Great video, thx There is a 2014 690 Enduro for sale near me, that has the same set up as you. All my questions were answered here. I have a works Yz250 that smokes all my buddy's 450's, I do a lot of road riding and at 57 its getting to be too insane for me, so the 690 looks like the best of both worlds. Thx again.

Thats literally two bike in one, i think it got me sold on one.

I have a husqvarna 701 2019 I put some orgian sm wheels but the abs doesn’t work on the rear wheel you know it can be leave the pampering abs rings of the enduro wheel

I’ve been looking for a new enduro to Supermoto conversion for so long. I wanted to know how it looked

These bikes look so much better in Supermoto mode

hi i found your video while thinking the same think as you. how was after changing the wheel. do you have any video.?

Where did you buy these amazing wheel kit?

Looks fantastic. I want to do the same with my 701 enduro. Where did you order the wheel set and what size hubs are used?

@KTM_690_ENDURO

2 жыл бұрын

Wheel specification in the description.

Great video. Thank you for sharing. Did you order your rims tubeless?

@KTM_690_ENDURO

11 ай бұрын

That wasn't an option when I placed the original order. Now, Warp9 ships the wheels tubeless.

did you have any problem with the engine error light staying on, I have just fitted a set of 17s with haan hubs to my 2022, my engine error light stayed on after i fitted the wheels, im thinking it may be something to do with the abs. i noticed your rims had the abs rings on them out of the box, after a little research i think i might need different abs rings.

Great video! I bought the smc r but i kinda think that a should’ve got the enduro and put supermoto wheels on. You get best of both worlds. And i like the soft suspension better anyway 😀

@constantinosschinas4503

2 күн бұрын

SM has way better brakes tho.

Nice! Did you move the forks in the clamps to compemsate for the smaller wheel lowering the frond end? How does it track?

@KTM_690_ENDURO

Жыл бұрын

No. Stock setup. Bike tracks perfect.

How well did those Warp9 wheels hold up?

Thanks for this video. Will be doing the same to mine soon

How long did it take to do the whole thing ?

Did you use 120 on front?

Hello, what about the abs settings ? Always on map 2? And the Speedo meter settings ? Did you adapt the wheel circomference settings?

@KTM_690_ENDURO

Жыл бұрын

ABS works fine - when purchasing you identify ABS and they send the disks. No, both maps work as factory intended. I figure the speedometer is about 2-3 mph off. I ordered my sprocket to approximate stock, according to gearingcommander.com

Hello, please tell me did you use some adapters or additional parts for front/rear brake caliper? Thanks advance

@KTM_690_ENDURO

11 ай бұрын

No - the wheelset was plug and play.

I wonder if the rake angle is the same b/n SMR and the converted Enduro. I'm concerned that the geometry is changed + the softer suspension. This bike IMO won't behave and turn like real SMR. And you will likely overheat the front brake if you get a bit aggressive on a twisty road. Not sure if your intent is to be like real SMR. But for daily commuter or not aggressive riding I think this conversion is awesome!

@KTM_690_ENDURO

Жыл бұрын

No question the rake angle changes due to the 17" front tire. I've never ridden the SMC so I can't compare the two.

@bgsinnerson

Жыл бұрын

@@KTM_690_ENDURO It should turn better I guess :)

Awesome vid, where did you get the lift from? thanks

@KTM_690_ENDURO

Жыл бұрын

Amazon. I do not recommend it.

is that all? no mapping

Thought you needed a smaller chain for a 42T sprocket. No problem using the same chain?

@KTM_690_ENDURO

Жыл бұрын

No. I used the same chain.

Buongiorno quanto ha speso per il kit motard

What size is the front Tyre, Did you cut out a section of the fork protector to accommodate tyre between the forks

@KTM_690_ENDURO

11 ай бұрын

Yes, I had to cut the fork cover. It shows the end result in the video.

I did the same but have a F1 a85 failure on the dash.So still want to kwow witch abs rings you are using? Original ones?

@KTM_690_ENDURO

Жыл бұрын

No. When ordering on warp9's website, there is a box you check notifying them you have ABS. They send the correct rings on the rims and the ABS functions plug and play.

I’ve been considering supermoto wheels for my 690 but I wonder if the front end feels pitched forward after the switch from the 21 to the 17? I bought my bike with the hopes of hitting the trails but I find myself using it to commute to work and quick trips to the shops more often than I get to go off-road. It’s a great city bike the way it is but I can’t help but wonder if it would be better in a more street trim. Thought about trading it in for the SM but having a set of wheels to swap would be nice.

@KTM_690_ENDURO

Жыл бұрын

Did it pitch the bike forward, absolutely. And all that does is make the bike more nibble. It's planted, confident and super responsive.

@mathias6423

10 ай бұрын

I also have the 690 Enduro -2020 model, so the grey parts on this bike is white on mine. I am thinking of ordering an SM kit like this in the spring 2024, I drive 70% tarmac and 30% offroad right now but I am thinking about riding 100% tarmac with the SM tires instead, they perform so much better because of them being smaller and more slick but also because the bike gets lower to the ground so a kit like this makes a huge difference. The only thing that makes the Supermoto version handle better than the enduro version with SM kit I think is that perhaps the suspension is different on the Enduro version ? I have the suspension set to the stiffest sport settings now on my 690 enduro and it is still kind of soft when pressing the bike to it's limits. I think stiffer springs for the suspension would suit the bike if you were to mod the Enduro 690 with SM tires.

@constantinosschinas4503

2 күн бұрын

​@@mathias6423SM has stiffer suspension, a bit less travel and seriously better brakes. I think engine mappings change too.

any ABS/ TC issues?

Na předním kole si zachoval malý brzdový kotouč ? Dík

@KTM_690_ENDURO

2 жыл бұрын

Přední rotor má stejnou velikost jako pažba, 300 mm

Hola buenas tengo la misma moto donde as comprado las ruedas de supermotard gracias

@KTM_690_ENDURO

Жыл бұрын

Warp9 - Enlace en la descripción.

Cost for wheels?

how many spacers are suppose to come with the front wheel? two right?

@KTM_690_ENDURO

Жыл бұрын

Two.

Hola dónde puedo comprar las llantas para mi KTM 690 2019 supermoto

@KTM_690_ENDURO

Жыл бұрын

warp9

Hi! Did the motorcycle get lower and How long ?

@KTM_690_ENDURO

Жыл бұрын

Yes. The seat height is about 2" lower.

is there enough clearance between the front tire and brake cable? or will cable need to be re-routed to the outside of the fork?

@KTM_690_ENDURO

Жыл бұрын

Clearance is good. No modification necessary.

Did you have to buy a spacer to push the front calliper out? Also did you have to get a different chain?

@KTM_690_ENDURO

11 ай бұрын

No spacers necessary for the caliper. I reused the stock chain.

@TheSpragz

10 ай бұрын

@@KTM_690_ENDURO thanks for the reply mate. I’ve since fitted a set of SM wheels. Just had to use the stock 300mm front disc and enduro axle spacers.

@Insaiyanrider

6 күн бұрын

@@TheSpragzhoes the bike doing as a SM setup ?

@TheSpragz

3 күн бұрын

@@Insaiyanrider it was brilliant. I don’t have it anymore. I’m now on a Tenere700 extreme.

Is ur speedo off? If not how do i adjust it. Got ur twin.

@KTM_690_ENDURO

Жыл бұрын

I wanted the ratio to be the same between the two wheel sets so I entered all the info on gearingcommander.com and bought the sprocket that was most similar. It's a very useful website. I highly recommend.

did you change Mapping / Suspension?

@KTM_690_ENDURO

Жыл бұрын

No remapping. No change in suspension. I think it could be tuned for on road but for my purposes, I prefer the suspension tuning for off road, on road.

did you use the same size front disc.

@KTM_690_ENDURO

11 ай бұрын

Yes.

Donde as comprado las ruedas???

@KTM_690_ENDURO

Жыл бұрын

warp9

how much torque does the axel takes

@KTM_690_ENDURO

Жыл бұрын

My manual indicates: 45 N-m front, 90 N-m back.

Did you change kickstand?

@KTM_690_ENDURO

Жыл бұрын

Yes. I bought the shorter kickstand from Warp9.

what about rear shock ?? my is too low after change wheel. adjust shock in that model is so hard

@KTM_690_ENDURO

11 ай бұрын

No adjustment necessary on my setup.

@nycrider1548

11 ай бұрын

@@KTM_690_ENDURO supermoto should be hard back suspension

Welche Felgen sind das? Hast du einen Link dazu?

@KTM_690_ENDURO

11 ай бұрын

Warp9. Link in the description.

What about the red collars on the fork legs? Does the tire clear those?

@KTM_690_ENDURO

2 жыл бұрын

Yes, it does.

If you buy the super moto 690, and then try to sell it soon after, you will join the ranks of many trying to sell them on CL. A limited audience to sell to it seems. Dealers probably cut deals on the super moto version.------ ------------------------ The SM version "looks so cool" and is "so rad"..................but the appeal seems to fade once the radness wears off.

Hola

Tak się nie montuje przedniego koła i osi😮

ABS work?

@KTM_690_ENDURO

11 ай бұрын

Yes.

i have a model 2017 enduro would these wheel specs fit on my bike aswell? if yes ill order them

@KTM_690_ENDURO

Жыл бұрын

Yes. Go to Warp9's website - they have wheels for 2017 model.

I have to ask. Why why why did u not just get the Supermoto bike!

@normalpeopledoingepicstuff8295

2 жыл бұрын

I am thinking about buying the same bike and two sets of wheel too just so I can enjoy pavement only when I want but the rest of the time, I can have a trail bike!

@22smcrrider96

2 жыл бұрын

@@normalpeopledoingepicstuff8295 idk maybe I just don't see the point 🤷 But y not get the Supermoto and throw some dual sport rubber on? Because when u buy the enduro and put sumo wheels then u need to change the suspension the kickstand etc. But then again it is your bike and not mine so I know my opinion doesn't matter. I guess its more of curiosity idk

@normalpeopledoingepicstuff8295

2 жыл бұрын

So are you saying that the other way around is better? Supermoto with enduro wheels don't need mods?

@22smcrrider96

2 жыл бұрын

@@normalpeopledoingepicstuff8295 lol. No I am saying IMO buy the bike that is mostly dedicated to the type of riding you will be doing. Both bike will handle both styles of riding. So buy what suits you and throw tires on it that suit your riding but then again that's just me! I ride mostly street so I got the sumo and put some 70/30 street/dirt tires on it

@MistaRibzz

Жыл бұрын

@@22smcrrider96 enduro has more travel so if you want both worlds get enduro and buy set of smc wheels. IMHO

Don’t put grease on the treads of the axles it messes up the torque specs and you’ll overtorque

@dangrimes9547

Жыл бұрын

This is false information. Page 79 of the KTM factory manual "Clean and grease the thread of the wheel spindle and nut 2".

Okay. Now your suspension sucks on the street and you have a tiny front brake. You just change the wheels. Thats not a supermoto conversion ;-)