I specifically work on the smaller scale RC's....1/24, 1/18 and soon 1/32nd. But, I have big sausage fingers from working on full size 1/1 scale....but there is an innocence and truth to making something so small scale. I also grew up with slot cars. I still have all my father's 1/32nd and my 1/24th scale cars....Just waiting for the right moment to convert them into RC's. Great video.......Yes, they all are a bit squirrelly.

They are so challenging to drive. My local hobby shop has a track. Tires are everything.

Cool that you got into this. I've been looking at these for a while. Driving will come with time. I used to race 1/10th on carpet track back in the day. I was horrible at first but got better over time. Just takes some practice. Stick with it, you'll get there! Look forward to seeing more on these.

That’s a cool little drifter! Love the challenger body on it! Lol 😂 your dog wanted to play with it too! 👌😂👍

Oh buddy! You gut suckered in to the MiniZ vortex!!!! Good times! It's not cheap, that's for sure but it is so much fun. And you don't need a huge facility to set up a track. It's great fun, and the scale factor just rocks, these hard bodies are awesome. Looking forward to your next MiniZ videos. You are going to have fun.

You can find lipos with an empty battery. Sounds weird but check it out. Of the 4 only 2 are batteries and 2 are blanks and empty and only serve as connector and you leave them in the car, so you only need to swap the exterior ones.

My dog wouldn't have any of that. I've been thinking about getting one any way. thanks for posting , they look like a blast.

Nice of SHAKA to host the Ronnie Milsap Invitational 😎……jokes aside nice models

I have a customized 4x4 mini-z 4runner... made a roofrack, 3d printed some accessories like a hoodlight, some birdskulls, a full exhaust with headers visible in front wheel arches... I also chopped and remade the bottom of the rear end and moved the bumper up a bit to give it better departure angles, drilled some bulletholes and weathhered it wit alot of rust paint...... it looks like something from madmax.... Oh, and I built a whole moonshiners shed on a trailer for it out of lollipopsicle sticks..... it has upgraded suspension and I used soldering wire to wrap the axles for lower cg... and then gave it some 3d printed adapters so I could buy slightly bigger scx24 wheels. I just love the fact it runs on AAA batteries wivh I allways have available in my electricians workvan. No lipo recharge fire hazard. Long runningtime and small enough I even often bring it with me in my motorcycle sidebag. recently had it with me on a 1000 miles roadtrip on my '86 Suzuki Bobber! :D

@RCeveryday

Жыл бұрын

Heck yeah!

I put a 1/25 square body Chevy body on one of those mini z

@500hplee

Жыл бұрын

thats awesome!!! you use a plastic model body?

@vinnie379l4

Жыл бұрын

@@500hplee ya u bet 1/25 scale deserter model kit it’s the black 4+4 with a rwd mini z only thing I did was custom make the tbar to adjust the wheel base

@500hplee

Жыл бұрын

@@vinnie379l4 I have that one too, great idea ! appreciate the response .

Aircraft mechanics kept those original Tamtech cars in their roll-a-ways at LAX during my Continental Airlines days. They would race them at lunchtime the standard regulation track was a Boeing 727, preferably a 200 series, travel around the nose gear over behind the left side maingear across to behind the right side gear and back to the nose. I think they got about ten laps out of the batteries. The thing about those Tamtechs was they were 1/24-25 size and had a couple of positions for the wheelbase or different lengths of chassis. So a couple of these guys had put model kit NASCAR bodies on them and they looked really good. The other thing I saw with Tamtech chassis was mounting the lexan large scale slot car bodies on them because they weighed less. I looked up the scale of these Kyosho cars and the scale is 1/27-28th. Wish they were a bit larger. Challenger looks so good!

@williamsaloka9043

Ай бұрын

The point is actually to keep them small. They do race 1/18 if you want larger.

Yeah I can’t believe most of those offer better appearance than some of the RC4WD hard bodies.

I've got tracks ordered to start racing at the shop (Remote Control Hobbies - Orlando), but they're on backorder... Apparently, the RWD is MUCH better to race on the tracks, but the AWD is good for parking lot stuff. At least, so I've been told by the Mini Z guys. As long as you're having fun, that's what counts. Skills will come with time and experience. Way to read the instructions!!!! Always RTFM. lol Oh boy, it looks like they're going to be tons of fun to work on for guys like us with tremors... 🤣 The poor dog was not happy. She did well not attacking it, though! lol

awesome! once u put in a front one way and rear diff(glue) , it works soo well for drifting, no need for a gyro at all with the awd. I'm super keen for building and drifting these 1/28 performance chassis '. keep it up man!

Congrats Josh! Those are such sweet little rigs! I'd love to see you put your personal touch on one by using a model car or truck body! Maybe make a rat rod or possibly a resto mod or something like that! 🤔👍

Great vid. Thanks man.

Mini zs are freakin awsome! But hella expensive.. The bodies are unreal. Its def a big collerctors game for them bodies grab them while u can lol

Yer I’m right in to the mini z . I use the NB4 you need to buy the mini z chip and I run all 17 of my mini z. After you will look into the XRX and drift art unbelievable cars✊👌

I bought so many of these from RadioShack didn’t think they would ever stop making them, but they did RadioShack was so good

I got 2 WLToys 1:28 RTR for $60.00 each .. Double wishbone and independent suspension on all corners . Differentials front and back , lipo 7.4V 400mah , remote , just a better deal to me VS. Kyosho stuff.. modded so i have one AWD and one RWD with gyro.. they are a blast ! The new WLtoys Drift Truck has the upgraded remote , USB charger , and lights ..

@RCeveryday

Жыл бұрын

Nothing wrong with that at all!

I think you gyro is in wrong side up ! I have joined the Mini-Z shenanigans recently even bought a mini96 RCP track for Christmas. Lol

I still have a spare under glow the clip on the side it’s in green light

Go to target and check out the hex mod tuner cars if you like the mini z’s. Not as electronically tunable but does come with two diffs for awd drifting. The amount of stuff you get for money is unreal

@booboomarshburn1577

Жыл бұрын

They are proportional,I would put my hex mod against a gyro less mini z.

@booboomarshburn1577

Жыл бұрын

I wanted to make sure I liked that scale of rc before I bought a mini z. I ended up really enjoying both kits way more than I expected.

I drift my mini z rwd skyline indoors at home in winter or rainy days. remove the mirrors ahahah Still need to change the front springs. You might want to check other you tubers like beaver's hobby Check out ds racing drift tires(hard) depending on surface you might need one or the other number. I go with of 3 or 4 for indoor hardfloor Also to drift you might want to check the kyosho set of wheels, with all the offsets imaginable to fit all needs and bodies. Around 25-30 bucks if I remember well. Last, Get the kyosho set of springs front and rear, definitely needed to tune the behaviour. I swapped my t link in the back for some carbon ones. They came in a kit I think from Amazon, and had like 3 T of different stiffness, it also helped with my rwd drifter and more consistent behaviour I also swapped my rear with a kyosho ball diff which can be put more or less stiff. And last but it's an old saying but oh well awd is power slide, rwd is drift.

I’d buy one of these but they’re so expensive for a tiny car

Cool to see you getting into the micro cars. So just a matter of time before we can start sending you some of our super scale 1/24 chassis' right? 😁

@RCeveryday

Жыл бұрын

Haha! I have to get my modeling skills up to par first. Partly why I am so partial to 1/10, my shaky hands use to try the 1/24, but couldnt get near the quality paint I've seen on your channel.

Josh if I lived in America near you I would crawl,trail,drift and race all the time. I need people to do it with, the hobby has dropped off here because the prices are most of the time double from you guys pay which sucks.

Puppers wants to play

How does the RWD model run on a non-track surface?

@RCeveryday

8 ай бұрын

on slick concrete its pretty tail happy.

Hello I'm a little late but I'm new so should I buy one? I mostly have wood flooring so will this work well?

@RCeveryday

Жыл бұрын

These work well on wood floors

How much does these cost together?

@RCeveryday

Жыл бұрын

The rear wheel drive cars cost $180 the AWD around $200