Video showing correct fitment of KYB shock absorbers to the front of Toyota Yaris II (11.05-)
Жүктеу.....
Пікірлер: 23
@filpip67624 жыл бұрын
grinningphd 4 months ago Great video, was very helpful, thanks!
@sourcefollower5 жыл бұрын
Great video, was very helpful, thanks!
@femalegarage8 жыл бұрын
Great video, nicely done.
@tonyd1z38 жыл бұрын
nice video and job. thanks
@Majorhavoktv3 ай бұрын
very nice video!
@alfredobrown8 жыл бұрын
ok, on my way to the garage to do this. wish me luck.
@tardeliesmagic
5 жыл бұрын
This way is quicker,easier and hastle free... it's a hack...kzread.info/dash/bejne/ZmuG0KmbXdenm6Q.html
@krisursule62303 жыл бұрын
Its the best of videos. Look at this moment 5:30. It's the same part that the original Toyota.
@fjrodz99583 жыл бұрын
Where can I get the tool to remove the top end of the shock? Thanks
@xanavy3846 жыл бұрын
Where can i get the tools for the top of shockbreaker remove?
@oswaldowever12632 жыл бұрын
Nada de arriba hay q desarmar,,,, una llave offset de 17mm y una llave L sueltan el amortiguador
@fazalelahi14 жыл бұрын
shock absorber for 1000cc variant the same or there is difference 1.0 cc and 1.3 cc? if there is difference then what is the part number for 1.3 cc.
@lionelsoto23272 жыл бұрын
Excellent,, which is name strut mount remove. ( allen) ??
@anru2774 Жыл бұрын
Great video, used it to change mine out. I have a question, I did the same exact thing you did but for some reason when I lowered the car, they pushed up and theres a gap under the top nuts on both sides that hold the shocks on top. When I raise the car again and move the tire up and down the entire shock moves up and down because of the gap. I brought this Yaris 08 they had the gap so I brought the new mounts and bearings but still have the gap,Do you thing someone installed the wrong shocks absorbers?
@josedanielpg2329
Жыл бұрын
I have the same question, but in a Yaris 2013.
@anru2774
Жыл бұрын
@@josedanielpg2329 I ended up buying different Strut Mount. The round plate that holds the spring in. My car strut mounts only had the nut in the middle to hold sping. I changed them for the strut mounts that have the 3 bolts facing up and fit in the 3 holes that are on the car. So to remove them in the future, instead of removing the big nut, I remove the 3 smaller nuts.
@auxmike7 жыл бұрын
You can get the top nut off without removing all those parts like he did. But it is t easy!
@kalvenjamieson704 жыл бұрын
Toyota sanctioned weight reduction tutorial
@zloben90005 жыл бұрын
OMFG you DONT need to remove anything... use a box end wrench... removing wipers ?
@joshstrassburg5545
3 жыл бұрын
Exactly, too much work on the wipers not needed
@velr50gt5 жыл бұрын
It’s ridiculous all you have to remove to “gain” access to the strut nuts.
@joshstrassburg5545
3 жыл бұрын
You don’t Pass thru socket set will do it, harbor freight 20$ The wipers do not need to come off
Пікірлер: 23
grinningphd 4 months ago Great video, was very helpful, thanks!
Great video, was very helpful, thanks!
Great video, nicely done.
nice video and job. thanks
very nice video!
ok, on my way to the garage to do this. wish me luck.
@tardeliesmagic
5 жыл бұрын
This way is quicker,easier and hastle free... it's a hack...kzread.info/dash/bejne/ZmuG0KmbXdenm6Q.html
Its the best of videos. Look at this moment 5:30. It's the same part that the original Toyota.
Where can I get the tool to remove the top end of the shock? Thanks
Where can i get the tools for the top of shockbreaker remove?
Nada de arriba hay q desarmar,,,, una llave offset de 17mm y una llave L sueltan el amortiguador
shock absorber for 1000cc variant the same or there is difference 1.0 cc and 1.3 cc? if there is difference then what is the part number for 1.3 cc.
Excellent,, which is name strut mount remove. ( allen) ??
Great video, used it to change mine out. I have a question, I did the same exact thing you did but for some reason when I lowered the car, they pushed up and theres a gap under the top nuts on both sides that hold the shocks on top. When I raise the car again and move the tire up and down the entire shock moves up and down because of the gap. I brought this Yaris 08 they had the gap so I brought the new mounts and bearings but still have the gap,Do you thing someone installed the wrong shocks absorbers?
@josedanielpg2329
Жыл бұрын
I have the same question, but in a Yaris 2013.
@anru2774
Жыл бұрын
@@josedanielpg2329 I ended up buying different Strut Mount. The round plate that holds the spring in. My car strut mounts only had the nut in the middle to hold sping. I changed them for the strut mounts that have the 3 bolts facing up and fit in the 3 holes that are on the car. So to remove them in the future, instead of removing the big nut, I remove the 3 smaller nuts.
You can get the top nut off without removing all those parts like he did. But it is t easy!
Toyota sanctioned weight reduction tutorial
OMFG you DONT need to remove anything... use a box end wrench... removing wipers ?
@joshstrassburg5545
3 жыл бұрын
Exactly, too much work on the wipers not needed
It’s ridiculous all you have to remove to “gain” access to the strut nuts.
@joshstrassburg5545
3 жыл бұрын
You don’t Pass thru socket set will do it, harbor freight 20$ The wipers do not need to come off
nice video and job. thanks