Kubota BX-24 Removing Loader, and Installing Snowblower
Getting ready for winter. I remove the loader, and install the snowblower on my Kubota BX-24 tractor.
Жүктеу.....
Пікірлер: 52
@tomdoty8334 Жыл бұрын
I have a 2016 BX25 DLB. I recently bought a used BX 2750 blower. I think it's a 2002, that's in terrific shape. Anyway, your video is a tremendous help for me. I've never had, or used one, so I wasn't sure about the mounting process, but your video was so well done, I walked right through it. Thanks for a great job.
@dogbyte555
Жыл бұрын
Great news. I am glad the video helped.
@kidddX8811 жыл бұрын
just setting my new BX18 up for snow,. Very helpful Thanks! next year I wont wait til it 18 degrees out.
@smeefamily542 жыл бұрын
Thanks for the info. I will be doing this on my new BX23S this Monday when it arrives.
@Americancitizen111 жыл бұрын
This was an AWESOME video! I was wondering how this setup worked..... Thanks!!
@hunt4fish5 жыл бұрын
Great how to. I have the same set up and haven't had it on the tractor yet figured too much work, now looks easy thanks!
@Theshow118 жыл бұрын
This will be very helpful this winter, Thank You
@jimi-suelawrence35706 жыл бұрын
Thank you so much, ready for the snow. Also the cart Idea is the way to go ! Thank you thank you, I had dreading this task and now it is done.
@dogbyte555
6 жыл бұрын
Great. I'm glad you got it handled. Thanks for watching.
@bombidude4 жыл бұрын
I like the newer 80 series quick hitch and snowblower setup
@rhdk910 жыл бұрын
Nice video, just got a new 2370 this spring and considering a snow blower Thanks for posting
@dogbyte555
10 жыл бұрын
Thanks, I'm glad you liked it.
@OnePotMeals10 жыл бұрын
Thanks again. Very informative
@dogbyte55511 жыл бұрын
I'm glad you got something out of it. Thanks.
@Gr8Layks7 жыл бұрын
Good videos. Thanks for taking time to make/upload them.
@dogbyte555
7 жыл бұрын
Your welcome. Thanks for watching them.
@DelawareDevil2 жыл бұрын
I see this video is quite aged, but for new people with the old style hitch (yours) Get a piece or 1/2 inch OD pipe and run it inside the lower shaft, then attach the mount to the loader lever and use a !/@ inch reversible drill to control discharge direction. Also hook the blower to the quick hitch before putting the shaft in that goes to the mid PTO. Sometimes I found it easier to separate the pto to the blower and attach the rear one first, rest the other half on the lip and just slide it together and lock it, then hook up the mid mount shaft. I like being able to spin the shaft easily.
@obsidianduck3601
Жыл бұрын
Do you know the name or size of the t-bolts that secure those aluminum wedges?
@dogbyte55511 жыл бұрын
Thank you very much.
@dogbyte55511 жыл бұрын
I have never owned a John Deere, but I think they are good machines. You would need a larger machine for baling hay. Sorry, but I don't know enough to answer your question.
@rec03555 ай бұрын
The only thing I wish they would do is to Reverse the way you attach the shaft from the Snowblower to the Lift Mount,I have problems getting my hands in to slide the collar back to attach the shaft ,if it were reversed you could remove the cover at the Snow Blower and slide the collar. Also to dogbyte555 my Chute holder was attached to the Loader control handle ,it's a bit awkward but it does work
@dogbyte555
5 ай бұрын
I agree. It's a real pain.
@dogbyte55511 жыл бұрын
Thanks
@dogbyte55510 жыл бұрын
Cool, I don't think I'd like turning around to drive backwards though.
@09ironman13 жыл бұрын
Nice video
@johntomko70319 жыл бұрын
You need to turn the dolly around, check out the instruction videos for the Bxanded Loader Dolly instructions. Thanks.
@dogbyte555
9 жыл бұрын
You're the second person to mention this. I'll have to check it out. Thanks.
@Denkha9411 жыл бұрын
thank you though.
@FrostyTheBeerMan7 жыл бұрын
Great video, really enjoyed watching that whole process. I'm curious to know if you ever bought the hydraulic add-on to control the neck / nozzle of the snowblower, I haven't seen a video with that yet. Thanks for posting this, it was great to watch !
@dogbyte555
7 жыл бұрын
I actually tried to order it last week, but was told they are no longer available.
@manuelralha3362
6 жыл бұрын
FrostyTheBeerMan Riphfzdvnlb n zvklmvserykmv 0łß 5qm2wespjf9
@Denkha9411 жыл бұрын
Hi their I have a question. which tractor is easier to service and to work on. John Deer or Kubota? Also which one for commercial use like bailing hay. thanks
@jimobray365910 жыл бұрын
Thanks for sharing this; i've been considering the 2750 for some time now. Do you use your BX24 with any rear weights during the winter season? I've got turf tires but my driveway is flat and i dont think traction will be a problem here. Any thoughts?
@dogbyte555
10 жыл бұрын
I have industrial tires, and do not have any problems. My driveway is also flat. I use 4 wheel drive too. With the blower, you are not pushing any snow so I don't think you will have any problems.
@bobnh053 жыл бұрын
Where did you buy the dolly?
@cjorde673 Жыл бұрын
Tough to see what he is doing when he is working on the opposite side of the tractor.
@dogbyte55511 жыл бұрын
I would think it would go through several feet of snow if you go slow enough.
@legotyler299 жыл бұрын
if you have down fore on the loaders pins slide right out
@benmase
6 жыл бұрын
Exactly! Mine slide right out with downward pressure on the bucket.
@rostrander734 жыл бұрын
Idle down before turning off
@robertszostak19539 жыл бұрын
Did you realize you are using your dolly backwards? The prop stand wedges into the 'V' notch where the cross member spans the width of the dolly between the two upside down welded L brackets.
@dogbyte555
9 жыл бұрын
I did not realize that. I'll have to take a look at that.
@sahmadi10007 жыл бұрын
I contrast to what Kubota advertises there is nothing versatile about this tractor. You would think a quick attach and easy changing of the front elements would be standard. I was looking at a BX25, and I noticed to run a grapple bucket so that I could load and move some brushes, it would be a $2000 modification. An old Ford 8 N also takes a tiller, a mower and all kinds of implements to pull. Thanks for sharing your knowledge.
@dogbyte555
7 жыл бұрын
Thanks for watching
@Northeast_Mainiac10 жыл бұрын
Where did you get that dolly for holding the loader?
Пікірлер: 52
I have a 2016 BX25 DLB. I recently bought a used BX 2750 blower. I think it's a 2002, that's in terrific shape. Anyway, your video is a tremendous help for me. I've never had, or used one, so I wasn't sure about the mounting process, but your video was so well done, I walked right through it. Thanks for a great job.
@dogbyte555
Жыл бұрын
Great news. I am glad the video helped.
just setting my new BX18 up for snow,. Very helpful Thanks! next year I wont wait til it 18 degrees out.
Thanks for the info. I will be doing this on my new BX23S this Monday when it arrives.
This was an AWESOME video! I was wondering how this setup worked..... Thanks!!
Great how to. I have the same set up and haven't had it on the tractor yet figured too much work, now looks easy thanks!
This will be very helpful this winter, Thank You
Thank you so much, ready for the snow. Also the cart Idea is the way to go ! Thank you thank you, I had dreading this task and now it is done.
@dogbyte555
6 жыл бұрын
Great. I'm glad you got it handled. Thanks for watching.
I like the newer 80 series quick hitch and snowblower setup
Nice video, just got a new 2370 this spring and considering a snow blower Thanks for posting
@dogbyte555
10 жыл бұрын
Thanks, I'm glad you liked it.
Thanks again. Very informative
I'm glad you got something out of it. Thanks.
Good videos. Thanks for taking time to make/upload them.
@dogbyte555
7 жыл бұрын
Your welcome. Thanks for watching them.
I see this video is quite aged, but for new people with the old style hitch (yours) Get a piece or 1/2 inch OD pipe and run it inside the lower shaft, then attach the mount to the loader lever and use a !/@ inch reversible drill to control discharge direction. Also hook the blower to the quick hitch before putting the shaft in that goes to the mid PTO. Sometimes I found it easier to separate the pto to the blower and attach the rear one first, rest the other half on the lip and just slide it together and lock it, then hook up the mid mount shaft. I like being able to spin the shaft easily.
@obsidianduck3601
Жыл бұрын
Do you know the name or size of the t-bolts that secure those aluminum wedges?
Thank you very much.
I have never owned a John Deere, but I think they are good machines. You would need a larger machine for baling hay. Sorry, but I don't know enough to answer your question.
The only thing I wish they would do is to Reverse the way you attach the shaft from the Snowblower to the Lift Mount,I have problems getting my hands in to slide the collar back to attach the shaft ,if it were reversed you could remove the cover at the Snow Blower and slide the collar. Also to dogbyte555 my Chute holder was attached to the Loader control handle ,it's a bit awkward but it does work
@dogbyte555
5 ай бұрын
I agree. It's a real pain.
Thanks
Cool, I don't think I'd like turning around to drive backwards though.
Nice video
You need to turn the dolly around, check out the instruction videos for the Bxanded Loader Dolly instructions. Thanks.
@dogbyte555
9 жыл бұрын
You're the second person to mention this. I'll have to check it out. Thanks.
thank you though.
Great video, really enjoyed watching that whole process. I'm curious to know if you ever bought the hydraulic add-on to control the neck / nozzle of the snowblower, I haven't seen a video with that yet. Thanks for posting this, it was great to watch !
@dogbyte555
7 жыл бұрын
I actually tried to order it last week, but was told they are no longer available.
@manuelralha3362
6 жыл бұрын
FrostyTheBeerMan Riphfzdvnlb n zvklmvserykmv 0łß 5qm2wespjf9
Hi their I have a question. which tractor is easier to service and to work on. John Deer or Kubota? Also which one for commercial use like bailing hay. thanks
Thanks for sharing this; i've been considering the 2750 for some time now. Do you use your BX24 with any rear weights during the winter season? I've got turf tires but my driveway is flat and i dont think traction will be a problem here. Any thoughts?
@dogbyte555
10 жыл бұрын
I have industrial tires, and do not have any problems. My driveway is also flat. I use 4 wheel drive too. With the blower, you are not pushing any snow so I don't think you will have any problems.
Where did you buy the dolly?
Tough to see what he is doing when he is working on the opposite side of the tractor.
I would think it would go through several feet of snow if you go slow enough.
if you have down fore on the loaders pins slide right out
@benmase
6 жыл бұрын
Exactly! Mine slide right out with downward pressure on the bucket.
Idle down before turning off
Did you realize you are using your dolly backwards? The prop stand wedges into the 'V' notch where the cross member spans the width of the dolly between the two upside down welded L brackets.
@dogbyte555
9 жыл бұрын
I did not realize that. I'll have to take a look at that.
I contrast to what Kubota advertises there is nothing versatile about this tractor. You would think a quick attach and easy changing of the front elements would be standard. I was looking at a BX25, and I noticed to run a grapple bucket so that I could load and move some brushes, it would be a $2000 modification. An old Ford 8 N also takes a tiller, a mower and all kinds of implements to pull. Thanks for sharing your knowledge.
@dogbyte555
7 жыл бұрын
Thanks for watching
Where did you get that dolly for holding the loader?
@dogbyte555
10 жыл бұрын
bxpanded.com/index.php?l=product_detail&p=8
@Northeast_Mainiac
9 жыл бұрын
Thank-you
What was the price on the tractor
@dogbyte555
7 жыл бұрын
I'm not sure. I bought it used as a package deal.
Where did you get the dolly?
@dogbyte555
4 жыл бұрын
www.bxpanded.com/BX-FEL-dolly
@timothyheim9507
4 жыл бұрын
Thank you