Changing the restricted boss and rollers of a Kymco Agility 50cc. This will increase your bike speed my 5-10mph. Check out my channel for more derestriction videos.
Жүктеу.....
Пікірлер: 94
@BioMess6 жыл бұрын
this must be how my jonway 50cc is restricted... thx for the vid, Ive been looking for this info.
@timr6176 жыл бұрын
I had to watch this on mute so I wouldn't start screaming
@micheljuriq2790
5 жыл бұрын
:D :D :D
@tom1900to20008 жыл бұрын
Good god this music is killing me
@rkl2485
5 жыл бұрын
Dude I was about to comment the same f*cking thing when I saw your comment. Terrible track selection, lol. MUTE.
@sullie35
5 жыл бұрын
It sucks. Not worth watching his video
@ClinesMindMetal
3 жыл бұрын
@Nasir Ameer no one does give a shit so stfu.
@rwijgman87812 жыл бұрын
easy and well displayed video but tell us how manny gram the rollers and the inpakt it has i have a kymco super 8 only modified cdi(when i bought )it so 50 cc 6.5 gram vario rollers and drive 70 km a 65 when i got wind against me
@johndk88 жыл бұрын
Hey mate great video, are you able to provide links to where you ordered the parts from?
@flexbrah98807 жыл бұрын
Or What is the optimal deristricted roller weight?
@etoshiro10214 жыл бұрын
where do you find the 10 screw like the smallest one?
@MrCurt546614 жыл бұрын
Which weight rollers did you go with and top speed?
@burakkaraatepe52083 жыл бұрын
What do the grounds of drive rounds
@goncalocunha87172 жыл бұрын
Did you change the variation or did you just clean it?
@jamesconner34373 жыл бұрын
what torque power for putting the nut back on at 5:10.....and I'll not mention the music...lol.
@mokebang75264 жыл бұрын
Thank you!
@darthjar9117Ай бұрын
So what does replacing these parts do to the scooter?
@iratenews1753 Жыл бұрын
What size rollers do I put in 50cc to make faster up hill its going 15 miles sometimes slower please help it was faster before I swapped the variator. Old variator kept destroying belt
@VisitorE.T. Жыл бұрын
how much increase your speed on your scooter ?
@addeade2314 жыл бұрын
Kymco new like II 50i??? same ???
@flowdkalle4650 Жыл бұрын
U have the link to buy the rollers
@user-ic2wi6hv5n10 ай бұрын
Hizli gitmesi icin nekadar ağırlık takmamış lazim ?
@wowandre12109 жыл бұрын
Wont loctite just seal it so hard it will be hard to open again? And does the agility RS have the same parts? So this tutorial includes agility RS too?
@TheDragorin
5 жыл бұрын
blue loktite can be overcome easily enough by a bit more force. red loctite is supposed to require heat to remove altho ive broken red loctite by hand several times.
@slahoudi86146 жыл бұрын
كيفية نزع الروداج kymco agility 50c fr
@joeceppetelli98916 жыл бұрын
Hi, what is the size for the tool used to remove the casing at the start of the video? Can anyone help
@quinthijssen5509
6 жыл бұрын
Joe Ceppetelli 8
@robwyatt96039 жыл бұрын
better loctite it than the variator flying off whilst riding
@eliaslundstedt56074 жыл бұрын
I kinda took this apart for no reason when I found out that it's a lathed edge, and not a loose ring. fuck. also I forgot to put the washer back behind the bolt. Should I put it back?
@evillain9998 жыл бұрын
where is the pipe 0:50 connected? i haven't such a pipe attached at this casing.
@zerocool6452
5 жыл бұрын
It's just an air inlet for the fan in the CVT housing.
@xid4448 жыл бұрын
what is it with the restriction boss does he replace it? pulls it out of nowhere?
@timr617
6 жыл бұрын
mitchel asscheman he pulled it out of his ass
@jensmartinhedegaardanderse767
5 жыл бұрын
When he removed the variator he also removed the boss
@coykirkpatrick42737 жыл бұрын
Is there a link to where you bought the new parts from?
@RimjobHimself
2 ай бұрын
AliExpress
@burakkaraatepe52083 жыл бұрын
Kymco Agilitiy 50 CC Variator Rollers Weights How many grams help please
@vladimirl3065
3 жыл бұрын
Standard rolls are 6.5 grams. For a higher maximum speed 7-7.5 grams are recommended
@jamesflint4608 жыл бұрын
Do you have to use an impact gun ?
@colinshard8665
6 жыл бұрын
not necessarily, it just makes the work easier and quicker but you can also do it by hand, i did it with my old 2-stroke that uses the same drive system, and working without an impact wrench, will mean you have to buy a special tool to immobilize the starter wheel so you can apply the strength to undo it
@AMAZINGPCGRAPHICS5 жыл бұрын
Will this destroy your piston quickly? already de-restricted it from 28mph to 40mph with the CDI unit, after some googling seen this upgrade will make it do 48mph.
@alien_man1669
5 жыл бұрын
I derestricted mine and I sometimes see 45 already. Im waiting on putting this in with the a9 camshaft because my understanding is you need to upgrade the valve springs as I've heard someone blowing theirs to hell when they hit 50. I've already hit 50 momentarily with just the cdi and it didn't sound too good :edit valve springs not piston springs
@alien_man1669
4 жыл бұрын
@@joshkaylor3250 yes I bought a new one. I initially pulled the wire and then cooked my whole wire assembly dropping the wire to ground and to boot the wire cutting method didn't even work
@caiwilliams1441
4 жыл бұрын
Do you have the new agility 50
@caiwilliams1441
4 жыл бұрын
And how do you de restrict it with the cdi I can’t seem to find the small black box and I have the 2018 kymco agility
@caiwilliams1441
4 жыл бұрын
john papajohn f
@colinshard86656 жыл бұрын
what size and weight are the rollers, i have the exact same bike, even down to the colour are they 15x12,or 16x13? or 18x15?
@jyriniskanen5724
6 жыл бұрын
Colin Shard 16×13
@flexbrah98807 жыл бұрын
What does the rollers weight?
@JKV.
4 жыл бұрын
7g
@jindra66 Жыл бұрын
Hi nice video however never put lock tight on crankshaft!
@caiwilliams14414 жыл бұрын
Did you do anything with the cdi?
@banaanqwerty4242
4 жыл бұрын
Have you even watched his channel
@Meneer.Luiten8 жыл бұрын
how mutch grams is it
@robbet7963
3 жыл бұрын
Got the same question
@roynijmeijer42525 жыл бұрын
What size were those new Rollers?
@JKV.
4 жыл бұрын
7.0g
@jerrybanks92163 жыл бұрын
I barley got to 1:07 didn't realize i was on a radio channel shit I was looking for info
@Ziclickdu348 жыл бұрын
whats the reference of the rollers ?
@colinshard8665
6 жыл бұрын
checkout this link:www.virijavara.fi/kauppa/data/Variaattorirulla_koot.pdf this gives you the standard fitted size and weight of the rollers for your type of bike, the agility 50cc 4-stroke is fitted standard with 16x13 6,5 gram rollers
@kasperjachimczuk58994 жыл бұрын
does this also work on a kymco agillity 50 16+
@faabberg
4 жыл бұрын
6.3 grams
@addeade231
4 жыл бұрын
What about Kymco II Like 50i (the new kymco like)????
@claudiorebeiro36329 жыл бұрын
Is the boss 37 mm or 38 mm?
@daand12
9 жыл бұрын
Claudio Rebeiro 38mm
@claudiorebeiro3632
9 жыл бұрын
daand12 Thanks
@fs-rj2jq4 жыл бұрын
Why is the impact gun so important? I'm sure it can be done without it
@banaanqwerty4242
4 жыл бұрын
Bcs if u do it wrong without you will easily break the moped
@leejones3061
4 жыл бұрын
I'm trying to do it this min with. A socket got no chance
@SuperBongface5 жыл бұрын
V/10 A/.007 Hit mute at the beginning of this or .... trust me just hit mute and read through it for a happier life ;)
@michelleblau72877 жыл бұрын
What weight of rollers are you suggesting? I have a Kymco 50cc Super 8 50x... I see that the smooth boss is a 38mm... I just need to know what weight of rollers. Thanks
@elikiley1765
5 жыл бұрын
Michelle Blau it depends what you are trying to achieve m, fast takeoff or faster overall speed. Lighter I better for faster takeoff but for a more reliable and faster speed heavier is better
@jerrychaps83713 жыл бұрын
this is the kind of music scooter people listen to
@dis_fawkn_guy9836
Жыл бұрын
no just this guy
@RellyOhBoy4 жыл бұрын
Glad my mute button works...
@JazzyLocke5 жыл бұрын
Good video-----horrible choice of music!
@JazzyLocke
5 жыл бұрын
@Jose Alexander LOL!
@cowlumbus5 жыл бұрын
Wtf is going on with his music...I cannot make it through the video!!!
@leobirgenheier79866 жыл бұрын
Where in the H did you get the horrible background noise. PLEEAASSE eliminate it.
@chaunceyhulbert72643 жыл бұрын
My God this music is absolutely fuckin awful. I hope the video is informative.
Пікірлер: 94
this must be how my jonway 50cc is restricted... thx for the vid, Ive been looking for this info.
I had to watch this on mute so I wouldn't start screaming
@micheljuriq2790
5 жыл бұрын
:D :D :D
Good god this music is killing me
@rkl2485
5 жыл бұрын
Dude I was about to comment the same f*cking thing when I saw your comment. Terrible track selection, lol. MUTE.
@sullie35
5 жыл бұрын
It sucks. Not worth watching his video
@ClinesMindMetal
3 жыл бұрын
@Nasir Ameer no one does give a shit so stfu.
easy and well displayed video but tell us how manny gram the rollers and the inpakt it has i have a kymco super 8 only modified cdi(when i bought )it so 50 cc 6.5 gram vario rollers and drive 70 km a 65 when i got wind against me
Hey mate great video, are you able to provide links to where you ordered the parts from?
Or What is the optimal deristricted roller weight?
where do you find the 10 screw like the smallest one?
Which weight rollers did you go with and top speed?
What do the grounds of drive rounds
Did you change the variation or did you just clean it?
what torque power for putting the nut back on at 5:10.....and I'll not mention the music...lol.
Thank you!
So what does replacing these parts do to the scooter?
What size rollers do I put in 50cc to make faster up hill its going 15 miles sometimes slower please help it was faster before I swapped the variator. Old variator kept destroying belt
how much increase your speed on your scooter ?
Kymco new like II 50i??? same ???
U have the link to buy the rollers
Hizli gitmesi icin nekadar ağırlık takmamış lazim ?
Wont loctite just seal it so hard it will be hard to open again? And does the agility RS have the same parts? So this tutorial includes agility RS too?
@TheDragorin
5 жыл бұрын
blue loktite can be overcome easily enough by a bit more force. red loctite is supposed to require heat to remove altho ive broken red loctite by hand several times.
كيفية نزع الروداج kymco agility 50c fr
Hi, what is the size for the tool used to remove the casing at the start of the video? Can anyone help
@quinthijssen5509
6 жыл бұрын
Joe Ceppetelli 8
better loctite it than the variator flying off whilst riding
I kinda took this apart for no reason when I found out that it's a lathed edge, and not a loose ring. fuck. also I forgot to put the washer back behind the bolt. Should I put it back?
where is the pipe 0:50 connected? i haven't such a pipe attached at this casing.
@zerocool6452
5 жыл бұрын
It's just an air inlet for the fan in the CVT housing.
what is it with the restriction boss does he replace it? pulls it out of nowhere?
@timr617
6 жыл бұрын
mitchel asscheman he pulled it out of his ass
@jensmartinhedegaardanderse767
5 жыл бұрын
When he removed the variator he also removed the boss
Is there a link to where you bought the new parts from?
@RimjobHimself
2 ай бұрын
AliExpress
Kymco Agilitiy 50 CC Variator Rollers Weights How many grams help please
@vladimirl3065
3 жыл бұрын
Standard rolls are 6.5 grams. For a higher maximum speed 7-7.5 grams are recommended
Do you have to use an impact gun ?
@colinshard8665
6 жыл бұрын
not necessarily, it just makes the work easier and quicker but you can also do it by hand, i did it with my old 2-stroke that uses the same drive system, and working without an impact wrench, will mean you have to buy a special tool to immobilize the starter wheel so you can apply the strength to undo it
Will this destroy your piston quickly? already de-restricted it from 28mph to 40mph with the CDI unit, after some googling seen this upgrade will make it do 48mph.
@alien_man1669
5 жыл бұрын
I derestricted mine and I sometimes see 45 already. Im waiting on putting this in with the a9 camshaft because my understanding is you need to upgrade the valve springs as I've heard someone blowing theirs to hell when they hit 50. I've already hit 50 momentarily with just the cdi and it didn't sound too good :edit valve springs not piston springs
@alien_man1669
4 жыл бұрын
@@joshkaylor3250 yes I bought a new one. I initially pulled the wire and then cooked my whole wire assembly dropping the wire to ground and to boot the wire cutting method didn't even work
@caiwilliams1441
4 жыл бұрын
Do you have the new agility 50
@caiwilliams1441
4 жыл бұрын
And how do you de restrict it with the cdi I can’t seem to find the small black box and I have the 2018 kymco agility
@caiwilliams1441
4 жыл бұрын
john papajohn f
what size and weight are the rollers, i have the exact same bike, even down to the colour are they 15x12,or 16x13? or 18x15?
@jyriniskanen5724
6 жыл бұрын
Colin Shard 16×13
What does the rollers weight?
@JKV.
4 жыл бұрын
7g
Hi nice video however never put lock tight on crankshaft!
Did you do anything with the cdi?
@banaanqwerty4242
4 жыл бұрын
Have you even watched his channel
how mutch grams is it
@robbet7963
3 жыл бұрын
Got the same question
What size were those new Rollers?
@JKV.
4 жыл бұрын
7.0g
I barley got to 1:07 didn't realize i was on a radio channel shit I was looking for info
whats the reference of the rollers ?
@colinshard8665
6 жыл бұрын
checkout this link:www.virijavara.fi/kauppa/data/Variaattorirulla_koot.pdf this gives you the standard fitted size and weight of the rollers for your type of bike, the agility 50cc 4-stroke is fitted standard with 16x13 6,5 gram rollers
does this also work on a kymco agillity 50 16+
@faabberg
4 жыл бұрын
6.3 grams
@addeade231
4 жыл бұрын
What about Kymco II Like 50i (the new kymco like)????
Is the boss 37 mm or 38 mm?
@daand12
9 жыл бұрын
Claudio Rebeiro 38mm
@claudiorebeiro3632
9 жыл бұрын
daand12 Thanks
Why is the impact gun so important? I'm sure it can be done without it
@banaanqwerty4242
4 жыл бұрын
Bcs if u do it wrong without you will easily break the moped
@leejones3061
4 жыл бұрын
I'm trying to do it this min with. A socket got no chance
V/10 A/.007 Hit mute at the beginning of this or .... trust me just hit mute and read through it for a happier life ;)
What weight of rollers are you suggesting? I have a Kymco 50cc Super 8 50x... I see that the smooth boss is a 38mm... I just need to know what weight of rollers. Thanks
@elikiley1765
5 жыл бұрын
Michelle Blau it depends what you are trying to achieve m, fast takeoff or faster overall speed. Lighter I better for faster takeoff but for a more reliable and faster speed heavier is better
this is the kind of music scooter people listen to
@dis_fawkn_guy9836
Жыл бұрын
no just this guy
Glad my mute button works...
Good video-----horrible choice of music!
@JazzyLocke
5 жыл бұрын
@Jose Alexander LOL!
Wtf is going on with his music...I cannot make it through the video!!!
Where in the H did you get the horrible background noise. PLEEAASSE eliminate it.
My God this music is absolutely fuckin awful. I hope the video is informative.
They gay night club music….
This is the most annoying music to listen to