I just come to idea how to steal a bike anytime,you just need friend who is "recording" and you talk about locks so no-one suspects :)

@alonzomartii

6 жыл бұрын

Julie Hobbs Have many have you stole by now? Haha

@carlmilan5920

6 жыл бұрын

Modus operandi

@killerash13

5 жыл бұрын

@James Sempy cosplay?

@annahasanovitch4686

4 жыл бұрын

No because in a busy street like that the owner can still come at any moment, which 2-person group has the guts to look to the owner with a camera and a bolt cutter LOL

@miamelancholia2152

3 жыл бұрын

got the exact same idea hahaha

Thanks for the review, I'm guessing the 18mm one is going to give thieves a helluva problem then especially if its locked up high if this one is so strong on its own.

Two screws on the floor, you could just take both the bike and the parking stand in less than 2 minutes with a makita :P

@przemyslawbarzyk5093

4 жыл бұрын

thought the same...

@jshepard152

3 жыл бұрын

Seriously. With a $5 ratchet wrench you could take the whole thing.

@jaystackz3425

3 жыл бұрын

yeah right like a thief is gonna drag this all the way down the block with the parking stand youll catch up to em by then they wanna be quick an easy in and out just buy more locks itll deter most theives

@nicholasbrassard3512

2 жыл бұрын

@@jaystackz3425 ive heard of thieves taking the whole rack and loading it into a van or a trailer.

@kushpaladin

2 жыл бұрын

@@jaystackz3425 lol they dont steal it on foot they park their truck right next to it and just throw it in the back....

hydraulic bolt cutter?

I have seen many videos of the grey Series 2 lock being cut with bolt cutters but I have never seen a video of the Kryptonite Evolution getting cut with bolt cutters.

Didn't they improve the Evolution series of U-locks with the "Series 4" indicator? Do these still work with the inferior locking side and the better locking side?

can u attempt it on a Kryptonite New York Fahgettaboudit U-Lock i want to see how long this lock will take??

Which Mini was this? I'm trying to decide between the light Mini 5, which has a 13mm shackle, and the slightly heavier Mini 6, which as an 11mm shackle.

@tl9100

7 жыл бұрын

Mini 5

Wow... this is pretty impressive!

@newhuskytwenty

3 жыл бұрын

Two brands are the best in the market, ABUS and Kryptonite. All the rest could be enough or not depending the thieves but they are only imitations.

I wonder how many key cut variations for this lock?

@jshepard152

3 жыл бұрын

3, for maximum security.

Could you make the same test with an Abus Bordo 6400/ 6500 and Abus Granit X Plus 54/160 or 540/160?

@tedbiggs8336

5 жыл бұрын

lacosamia93 there are already tests with them not on this channel they used bolt cutters on the granit x plus 540 it took 48 seconds with an angle grinder cutting it 2 sides to release it and the bolt cutters did no damage and broke. Type I’m 540 Abus test lock angle grinder and bolt cutters

my right ear enjoyed this video.

The lock is just on the frame, not through it. Don' t do that. A thief could cut the hollow mild steel rack in one second, then just ride away. (he might have to secure the lock with a bit of cord)

Does this u-lock have a protective vinyl coating so that the lock doesnt scratch the bicycle frame ???

@yony120

8 жыл бұрын

+FilipVeliki94 No, it doesn't have one...

@experiment54

6 жыл бұрын

Put some tape round it if youre that worried.

@matthewcox1093

3 жыл бұрын

Yes it does it's kinda rubbery feeling. It won't scratch your bike dude

Bolt cutters are hard on this lock, but I have had two Evolution minis cut with angle grinders over the past decade. You'll never beat a thief using one of those.

@thebestever333

4 жыл бұрын

If someone is using and angle grinder than you chose a bad location to lock your bike and/or left it there for too long. The kryp evolution chain lock is great against grinders because it's hard to get a hold of

@dindanio1

2 жыл бұрын

@@thebestever333 agree 100% if they had angle grinders then your location is poor. Thiefs like to go in and out if its a good location then they would nt bother 9 times out of 10

@butWhyDad

9 ай бұрын

Bro no lock can resist angle grinder lol.

@The_Chosen_1ne

Ай бұрын

@@butWhyDad the kryptonite chain locks like the 1090 will stop angle grinders. Even solid ones like the hiplock dx1000 are impossible to get through with an angle grinder.

- Что вы делаете! Велосипед воруете!? - Нет, мы обзор снимаем - А. ну ладно, дальше пойду. Привет из России.

@TheLaXandro

4 жыл бұрын

-А раз обзор снимаете, у вас ключ должен быть

u need bolt cutter bigger than those two the one that are like 24 inches length..also with a bigger jaw possibly the one u see nypd or other security type department uses like fdny lols...or the one that school uses to clip your locks when u lock it overnight and dont remove your lock....

Wait for the bike rack to be full and then just unbolt the bike rack and stick it in a van.

Amigo, el kriptonite es un buen candado, y seguro, como lo muestras, aguanto el napoleon, imaginate como aguantaria si lo pusieras bien, agarando vainas,llanta y lo fijas al cicletero colocandolo a si se reduce el espacio para que lo puedan tronan

looks like the only thing you need to steal that bike is a spanner lol

Which Series is that one?

@experiment54

6 жыл бұрын

The old one. New U mini 7 is 14mm diameter.

All you need to do is try to cut a very small piece of the u-lock not the entire section at once. Use the tip of the bolt cutters, it'll be easier.

@petersmulders8058

Жыл бұрын

I see your well experienced with cutting high security locks lol

The Kryptonite Kryptolok Series 2 Integrated Chain has not yet been tested with hydraulic bolt cutters by the lock picking lawyer ;) It's also pretty light but is it solid enough to resist bolt cutters?

@yacothepilot

2 жыл бұрын

not common to have those just laying around

@WetaMantis

2 жыл бұрын

@@yacothepilot Agreed. At some point the weight is so high there is not benefit in taking something thicker.

Kryptonite has new small lightweight lock. The Evoution LITE Mini 6. I would like to see if bolt cutters will cut it. It is only 11 mm thick. The regular evolution locks are 13 mm thick.

@SugaHoneyIceTea36

6 жыл бұрын

Rick Rude yes They Will cut it

@janglestick

4 жыл бұрын

@@SugaHoneyIceTea36 that sux (I do wish there was video of it) . The steel on the 6 is supposedly harder than the others. I guess the ability to leverage down more on 11mm over 13mm wins out. Is there a lighter / mini version with the 13mm? I don't need the extra length of the lock, and I find that the thicker appearance of the cylinder seems to daunt thieves (and the shorter U gives less places to get leverage). btw if somebody still ends up with a mini-6 like me, definitely suck the grit out of the lock and blow it out of the rotating cuff, spin it around until the grit stops and spins smoothly and key goes in smoothly. The grit from the cuff can ruin the lock, but once the chaff is off it's fine.

@neolexiousneolexian6079

4 жыл бұрын

@@janglestick Go on their website. They have "Evolution Mini-4" through to "Evolution Mini-9" or something like that, with the number indicating the length in inches.

This one is easy to steal. The bike holder or whatever it is calls. It has skrews in the bottom. Unscrew those :p

Yea, but they could cut the smallest tube on the bike rack in about 5 seconds.

@boycemark6470

6 жыл бұрын

1stPlaceDirector or just unscrew the entire rack... lol

@dfpguitar

5 жыл бұрын

you can even cut the large diameter tubes on bike racks fairly easily with any cheap hacksaw. You don't need a quality blade either, dollar store faire will suffice. this rack however is particularly awful, it is not only removable by undoing only one nut, but the part you are "supposed" to lock onto is croppable with bolt cutters and the whole stand is rusty, seemingly made of very low grade steel. So even if you just had a brick, you could dent the stand and then keep flexing it till it snapped.

A thief broke my friend's mini evolution krptyo u-lock (same one in this video). Not sure what they used but it was likely a saw. Two thieves cut through the larger grey krypto u-lock (not evolution series) of one of my neighbors this am. I think the krypto chain lock for motorcycles is the best way to avoid bike theft in a high-crime city.

@littlegoobie

8 жыл бұрын

they look great on websites and catalogues but have you ever held one of those locks? they're back breakers and weigh more than my bike... each link is the size of a medium potato, they're very heavy locks.

@neolexiousneolexian6079

4 жыл бұрын

@@littlegoobie Brilliant. Lock it to the thief in advance so they're weighed down and can't get to your bike.

@adrien5814

3 жыл бұрын

Chains aren't that good. The evolution chain from kryptonite can be cut with cutters.

@kushpaladin

2 жыл бұрын

well yeah they left it vulnerable overnight....you can have the best lock in the world if you give the thieves enough time they can break any lock

quality u lock is the ultimate way to go

@BrainSeepsOut

9 жыл бұрын

Vova3iLvova Yep pretty much. There's nothing like some thick, hardened steel.

the weight of the person pressing the cutter is meaningless, he could apply more pressure if he would push against something from the top. (the ground is the bottom leverage and the top one could be if he crouched and push from the metal stand where the bike is standing. -> basically his back muscles could put out much more pressure than his weight) still, someone else might break it if he is stronger, or just use some grinder

is there any lock that you guys couldnt break?

The bolt cutter needs to be harder than the steal being cut. You need bigger and better bolt cutters

I Free'd a stripped frame in front of 3 people who did not believe i could and in less then 60 secs.. i picked the frame up twisted the frame till the lock could no longer move and with 1 final twist snapped the u lock off.. easy as pie.. yes i had lots of leverage using the frame and yes i dented the frame good.. but it was free and My point was made, and that was, if someone wants your bike bad enough.. with time and a little brains the bikes gone

Omg is that a toy cutter ?

This is why I bought it. So the thief will need an angle grinder. So Mr.Thief will be very loud.

@Mcfc2Rich

3 жыл бұрын

Logic 5⭐

@Inquirro

3 жыл бұрын

So what if he say that he film the review? 😀

@samshorto5433

3 жыл бұрын

I doubt anyone would confront a thief holding an angle grinder...

@matthewcox1093

3 жыл бұрын

@@samshorto5433 I would it depends if I catch his ass off guard I would try me best to rip it out of his hands

@samshorto5433

3 жыл бұрын

@@matthewcox1093 Then you're kinda stupid tbh. No bike is worth that risk.

hi nice videos. I'm wondering if you can recomend me a good lock for my bicycle. I'm from Chile and I will go to ride across america and I need a super safety and light lock I have 250 dollar for buying it

@footballchat6940

8 жыл бұрын

+Alfonso Quintana almax chain and lock

@matzmx

4 жыл бұрын

Onguard pitbull dt shackle u-lock.

D locks are best

You cant really walk down a street with a 36" bolt cutter lol, what i tend to do is use multiple locks and twin anchor points as much as possible, what i have noticed is i came back and they had not touched mine at all, but the bike in front had teeth marks - not sure what was used, and a bike behind had the same marks, and there was just a backwheel behind that still chained to the secure bar. My locks are all kryptonite - mini front wheel to frame, rear wheel through frame to bar, hi tensile cable front to back and through pedal crank, and a third krytonite to a secondary point usually it only just reaches. OK it takes up two bays, but hey they left it alone - didnt even try to go for it.

@ckwunch8028

8 жыл бұрын

deadbirdy I live atm back in UK, here they cant get away with that. ***** jesus is a popular name in some parts of the USA, so a cop called jesus would be the most likely way your reply could happen.

@shechshire

8 жыл бұрын

+deadbirdy Those cordless grinders don't work on onguard beast chains. It'll take over an hour which is probably more than the battery life of that crap or how many razors you are going t have to go through.

@Galf506

8 жыл бұрын

+CK Wunch Can you walk around with a backpack? Yes. So you can walk around with a 36" cutter. Plus, at least in my city, bike thieves are organized enough that they could easily carry even bigger tools. Biggest factor is noise, which is why you don't see them around with power tools, but if they could, they would.

@shechshire

8 жыл бұрын

+CK Wunch If you can cut one, you can cut the other so it won't make a difference how much you tether or anchor and it' also true what the others are saying about carrying stuff in bags or hardware boxes. Like I said before, the best way to go about it is to have a light weight lock/chain for regular and everyday areas and a heavy duty lock/chain for dangerous areas. I have an onguard beast pad luck and chain that is long enough to go through all parts of my bicycle.

@3brenm

7 жыл бұрын

you definitely can, theyre doing it in this very video

Bolt cutters might do little damage, but they are unfortunately easy to pick.

@loooooopy

4 жыл бұрын

If you can pick locks, you can earn more money than stealing bikes

@almirmerovic6816

2 жыл бұрын

Easy for who? You’re average bike thief isn’t going to “easily pick this or most any lock

how about portable grinder

rubbish them small ones with a bit of elbow grease would have gone through that like butter

1:05 Who else sees the obvious, easy way to take this bike?

I've never seen an Evo sold for $65 , they are much cheaper than that even in the UK where they cost considerably more than the US. Also that bike stand is the worst I have ever seen. You could lift it off the ground by undoing just one bolt. You can also easily crop the skinny bar that the bike is locked to with your small bolt cutters. It will be made of mild steel that you could cut even with a wire saw.

@BillOweninOttawa

2 жыл бұрын

Many like that where I live here in Ottawa. That's because cities, which are run by car people, for car people don't understand the problem and if they don't care. The police will do literally nothing if someone steals your bike. It is not taken at seriously no matter how expensive the bike is. They will, however, spend their entire shift running licence plates looking for stolen cars - because stealing cars is a very "bad" thing in a city run by car people for car people.

Bolt cutters are not the only way to defeat a Kryptonite lock.

@veryniceflower5175

8 жыл бұрын

+Jay Harvey explain

@Kris2340k

8 жыл бұрын

many people use portable disc saws. You will be suprised how few people are willing to do anything to a guy holding one.

@addicted2baseballrgd21

6 жыл бұрын

Yes, but this is the common tool. The lock is meant to deter a thief to steal another bike.

@djnd250

6 жыл бұрын

Use a hammer for any Ulock

just cut the bike rack simple

I haven't had any HUGE issues with this lock yet! kzread.infoUgkxfyHDlEqk6hqu9acdvK5NGzZsGKSokSbv It seems sturdy and like it will get the job done. I really like that it has a twisting lock feature to keep out dirt and debris. However, the mounting system is much too light for the lock, and continues to get loose/move around. It's mostly made of plastic parts, and I've had to tighten it a few times in the past week or so that I've had it. I'm worried that it's going to break off at some point while I'm riding. I'm considering just scrapping that part, but that would mean having to carry the heavy lock i my backpack and adding more weight. I wish I could have given this more stars, but without the mounting system, it's just another heavy lock that I have to cart around. UPDATE: Increased rating to 5 stars because the seller offered to provide a new lock and mounting system. Really appreciate the attention to customer service!!

damn, those are pretty resistant.

So, next time you steal a bike, bring camera without you and no one bothers you.

@doge-xj7zb

2 жыл бұрын

Lmao exactly what I was thinking

Get some decent bolt cutters

We attempt to cut the shackle on a #Kryptonite #Evolution Mini using 12" and 30" bolt cutters. kzread.info/dash/bejne/ZZmCq8GMeJWfp5s.html @kryptonitelock

@Grek121

9 жыл бұрын

what name this bolt cuter?

@Houseofchain

9 жыл бұрын

We call him Clyde. It is a house brand set from a local Canadian hardware store.

@Grek121

9 жыл бұрын

Do you test Onguard U-lock?

@Houseofchain

9 жыл бұрын

We have plans to. Subscribe to us and stay tuned!

@Grek121

9 жыл бұрын

House of Chain I Subscribe . great channel !!!!

dude i could have cut that you cannot use bolt cutters cut a point and bounce on it it’s going through with smaller bolt you cutters you can cut solid steal you literally just out your weight in it and the pressure moves the handle to the side you need to keep them straight and apply pressure on and off send me a lock i’ll prove you wrong

Easy brake. Bike thief won't be playing around like that. Set up the cutters.

Akkuhydraulischer Bolzenschneider EBS 12-L

Wtf is this Vancouver?!? Haha

bullshit... he didn't even use the correct angle when bracing against the ground.

Ive cut this lock with bolt cutters... This guy doesn't know how to use them... You cant just put all your weight down.. you gotta bounce.. hard... rhythm...

Maybe you should learn how to use the tool before any testing...

Of course the "smart" thief will simply use the bolt cutters to snip through the seat stay like it's a little piece of wire. Walk the bike around the corner, toss into the back of truck, drive away, sell parts.

@SONGBIRDFLARE

8 жыл бұрын

"seat stay like it's a little piece of wire." ??? can you elaborate? You talking about this video? What little piece of wire??

@glennblanchard1669

8 жыл бұрын

+Michael Cher I said the seat stay is "like" a piece of wire....as compared to a battery powered angle grinder. The angle grinder will cut through those bike tubes like butter in seconds. Pull the lock through the cut frame, toss it in a pickup, sell parts.

It dont take a genius to work out that this sort of lock was not going to be cut with bolt cutters you need a grinder still entertaining to watch your try

That 30" bolt cutter is not correctly setup, you have to increase the gap between cutters and then the handles will come closer too each other and you get maximum leverage. You are not even getting 50% with that bolt cutter, and it would in no doubt, cut that in 2 seconds if the gap was correctly set :) I prefer to use cordless drill operated bolt cutters "hydraulic", they are small and fast.

@marcusswell4824

7 жыл бұрын

Harbard thank u finally someone else understand

@harambereincarnation2640

7 жыл бұрын

Harbard bellend

He ain't 200 lbs, that is 90 kg...he's built like a twig...Krypto NEW U locks are pretty crop resistant..that mini 5 is an old type with a bent foot shackle.

This is not true,the large cutter 100% can cut off with this only 13 mm hardened shackle, Do not trust this video if you not wish for become victim of the bike theif.

face the camera when you talk or have the cameraman stand on the other side of the bike.

Bullshit, they got me and my wife's bikes.. there is no security

@addicted2baseballrgd21

6 жыл бұрын

They got this model, with bolt cutters?