Nobody ever posts a video of these things actually working.
@lurtbike
5 ай бұрын
Skip to the end of the video. It was too muddy today to really do much. I’ll post one of it working as soon as it dries out enough to not just be tearing my yard to pieces.
@garyp1930
5 ай бұрын
@@lurtbikeyour right just endless talking and spin in circles but does it move dirt or can u work with it, every video the same. This guy is good no offense to him thanks
@usmcmohammad
10 күн бұрын
@@garyp1930 yes it moves dirt
@SeriousAboutAudioКүн бұрын
I just bought one of these BC380s after owning a HY380 and the quality was better on the wheeled machine. My main complaint is that it's a pain to fuel up, just wondering if you or anyone have added a neck to the gas tanks for easier fueling?
@jtsokiehobbyandadventures66664 ай бұрын
I have replaced 4 fuel filter. I put 12 volt fuel pump. Only have 3 hours on it right now. Will wait see how it works now. My fuel gas cap was bad. Mine did keep dieing after 15 min of use
@AndrewObornyАй бұрын
How much did you pay for it? Or what would a good price be for one?
@lurtbike
Ай бұрын
I think I paid $5300 out the door at auction. I feel like anything under $6k is probably a decent buy.
@moveitjunk2 ай бұрын
Do you know what the issue could be if the tracks won’t move? It seems like it tries to spin but it stops after an inch. Won’t go in reverse at all unless we push it .
@lurtbike
2 ай бұрын
I’ve heard drive motor seals can go bad if there’s metal in the hydraulic system. People are replacing drive motors with a higher quality equivalent and buying seals to rebuild their existing drive motors. I don’t have much detailed info as I haven’t had that problem.
@steveturcotte74355 ай бұрын
I just bought one too, would love to find a service manual, I don’t see how the battery can be changed yet
@lurtbike
5 ай бұрын
Yeah me too. I’d love a wiring diagram.
@mikedesilets3324
Ай бұрын
Mine came with a very basic owner's manual. It covers basic operation, break in, fluid and filter change intervals
@MR-gp9ys3 ай бұрын
Do you know if these chinese mini skid steers come filled with hydraulic fluid, if not do you know which one they need i just bought an agt yrst14 and suppose to pick it up this week from the auction. Its brand new unused.. Not sure if i need to bring some with me..
@JamesSmith-hm8wp
3 ай бұрын
They put bare minimum in every machine. It will work but you have 10 more issues to take care of rather than hydro fluid. You have to do a full fuel clean out and usually change filters and blow out lines.
@lurtbike
3 ай бұрын
Yes they come with hydraulic fluid. I was able to drive mine onto the trailer at the auction yard. I brought gas with me and put a little in the tank and it fired right up. I’ve never heard of one not having hydraulic fluid in it. They drive them into the crates at the factory I believe, meaning they have fluid in them.
@MR-gp9ys
3 ай бұрын
@@lurtbike thank you
@JessicaDeatrickАй бұрын
Do you know how to tighten or replace a track that’s fallen off?
@lurtbike
Ай бұрын
Yes I do. Pull the grease fitting out at the track with the large nut and take a shovel and wedge it between the front pulley and the bucket and push the pulley back. Then use 3 or 4 1-1/4” diameter sticks in every other tooth of the track to guide it back on the pulley. There are KZread videos others have made. You have to jack the machine up.
@usmcmohammad
10 күн бұрын
did you get it back on I just figured how to do this with no tools.
@MartiColin-ku2op2 ай бұрын
Como cambiar el filtro del aire
@steveturcotte74355 ай бұрын
So with the oil cooler on the back like mine there is no access to remove the battery, other models the engine is further back for battery access. Also thinking the 4 bolts through the rubber motor mounts are for shipping, mine are loose.
@lurtbike
5 ай бұрын
How loose? I imagine they want the motor to move a little to reduce vibration. I can’t imagine they expect you to remove the motor and put it back in without the vibration isolating mounts. You can probably remove the straps for the battery and twist it 90 degrees to get it out beside the hydraulic pump. Not easy but not impossible I don’t think.
@steveturcotte7435
5 ай бұрын
@@lurtbike falling out and they have a lock washer on them
@steveturcotte7435
3 ай бұрын
@@lurtbike will be looking forward to a video on that
@vanglisa5 ай бұрын
Anyone know where I can get the manual? What kind of gas and oil did you use?
@lurtbike
4 ай бұрын
10w30 conventional oil and ethanol free 87 octane pump gas
@thecommercialpilot5 ай бұрын
What model drainzit hose? Or do you remember what the fitting size is?
@lurtbike
5 ай бұрын
1412-18
@mikedesilets3324
Ай бұрын
12mm-1.5 threads.
@reneagonzalez30444 ай бұрын
Donde va conectada la manguera de retroceso
@lurtbike
3 ай бұрын
No hablo espanol. You mean the fuel pump? It’s in the fuel line down low near the fuel tank. I kept the original vacuum fuel pump on there as well.
@garyfulbright17074 күн бұрын
2 hours on it and he changed the oil😅
@lurtbike
4 күн бұрын
Well the motor blew at 5 hours so maybe I should have done it earlier 🤷🏼♂️. Going strong with the Predator 670 now though!
@salvadortorres51435 ай бұрын
Where can I buy one like that machine?
@lurtbike
5 ай бұрын
Look at auction houses. Richie Brothers or other local construction equipment auctions.
@firstname6208
4 ай бұрын
I have one for sale, Charlotte NC.
@ChoicesAndTradeOffs-tt3rp14 күн бұрын
Is there anybody out here that will say the exact amount they frickn paid for it? With the items included or not? I tell you it's amazing in the lack of brains out there. I could care less about anything other then total cost cause I will fix any little problem and make it better. I need to know process and total cost, TOTAL, THAT MEAN EVERY DIME YOU SPENT ON IT...
@lurtbike
13 күн бұрын
$4700 out the door. $1200 a few weeks later for a predator motor. $600 for a grapple a few weeks after that. Since the predator swap at 5 hours I’ve been good. Got about 16 on it now.
@MartiColin-ku2op2 ай бұрын
Comocanviar erfiltro
@MartiColin-ku2op3 ай бұрын
Cuatos galones deaseite llava elmotor
@lurtbike
3 ай бұрын
It takes 1.8L of 10w30 engine oil.
@williamgleaves19545 ай бұрын
Junk. The lift arms dont go all teh way down so that you can have the bottom of the bucket flat on the ground. Find another cheap Chinese one that does.
@lurtbike
5 ай бұрын
🤣 Works fine for me man. I’m just having fun digging in my yard I’m not trying to drop Cat money to move mulch and do some light grading and spreading gravel.
Пікірлер: 45
Nobody ever posts a video of these things actually working.
@lurtbike
5 ай бұрын
Skip to the end of the video. It was too muddy today to really do much. I’ll post one of it working as soon as it dries out enough to not just be tearing my yard to pieces.
@garyp1930
5 ай бұрын
@@lurtbikeyour right just endless talking and spin in circles but does it move dirt or can u work with it, every video the same. This guy is good no offense to him thanks
@usmcmohammad
10 күн бұрын
@@garyp1930 yes it moves dirt
I just bought one of these BC380s after owning a HY380 and the quality was better on the wheeled machine. My main complaint is that it's a pain to fuel up, just wondering if you or anyone have added a neck to the gas tanks for easier fueling?
I have replaced 4 fuel filter. I put 12 volt fuel pump. Only have 3 hours on it right now. Will wait see how it works now. My fuel gas cap was bad. Mine did keep dieing after 15 min of use
How much did you pay for it? Or what would a good price be for one?
@lurtbike
Ай бұрын
I think I paid $5300 out the door at auction. I feel like anything under $6k is probably a decent buy.
Do you know what the issue could be if the tracks won’t move? It seems like it tries to spin but it stops after an inch. Won’t go in reverse at all unless we push it .
@lurtbike
2 ай бұрын
I’ve heard drive motor seals can go bad if there’s metal in the hydraulic system. People are replacing drive motors with a higher quality equivalent and buying seals to rebuild their existing drive motors. I don’t have much detailed info as I haven’t had that problem.
I just bought one too, would love to find a service manual, I don’t see how the battery can be changed yet
@lurtbike
5 ай бұрын
Yeah me too. I’d love a wiring diagram.
@mikedesilets3324
Ай бұрын
Mine came with a very basic owner's manual. It covers basic operation, break in, fluid and filter change intervals
Do you know if these chinese mini skid steers come filled with hydraulic fluid, if not do you know which one they need i just bought an agt yrst14 and suppose to pick it up this week from the auction. Its brand new unused.. Not sure if i need to bring some with me..
@JamesSmith-hm8wp
3 ай бұрын
They put bare minimum in every machine. It will work but you have 10 more issues to take care of rather than hydro fluid. You have to do a full fuel clean out and usually change filters and blow out lines.
@lurtbike
3 ай бұрын
Yes they come with hydraulic fluid. I was able to drive mine onto the trailer at the auction yard. I brought gas with me and put a little in the tank and it fired right up. I’ve never heard of one not having hydraulic fluid in it. They drive them into the crates at the factory I believe, meaning they have fluid in them.
@MR-gp9ys
3 ай бұрын
@@lurtbike thank you
Do you know how to tighten or replace a track that’s fallen off?
@lurtbike
Ай бұрын
Yes I do. Pull the grease fitting out at the track with the large nut and take a shovel and wedge it between the front pulley and the bucket and push the pulley back. Then use 3 or 4 1-1/4” diameter sticks in every other tooth of the track to guide it back on the pulley. There are KZread videos others have made. You have to jack the machine up.
@usmcmohammad
10 күн бұрын
did you get it back on I just figured how to do this with no tools.
Como cambiar el filtro del aire
So with the oil cooler on the back like mine there is no access to remove the battery, other models the engine is further back for battery access. Also thinking the 4 bolts through the rubber motor mounts are for shipping, mine are loose.
@lurtbike
5 ай бұрын
How loose? I imagine they want the motor to move a little to reduce vibration. I can’t imagine they expect you to remove the motor and put it back in without the vibration isolating mounts. You can probably remove the straps for the battery and twist it 90 degrees to get it out beside the hydraulic pump. Not easy but not impossible I don’t think.
@steveturcotte7435
5 ай бұрын
@@lurtbike falling out and they have a lock washer on them
@steveturcotte7435
3 ай бұрын
@@lurtbike will be looking forward to a video on that
Anyone know where I can get the manual? What kind of gas and oil did you use?
@lurtbike
4 ай бұрын
10w30 conventional oil and ethanol free 87 octane pump gas
What model drainzit hose? Or do you remember what the fitting size is?
@lurtbike
5 ай бұрын
1412-18
@mikedesilets3324
Ай бұрын
12mm-1.5 threads.
Donde va conectada la manguera de retroceso
@lurtbike
3 ай бұрын
No hablo espanol. You mean the fuel pump? It’s in the fuel line down low near the fuel tank. I kept the original vacuum fuel pump on there as well.
2 hours on it and he changed the oil😅
@lurtbike
4 күн бұрын
Well the motor blew at 5 hours so maybe I should have done it earlier 🤷🏼♂️. Going strong with the Predator 670 now though!
Where can I buy one like that machine?
@lurtbike
5 ай бұрын
Look at auction houses. Richie Brothers or other local construction equipment auctions.
@firstname6208
4 ай бұрын
I have one for sale, Charlotte NC.
Is there anybody out here that will say the exact amount they frickn paid for it? With the items included or not? I tell you it's amazing in the lack of brains out there. I could care less about anything other then total cost cause I will fix any little problem and make it better. I need to know process and total cost, TOTAL, THAT MEAN EVERY DIME YOU SPENT ON IT...
@lurtbike
13 күн бұрын
$4700 out the door. $1200 a few weeks later for a predator motor. $600 for a grapple a few weeks after that. Since the predator swap at 5 hours I’ve been good. Got about 16 on it now.
Comocanviar erfiltro
Cuatos galones deaseite llava elmotor
@lurtbike
3 ай бұрын
It takes 1.8L of 10w30 engine oil.
Junk. The lift arms dont go all teh way down so that you can have the bottom of the bucket flat on the ground. Find another cheap Chinese one that does.
@lurtbike
5 ай бұрын
🤣 Works fine for me man. I’m just having fun digging in my yard I’m not trying to drop Cat money to move mulch and do some light grading and spreading gravel.
@adriansowden138
5 ай бұрын
well said that man@@lurtbike