I learned more from your video than I did from all of the Kreg videos. Well done!!!!!!!

@ForestToFarm

2 жыл бұрын

Thanks! And thanks for watching!! Terry

Say what? Kreg Draw Slide JIG? I installed some sliding drawers in my kitchen about 1985 and they were a pain. Of course we didn't have KZread then and I had to wing it, but my Dad was impressed with what I did. My mother-in-law wanted me to do her kitchen and I told her "NO!". I'm sure your video will come in handy in the future and I'll teach my daughter and grand kids how to do it. Thanks Much!

@ForestToFarm

5 жыл бұрын

Glad to be of service. Thanks for sharing. I love teaching kids new things. having them learn from our videos is awesome! Terry

I watched a bunch of these Kreg jig and this was the best video Thank you

@ForestToFarm

Жыл бұрын

Thanks for the kind words! You’re welcome. Terry

Dear Terry, There is great delight to be had when a job has been done as precisely as you've just done. No doubt many years of reliable & trouble free service just as one would expect. Very well done.

@ForestToFarm

4 жыл бұрын

Thanks! We are not perfect but we try hard. Terry

@toolsconsumables7055

4 жыл бұрын

@@ForestToFarm Dear Terry, Thank you very much for your courteous & hearted reply. If anything what your videos show is that the pair of you go about doing things as well prepared as possible with considering every possible eventualities. A great deal of attention is paid to preparation & final execution. You both are very thorough in your work & very methodical. What more could one possibly expect when a perfect job is what is sought after in the first place??? There is nothing more embarrassing ( whether it comes from Honourable wife or anyone else for that matter) being told the job you did requires your attention yet again. Murphy's law being what it is, it will always be at a time least convenient for you to attend your recall which could have been avoided if the job had taken a bit more preparation &/ execution. I think your philosophy is the only good insurance that you've taken everything into consideration & are less likely to return to it for correction ( my kind of work ethic). Well done once again. Kind regards.

@ForestToFarm

4 жыл бұрын

Thanks! Terry

@toolsconsumables7055

4 жыл бұрын

@@ForestToFarm Dear Terry, I say what I mean & mean what I say. Your actions speak louder than words. Kind regards.

One of the best side mount videos out there. Sir, you install the mounts with a countertop already installed. Everyone else cheats and no countertop installed. Making it look easy.. I do have a question, for a bottom drawer, what is your recommendation to install the mounts. Can't use the Kreg there. I installed Blum undermount with the Kreg at my house and the bottom drawer was tough. The Kreg tool was worth every penny. Thanks

@ForestToFarm

4 ай бұрын

You’re welcome. Thanks for the kind words. Sorry but we only put drawers at the top. Whenever we finally get to building our houses we will have all drawers and no doors so guess we will have to figure it out then ha ha. Terry

Finer than Frog Hair. You explain things very well Terry, thanks buddy.

@ForestToFarm

5 жыл бұрын

Lol! Thanks dean! Terry

Great video!Great information on installing sliders!🔥🔥🔥

@ForestToFarm

Жыл бұрын

Thanks! And thanks for watching!! Terry

Awesome video!!!!

@ForestToFarm

3 ай бұрын

Thank you and thanks for watching! Terry

@thehobbyfanatic4610

3 ай бұрын

@@ForestToFarm you bet!

The kreg drawer-slide jig is cool. Never seen that one before.

@ForestToFarm

5 жыл бұрын

Hey Lucas. Yeah that jig makes it easy to get the job done. Modern technology is changing the world. Terry

When I make my drawer front and back pieces I take two inches off the opening. Half inch for each slide and a half inch for the half inch plywood. I find that the little bit play that the undersized plywood gives me makes the drawers operate very smooth. I've built two kitchens and many vanities this same way and the drawers turn out perfect. Nice demonstration on the kreg jig, just picked one up for my current kitchen project.

@ForestToFarm

4 жыл бұрын

Thanks for the tips! Thanks for the compliment! Terry

Thanks for the details. That clarified slot for me.

@ForestToFarm

4 жыл бұрын

Glad to help!! Terry

Great tips and channel! New subbie! 🌻

@ForestToFarm

4 жыл бұрын

Thanks! Terry

Thanks you for your tools

@ForestToFarm

3 жыл бұрын

Your welcome! Terry

Thank you for the video. I'm having trouble with this process when using the rear brackets on the framed cabinets. Any suggestions on how to get equal spacing?

@ForestToFarm

Жыл бұрын

Sorry for the delayed response. Off hand maybe you could make a spacer equal to the gap between the slide and cabinet side at the front and place it at the rear while installing the drawer slide? Good luck!! Thanks for watching. Terry

Rick Flair is a cabinet maker!!!?.? Nice demonstration. Thanks.

@ForestToFarm

3 жыл бұрын

Woooooo!!! Terry

@ForestToFarm

3 жыл бұрын

Your welcome. 🤪

Hey guys the summer is coming to a close..... when are you going to get to the farm ? Would really like to see some content at farm not the kitchen remodel that seems to have gone on for ever. The kitchen is looking good.

@ForestToFarm

5 жыл бұрын

Very soon. Yes this kitchen has been a long project. Lots of new ground covered for us. It has given us new skills to use when building our houses. Life has gotten in the way multiple times in the last several months but I think we are finally going to get to start working on Brian's house and then ours. Believe me its where we want to be but its just taking a lot longer than we would have wanted to get there. Its all going to be worth the time and efforts when we do get there. Thanks on the kitchen comment. We are very pleased with how things have turned out. Terry

@fcksticksable

5 жыл бұрын

@@ForestToFarm great to hear that you getting back at it. Hoping all is well and you and yours stay well.

@ForestToFarm

5 жыл бұрын

Thanks! Terry

I'm replacing drawer slides on older cabinets with soft close slides (rear bracket mount) and the slides rubbed a grove down both sides of the drawer after install. Is there a correct way to solve my clearance issue? The slides require a 1/2" on each side, I have that when measuring the inside of the face frame, but the outer part of the slides still rub the drawer box making it hard to close/operate. Should I plane the drawer sides a little? Can I sand the inside of the face frame on each side?

@ForestToFarm

3 жыл бұрын

Tough question since I can’t see it but the first thing that cones to mind is do you have those slides properly mounted as in line with the drawer width? They may be off a little which could cause them to drag or appear to rub. They could be to close or to wide or shifted left or right. Hope this helps. We do not have a lot of experience replacing older slides on older cabinets. Terry

when i clamped it on it was not level on the inside and i checked everythings around it to make sure it was square and level

@ForestToFarm

4 жыл бұрын

Hmmm. Not sure what is going on there without being able to actually see it. Terry

What these Krag Jig videos don't show is how they work when you have to use back drawer slide brackets.... Its a whole different story.

@ForestToFarm

2 жыл бұрын

Yeah theres lots of possibilities. We just covered what our situation required. Thanks for watching!! Terry

how does it work on bottom drawer?

@ForestToFarm

3 жыл бұрын

We did not have any bottom drawers. Never gave ait a thought but when we finally get going on our house builds on our property I plan to have all drawers and no doors on my kitchen cabinets so check back then and we have some type of solution. Sorry I was not of more help. Terry

After you work with metric In millimeters you will never go back to Imperial ,I grew up with imperial moved to Australia ,used metric so much easier you work in units of a 100 much easier ,you Americans across the pond should change ,oh thanks for lesson on door slides thank you

@ForestToFarm

3 жыл бұрын

Your welcome! Yes I agree your system is better and I knew it well while studying electronics engineering in my younger years. I do not see America ever changing and so over the years I have lost most of my ability in your system but it is far superior to ours. Terry