Looking insane! What a grate build!

@Crawlerer79

2 жыл бұрын

Thanks man! Appreciate it!

That looks soo good!!

Truck looks sick

Truck looks sick, great explanation of why you got them and comparison to your old tyres.

@Crawlerer79

2 жыл бұрын

Thanks! Should have them out being tested soon!

Very interested to see your bump stop setup once you get it sorted

Bit of a Garden edging will do the trick but you could do a custon metal flat flare

Ohhh the silicone on the guards is great fun same thing with mine when I done snorkel thought It may have been factory

@Crawlerer79

2 жыл бұрын

Someone else in the comments said it is 🤷‍♂️ I hadn’t come up against it before though. Either way, it sucks!

Truck is looking good mate. You probably already know but you will need to adjust the pressure limiting valves on the front to match the adjustment to the steering stops.

The fenders come stock glued it’s to stop noise what I do is take a flat bales to most of it and start lifting it from the from the shape of the fender will stop it from warping also I have a 4in lift on my d1 with a bag on top so when there is air in the bags it’s a 6 inch on 35s and because of you I put a p38 trans cooler in my tow rig

@Crawlerer79

2 жыл бұрын

Interesting!!! Sounds like a sweet set up. And awesome, glad to hear it!

Nice Honda Crossroad mate!! 🤣

Look into Holden Jackeroo / Isuzu Trooper (not sure what they were called in NZ) rear bump stops, they have a nice tall progressive rubber bump stop that's an easy substitute for the Land Rover ones, I run them in my Range Rover and my Dad has them on his Discovery too.

@Crawlerer79

2 жыл бұрын

Awesome advice thanks! Just had a look at them, might have to pick up a set!

Flat dog 75mm flares from the UK 👍

@Crawlerer79

2 жыл бұрын

Did consider them but got a few ideas that should be a little more custom

Sic bud they be gd up thru coast areas

@Crawlerer79

2 жыл бұрын

For sure!

waterproofing video anytime soon? keen to see the treps in action

@Crawlerer79

2 жыл бұрын

Should be soon, have got the parts for it, gonna redo it on Lando and show the process. Just need some time now!

They would look good on the P38

@Crawlerer79

2 жыл бұрын

Hahah they sure would haha doubt they’d fit tho 😂 have got some new boots coming for it soon tho...

tough

where did you get that beanie from?

have you got any body lift under lando? i got 50mm body, 50mm sptings, extended bump stops and longer shocks and i can fit my 33s (10.0) under the guards with no chop .. mines disco2 though

@Crawlerer79

2 жыл бұрын

Nah I’m trying to keep it as low as possible (while having at least 5” of uptravel). More trimming and we’ll be fine!

Like to see how the mods go. Tray back to sought the rear ha ha

@Crawlerer79

2 жыл бұрын

Haha definitely keen to chop a disco one day but not Lando, it’s staying a wagon!!!

Que tipo de caixa de velocidades tem o teu discovery 1 ?? Tens algum matéria reforçado .. semieixo.. diferenciais.. etc.? Abraço da ilha Terceira, Açores, Portugal

How did you balance the tires? I have the same ones on my defender and they ride really bad.

@Crawlerer79

2 жыл бұрын

Just with normal wheel weights. They’re never going to be great on road however they’re significantly better than my old Silveys so I’m happy!

engine sound like 6bt5.9

Did you get em balanced dude any steering wheel shake??

@Crawlerer79

2 жыл бұрын

Yep, they balanced up okay and no wheel shake at all 👍

Are you running standard diffs under the disco?

@Crawlerer79

2 жыл бұрын

Rover axles with HD 4.11 gears, lockers and chromoly shafts and CVs, HD flanges. So still Land Rover, but not very Land Rover haha

@tristanpreece136

2 жыл бұрын

@@Crawlerer79 I need to do this to mine. I’ve got a 3 door discovery running 33’s at the moment

How do you have so many pre facelift disco's and are any manual?

@Crawlerer79

2 жыл бұрын

They’re actually quite common in NZ, and nah all autos

@westymotorsportengineering1915

2 жыл бұрын

@@Crawlerer79 up here in Auckland U can barely find any pre facelift disco's but my dad found on. It's a All original discovery 1 v8 auto pre facelift in white with the original centre console bag and it still has the factory filling paper stuff and the land rover strap for it.

What do the wof inspectors think about cutting up the body of it, do they care or not?

@Crawlerer79

2 жыл бұрын

Just have a chat with your cert man before doing anything, they’ll tell you what you can and can’t cut 👍

@rockabillyrebel9207

2 жыл бұрын

@@Crawlerer79 Yes hopefully you have a good Cert man as some are not happy about people cut that close to a door catch

Let’s hope mechanical components don’t get destroyed with the new huge tyres.

@Crawlerer79

2 жыл бұрын

Haha here’s hoping! Tbh I think the silveys broke most stuff so I’m pretty sure the chromolys will hold up to these!

I seen you today I did a u turn behind you in the red Pajero and I pulled into where you work

@Tasfarmer

2 жыл бұрын

What you got a old paj

@caleb9251

2 жыл бұрын

@@Tasfarmer 94 gen 2

@Tasfarmer

2 жыл бұрын

@@caleb9251 ah sweet I live in aus have a gen1 with coil rear goes pretty good

Stock diff pinions and gear?

@Crawlerer79

2 жыл бұрын

HD 4.11s, basically built axles so these shouldn’t (fingers crossed) cause any issues!

4.11 diff's are ok with 35" tires? The Disco comes with 29"!

@Crawlerer79

Жыл бұрын

Yep, pretty good! 4.11s work out as the correct ratio for about a 34”, so ever so slightly overgeared. If I was doing it again I’d run 4.37s

How tf do you get a wof with those?!

@Crawlerer79

2 жыл бұрын

Will be going for cert on them soon 👍

Yeewwww first in!

@grahameroberts8109

2 жыл бұрын

Do you expect a prize?

@matthewlax919

2 жыл бұрын

@@grahameroberts8109 nah just excited for some new content. This young bloke inspires me to get out more and use what I have built.

@Crawlerer79

2 жыл бұрын

Cheers for the support man appreciate it!!!

Hi Do you need some great lighting for your car to help you better driving, off-road. We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!

What's your IG?

@Crawlerer79

2 жыл бұрын

@timparkin19 👍