at one of the connections, indicating a bad connection

What do you call those beige rubber that houses the wires

@aklighting8292

Жыл бұрын

They are called king innovation waterproof connectors.

I need to fix a light problem every time I turn the lights on it turns on but immediately pops the switch off back so I guess some of the wires it’s mistakes

I have landscape lights that have a red and black wire coming out. Does it matter which wire on a zipcord (rough vs letters) I wire each of those red and black wires to if I keep it consistent?

@aklighting8292

3 жыл бұрын

White is usually goes to the smooth wire (with letters) and the red goes to the rough if you want to keep it consistent.

@DurpeeSlurpee

11 ай бұрын

When you have a pair of red and black wires (in the USA,) usually red is hot and black is neutral. When the wires are the same color, smooth is hot and ribbed is neutral.

Adam , I doubt you'll see this but I saw you make a mistake . Those waterproof grease tubes your supposed to push the wires and wire nut all the way in so they coat the nut completely . The way your doing it, water can easily get to the exposed copper

How much do people charge to do landscape lighting

@aklighting8292

3 жыл бұрын

Usually ranges from about $150-$350 a light fixture. Most companies charge $250-$350. My company (AK Lighting) charges around $150, because I want to offer professional lights at an affordable price.

@XandoFootball

3 жыл бұрын

@@aklighting8292 Wow . So a 8 light job can be a cost of 1200$. How do you get people to go for that. I struggled to get someone to allow me to do it for 695 for 6 lights . . . . I had to cut down 100 dollars more just for her to do it. . . . Please help . . . I want to make this a career for me. I thoroughly enjoy installing landscape lighting. Im a journeyman electrician but I enjoy doing this more.

@aklighting8292

3 жыл бұрын

Honestly it depends on 3 things. 1 your geographical area and 2. (Which is more important) the wealth class of people you're installing lights for. I rarely install under 10 lights. Most of the times I do it's like pulling teeth to get paid the amount I charge. It's way easier to sell a 14- 25 light install and get paid for it than a 6-12 light install. 3. If you're an electrician installing lights on the side, you cant charge much because it's not what you're known for. Most people go to electricians because they dont want to pay full price and expect electrician to be A LOT cheaper. (Sude note) every electrician I've known who installs landscape lighting, stinks at it. They buy homedepot lights and put no thought in design. If I were you, I'd get pictures, reviews, and market lighting as a professional service you provide.

@XandoFootball

3 жыл бұрын

@@aklighting8292 Man this is such solid advice.

@XandoFootball

3 жыл бұрын

@@aklighting8292 And I assume Home Depot lights are crap? I bought your book on recommended lights - but I still wanted to ask - what would be wrong with lights from Home depot?

Jan ako magaling 😂😂🔥

Messy

3 times you incorrectly installed wires into the grease caps!! You didn’t push them into the grease… isn’t this suppose o be an instructional video?

@aklighting8292

2 жыл бұрын

You're 100% right. I didn't show how it was supposed to be installed. This was one of my first videos I made and made a mistake. Thank you for pointing it out! I'll make another video to correct this.

@FixItWithMe

Жыл бұрын

??? I’m confused now

Hi watching from England. No1 what the Bloody hell is that yellow thing? How is that a Permanent/Safe Connection? No2 what the Bloody hell is that Penis shaped thing? I know only 12v but this Really doesn't look safe. You can't have bare wires showing incase someone touches them!!

@aklighting8292

3 жыл бұрын

HAHAHA! That comment gave me a good laugh. Yes, those connectors have a funny look to them ha. No1. Those yellow things are wire nuts...the name doesn't help my case. They are a very common part of wiring. No2 The funny shaped thing is a waterproof connector, and they are safe to use and bury in your ground. No bare wires. Everything is safe, and because it's low voltage.

Actually, I’m sorry but I am completely new to landscape lighting. Did a little research but you are wrong in that you have to wire the wires with writing or rough edges together. All you have to do is wire anything to anything as long as everything is connected that’s all that matters even on the transformer end I paid no attention to what wires I was using on a huge run and everything works perfectly. You don’t have to pay attention people. This guy doesn’t know what the hell he’s talking about. I can’t believe he worked in a professional business for years, you do not need to wire certain types of wires or rough or smooth or whatever just connect everything up and you’re good to go