Kubota RTV900 Head Gasket Issues!!!
Автокөліктер мен көлік құралдары
Farmer Brown brought this Kubota RTV900 over for a bit of love... turns out it needed a bit more than he originally thought but we get her all tuned up! hope ya's enjoy the video and we also have the website up and running for our stickers and soon some other merch too! I'll attach a link to the website and feel free to check it out! cheers 🍻 www.rednecks-dirtyhands.com/
Пікірлер: 85
Hmmmm! Your right on the gamble fir sure. I'm sure it will be good for awhile but not sure about long term. Glad I didn't see any Bud Light lol! Another good one Pete! Glad it was you and not me on this one!!
"Dirty little bug you!" 😂
Great video. Stickers ordered...Cheers!!!
Love it that thing’s running on par
Any content by you is great content! Keep on keeping on, Pete!
@rednecksdirtyhands
Жыл бұрын
haha thank you! cheers 🍻
VERY interesting Pete. I really enjoyed seeing the Kubota repair.
@rednecksdirtyhands
Жыл бұрын
thank you! 🍻
Great video! Love the repair videos
@rednecksdirtyhands
Жыл бұрын
thanks! 🍻
Cheers 🍻 🥂 🍻 Pete. Great video 📹 once again 👏
@rednecksdirtyhands
Жыл бұрын
thank you! 🍻
Love the expanded content Pete, nice one 🍻👍😎
@rednecksdirtyhands
Жыл бұрын
thank you! 🍻
Just another informative video from you , that head will be just fine , I used to resurface heads when General Motors Truck Centre had a machine , then one day a guy from the 6.5 assembly plant from Ohio saw me doing that and said I could not do that because it would alter the compression - pulleez gimme another line , , so I started putting a thin film of Teflon Pipe Sealant on the known weak areas and put-em back together , never had a problem . Duramax engines where a piece of cake , just picked the thickess gasket of the three . Missed seeing your road test partner . she's a nice one for sure !!
@rednecksdirtyhands
Жыл бұрын
thank you! cheers 🍻
Haha hope your filming the sawmill install great video Pete ! stickers look great
@rednecksdirtyhands
Жыл бұрын
haha she'd be one long video!! took like a week to put together lmao 🤣 worse than puttin a BBQ from home depot, a bookshelf from ikea and a gazebo from crappy tire together all at once!! one heck of a s#!t show!! but we got it!! 🤣🍻
Great episode Pete. Keep up the great content, RNDH 4 life.👍👍👍
@rednecksdirtyhands
Жыл бұрын
haha thank you! I really appreciate it brother! 🍻
Interesting video. I was curious about those engines, I have a BX with one.
Those little 902s go forever if taken care of. My grasshopper has over 4500 hours of very very few issues
@rednecksdirtyhands
Жыл бұрын
they are great little motors for sure! 🍻
Hey from Minnesota Pete how is a good time watching a good laugh? Good fun keep up the great work bud
@rednecksdirtyhands
Жыл бұрын
thank you! cheers Minnesota 🍻
Nice one Pete… Cheers 🍻
@rednecksdirtyhands
Жыл бұрын
thanks! cheers🍻
Awesome video Pete 😀🍺
@rednecksdirtyhands
Жыл бұрын
thank you! 🍻
Just placed an order for some stickers, definitely need a hat and a t-shirt ✌🏻
@rednecksdirtyhands
Жыл бұрын
that's awesome! thank you! 🍻
A little never sneeze would have prevented that! Should have been a factory design or even a bit smaller shoulder bolt with an o ring seal to seal her up. Shitty the cover broke I feel your pain Pete!
Nice One!!!
Nice one on saving the money on the head. The stealer ship would have charged thousands!
Nice job! Interested in seeing the saw mill when it’s done
@rednecksdirtyhands
Жыл бұрын
haha yeah we might have to "post" a video of it in action! 🤣🍻
@slickmuck4312
Жыл бұрын
@@rednecksdirtyhands absolutely wanna see it in action
Feller on here put a Kubota diesel in Saturn, and was getting over 60 mpg
Also on the Kubota it was arching spark right near the fuel leak.
Yeah Pete I may get one of those sticker she dangles for my Polaris I know now much you love Polaris Ha Ha !!! Just kidding around with you . Great job fixing the kubota by the way .
@rednecksdirtyhands
Жыл бұрын
haha I'd be proud to see it on your polaris! cheers 🍻 and thank you!
GET THIS MAN TO 20K SUBS...LET'S GO!!!
@rednecksdirtyhands
Жыл бұрын
love the support brother! 🍻
Hope You are not near the wildfires, We are getting the smoke all the way down here in Southwestern Connecticut, hangs in the air today like a fog ,
@rednecksdirtyhands
Жыл бұрын
yeah no fires near us but the smoke is all around! crazy
I have a 2004 with a serial number in the mid 20,000 range that has is closing in on 3,200 hours. One clue to its age is the front drive shaft. Is it one piece or does it have a universal in the middle of it. Mine had the universal. It failed and I learned Kubota had a kit to modify the drive to a one piece front drive shaft. I installed that and have had no problems with the drive shaft since.
Great video
@rednecksdirtyhands
Жыл бұрын
thank you! 🍻
Great content
@rednecksdirtyhands
Жыл бұрын
thank you! 🍻
Link for the website? Possibly one too many cold snacks but I couldn't find it 😅
That bad boy needs a turbo installed
👍
? What is the torq on the head bolts
Maybe i missed it but was that cooling fan running?
Another great video Pete,keep them coming! I couldn’t find your merchandise website?
@markv151
Жыл бұрын
I think you might mean Pete not Mike ;-)
@richhowes-xr5ix
Жыл бұрын
@@markv151 my apologies I was drinking a Mikes Hard Lemonade while writing my comment. Me thinks my drink interpolated with my comment!
@markv151
Жыл бұрын
@@richhowes-xr5ix All good brother..cheers !
Need shipping to the US
Did you put a new oring on the head allignment pin before you set the head in place?
@rednecksdirtyhands
10 ай бұрын
yeah the new head gasket already had the o-ring built into it 🍻
Just smoked a fatty and now some RNDH..... Nice one 👍
@rednecksdirtyhands
Жыл бұрын
haha good times "Rollin" through the videos!! 🤪🤣🍻
Watching ya from new york...through a thick haze of your Canadian smoke....aaaarrrgggghh.....🤕when you ol boys put the fire out....???....eh?... I know it's not your fault......but how much woods you got left??
No machine shops close by to get that head milled, Pete?
@rednecksdirtyhands
Жыл бұрын
none real close to me..but I've actually ordered a new head and valves for it just in case lol 🤣🍻 it really only takes about an hour or so to swap the head on it so I figured just throw a gasket in it for now and see what happens and if there's an issue I'll put the new head on it when it shows up 🍻
Do you have to put a tdc? When adjusting valves
@rednecksdirtyhands
8 ай бұрын
you don't necessarily have to...I just make sure the valves are closed and nowhere near the point of being pushed open...always worked for me. then set them and roll it over and re check just to make sure..did it like that on this kubota and she runs Tickidy Boo! 🤣🍻
@Tacoma1989
8 ай бұрын
😂thanks
What did you torque the head bolts too?
@rednecksdirtyhands
3 ай бұрын
I honestly can't remember lol 🤔
I would of liked to of seen the radiator get washed out.. Most of the time these things get warped heads and blown gasket its because the radiator got clogged up with mud and weed seeds ect and it runs hot and you get suprise suprise!
@rednecksdirtyhands
Жыл бұрын
yeah you're not wrong there! good tip and I will make sure the rad is free and clear 🍻
I can't believe those bolts broke without any weasel piss
I really like how my mini ho moves also😅
@rednecksdirtyhands
Жыл бұрын
🤣🍻
Radiators are always a fault on these 3 cyl Kubota lumps....
@rednecksdirtyhands
9 ай бұрын
yeah gotta make sure ya wash them out all the time too...the fins get all plugged up with dirt and they over heat easier...🍻
Does beer come with an order lol
@rednecksdirtyhands
Жыл бұрын
lmao 🤣 oh belive me....I thought about it!! 🍻
Most of the problems with those diesel atv's is people drive them like they are gas motors. If you can't drive em like an old feller, buy a gas rig. Can easily get 4 to 5 thousand hours on those motors with regular maintance. Looks like that motor was either a bad motor form the start or driven like it was stolen.
@prevost8686
Жыл бұрын
Most get run hot because the owner lets the radiator fins clog up with dust,mud, weeds.
like a lot of vids, fun 2 watch ..., but some of us are looking 4 answers, so instead of uh.. well ..i don't know , CALL THE DEALER!!!, ( no, not ur drug dealer bubba ) slowly and carefully give him the serial / product/ group / i.d./ phone, hell bubba give him ur s.s. number, he'll tell u what year it is !! wow !!! wtf!!