Change of cylinder and piston after damage. . . . for more interesting videos click ,, HERE " / @paulxchannel
Жүктеу.....
Пікірлер: 42
@grantfuller20164 жыл бұрын
That’s why they always teach you to put the clip gaps to the top or the bottom - never sideways. ( that said , never seen one fail like that )
@evaork37463 жыл бұрын
Nice rebuild man👍👍👍
@2strokemxclassics3 жыл бұрын
Good vid m8 I'm doing one of these tommorow that's seized👍
@jackstrempel51354 жыл бұрын
when u hit the rist pin out put your hand on the back of the pistion when u dont it putting pressure on the crankshaft and rod
@chrisstephens6673
4 жыл бұрын
@NickoLps a little ungenerous aren't we?
@phillsmith5100
3 жыл бұрын
He’s right though. And for keyboard warrior you seemed the more violent, but hey that’s just my opinion 🤷🏼
@jackstrempel5135
3 жыл бұрын
Who me
@phillsmith5100
3 жыл бұрын
jack strempel I was on about Nickolps. I was agreeing with u.
@brane1872
3 жыл бұрын
Oh no, putting pressure on parts that are made to be molested at 10000+rpm
@JMATUS243 жыл бұрын
How did that vertex piston hold up for you. Thinking about getting that exact one. Great video, thanks.
@saleemhamemun7362
3 жыл бұрын
Vertex is actualy KTM OEM piston
@garygruber1452 Жыл бұрын
It appears as if you didn't lube the piston before assembly. Is there a reason for that?
@cardwellbrosdirtbikediy12493 жыл бұрын
Did he torque anything down?
@vanluomvlogs4 жыл бұрын
Bạn làm máy Nhìn đẹp ok
@martynotete Жыл бұрын
You made some mistakes. The gaskets under the cylinder are measured with a special tool, that's the first thing. Secondly, when tightening the power valve you MUST hold it with a 6mm spanner, otherwise it cracks... At the beginning it doesn't show, but after 15-20 moto hours it cracks in half. But all in all a good job :)
@benji94584 жыл бұрын
How many hours did this piston drive
@PaulXchannel
4 жыл бұрын
20hours. Trainings + race.
@lancien87513 жыл бұрын
Price of lot ? I speak french excuse mi for the error
@michaelwarlow43983 жыл бұрын
Slow ! But nice and rough 😜
@arturomedina57462 жыл бұрын
What year ktm 65?
@evaork37463 жыл бұрын
This is a cilinder that dont need a powervalve... but ktm wants to... becouse it looks good😂😂
@charliesparks77894 жыл бұрын
Was new cylinder needed? Couldn’t you have bored out the cylinder and got a larger piston?
@PaulXchannel
4 жыл бұрын
Very damaged. 0.5 MM groove on cylinder.
@glennmerriman8382
4 жыл бұрын
Cylinder is plated aluminium, no iron liner, so cannot be bored out as such. Though it can be repaired & re plated
@motogpmotogp7281
Ай бұрын
Squish plz? @@PaulXchannel
@mwmxcnc4 жыл бұрын
What the heck happened to the head? Looks like someone took a pipe wrench to it. How did the cylinder works cylinder hold up? I’ve never tried one.
@PaulXchannel
4 жыл бұрын
Retaining ring - dropped out.
@Hi-sp2nw3 жыл бұрын
What mm was the piston
@PaulXchannel
3 жыл бұрын
Everything is in the video. 44.96
@Hi-sp2nw
3 жыл бұрын
Paul X thank you
@jcook10772 жыл бұрын
You need to invest in a torgue wrench
@jdel15384 жыл бұрын
1:06 what is this you are taking off?
@dariusmickunas
3 жыл бұрын
Looks like diaphragm of power valve actuator
@user-de1cf6wr6v4 жыл бұрын
Знатно уработан горшок с поршем
@joelwrx04073 жыл бұрын
Ummm, Do you own a torque wrench?
@PaulXchannel
3 жыл бұрын
I've heard about this device before :)
@boru-cnc4 жыл бұрын
That's not your working style! Normally you should turn the piston to smaller diameter and then put a new little aluminium bush into the cylinder! 😂 That's the way you fix 99% parts! 😂
@PaulXchannel
4 жыл бұрын
I'm glad he's still visiting my channel. Thanks.
@boru-cnc
4 жыл бұрын
@@PaulXchannel no problem I love to comment your chanel, youre a good machinist but some things can be improved ! ;)
Пікірлер: 42
That’s why they always teach you to put the clip gaps to the top or the bottom - never sideways. ( that said , never seen one fail like that )
Nice rebuild man👍👍👍
Good vid m8 I'm doing one of these tommorow that's seized👍
when u hit the rist pin out put your hand on the back of the pistion when u dont it putting pressure on the crankshaft and rod
@chrisstephens6673
4 жыл бұрын
@NickoLps a little ungenerous aren't we?
@phillsmith5100
3 жыл бұрын
He’s right though. And for keyboard warrior you seemed the more violent, but hey that’s just my opinion 🤷🏼
@jackstrempel5135
3 жыл бұрын
Who me
@phillsmith5100
3 жыл бұрын
jack strempel I was on about Nickolps. I was agreeing with u.
@brane1872
3 жыл бұрын
Oh no, putting pressure on parts that are made to be molested at 10000+rpm
How did that vertex piston hold up for you. Thinking about getting that exact one. Great video, thanks.
@saleemhamemun7362
3 жыл бұрын
Vertex is actualy KTM OEM piston
It appears as if you didn't lube the piston before assembly. Is there a reason for that?
Did he torque anything down?
Bạn làm máy Nhìn đẹp ok
You made some mistakes. The gaskets under the cylinder are measured with a special tool, that's the first thing. Secondly, when tightening the power valve you MUST hold it with a 6mm spanner, otherwise it cracks... At the beginning it doesn't show, but after 15-20 moto hours it cracks in half. But all in all a good job :)
How many hours did this piston drive
@PaulXchannel
4 жыл бұрын
20hours. Trainings + race.
Price of lot ? I speak french excuse mi for the error
Slow ! But nice and rough 😜
What year ktm 65?
This is a cilinder that dont need a powervalve... but ktm wants to... becouse it looks good😂😂
Was new cylinder needed? Couldn’t you have bored out the cylinder and got a larger piston?
@PaulXchannel
4 жыл бұрын
Very damaged. 0.5 MM groove on cylinder.
@glennmerriman8382
4 жыл бұрын
Cylinder is plated aluminium, no iron liner, so cannot be bored out as such. Though it can be repaired & re plated
@motogpmotogp7281
Ай бұрын
Squish plz? @@PaulXchannel
What the heck happened to the head? Looks like someone took a pipe wrench to it. How did the cylinder works cylinder hold up? I’ve never tried one.
@PaulXchannel
4 жыл бұрын
Retaining ring - dropped out.
What mm was the piston
@PaulXchannel
3 жыл бұрын
Everything is in the video. 44.96
@Hi-sp2nw
3 жыл бұрын
Paul X thank you
You need to invest in a torgue wrench
1:06 what is this you are taking off?
@dariusmickunas
3 жыл бұрын
Looks like diaphragm of power valve actuator
Знатно уработан горшок с поршем
Ummm, Do you own a torque wrench?
@PaulXchannel
3 жыл бұрын
I've heard about this device before :)
That's not your working style! Normally you should turn the piston to smaller diameter and then put a new little aluminium bush into the cylinder! 😂 That's the way you fix 99% parts! 😂
@PaulXchannel
4 жыл бұрын
I'm glad he's still visiting my channel. Thanks.
@boru-cnc
4 жыл бұрын
@@PaulXchannel no problem I love to comment your chanel, youre a good machinist but some things can be improved ! ;)