its ability to break free nuts and bolt at 300 ft-lbs of torque is amazing for a battery powered tool this size. this is a must have tool for backyard mechanics especially if you do your own exhaust and brake jobs. Great review. The audio and video quality is A+.

@mike_t_007

Жыл бұрын

Agree 100%! This tool is great for what it is. An alternative for this is the DeWalt DCF850 with the 3/8 anvil swapped in. Better performance and smaller size! Have a couple videos of it on my channel 😎

Well, Kobalt must have seen this. It is April 2021, and the price is up to $149. I was able to get a discount with the "buy more get more" deal. Thanks for the review!

My Kobalt impact ratchet & high torque wrench have been nothing but amazing for me as a forklift mechanic. That wrench can loosen 36mm wheel nuts with ease!!

Upgraded from an older 18v kit. kzread.infoUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.

I've been turning wrenches since 1974 so I've used just about every impact known to man, after seeing your video i went ahead and purchased the Kobalt 24v right angle 3/8" impact wrench.

@Shoptoolreviews

3 жыл бұрын

Glad I could help. I hope you like it. Thanks for watching.

@buddy7013

2 жыл бұрын

Put a 3/8 socket fit directly on the end of the right angle impact wrench I was trying to put a socket on it it will not fit

@Thorsanbauer

2 жыл бұрын

@@buddy7013 pretty rough problem the hog ring is too loose I read a post where you put some vice grips on it overnight and it fixes the problem worked great for me

@mike_t_007

4 ай бұрын

How is it holding up and how do you like it?

I have a set of Kobalt cordless tools. I got them on a Black Friday sale. I love them. Way less expensive than Dewalt or Milwaukee brand tools, but (for my purposes, just working around the house and an occasional project here or there) they're great. I paid $250 for a set of 5 tools, two batteries and a charger. They look great too. I like the blue and black color pallet.

@Shoptoolreviews

3 жыл бұрын

That's awesome. Glad you like them. Thanks for watching.

This is my favorite tool review channel. Your testing methodology is thorough and your explanations are concise. A++++

@Shoptoolreviews

3 жыл бұрын

Thank you very much! We really appreciate this. Thanks for watching.

@caesarray4597

3 жыл бұрын

Ibrtdy I agree

@benfairhall5331

3 жыл бұрын

Ibrtdy I don’t agree. Why does he use a adapter welded on a socket. Why not just run the correct size socket.

@justinwingfield2271

3 жыл бұрын

Check out project farm.

As of 6/11/23 Lowes sells (on line/pick up) a 24V charger w/ 2ah & 4ah batteries w/ a FREE tool. One of the choices of free tool was this 24V RA impact wrench, so i ordered 2 lol! Paid $107 (per order) w/ mil discount, picked up an hour ago and very happy got the tool (2) for free. Can’t beat that!

Wow thanks for this video. I’ve been wanting to see a video like this reviewing the Kobalt right angle impact. I’ve been on the fence to get this tool. I am thinking for sure now I’m going to pick it up. I am impressed with all my Kobalt tools. Thanks again for doing this fantastic review. Very impressive.

@Shoptoolreviews

3 жыл бұрын

Glad it was helpful! This right angle is pretty impressive. Thanks for watching.

I like this channel and project farm for my tool review viewing. Both channels are top notch with excellent well thought out content. Thanks for all you do, makes my decisions a lot easier.

@Shoptoolreviews

3 жыл бұрын

Thank you very much! PF is a great channel and he's a great guy, so we're glad to mentioned along with them. Thanks for watching.

This channel is in the top 5 tool reviews to me. Positive and keep things interesting and always thorough.

@Shoptoolreviews

3 жыл бұрын

We appreciate the feedback and thanks for watching.

Nice tool I just bought this yesterday. Loving it, makes the job so easy

@Shoptoolreviews

2 жыл бұрын

Great to hear! This is a great tool. Thanks for watching.

Subscribed. Great presentation. I just ordered this online for $99. Thanks and have a great Christmas. You sure made mine bro.👏

@Shoptoolreviews

3 жыл бұрын

Thanks for the sub! Let us know what you think of it.

awsome review !!! my new favorite channel 👌🏽💯

Thank you for the test reviews!

@Shoptoolreviews

3 жыл бұрын

Our pleasure! Glad you like them and thanks for watching.

Great review. I just discovered your channel, liked 👍 & subscribed! Excellent video for real on the job site work.

Got one of these puppies a few weeks ago. Color me impressed. The trigger is actually a 5 stage.

Hell yeah! Been waiting for this video. Thank u. Been wanting to buy this tool over the Milwaukee but im broke so 100 bucks is way better then 200 bucks. Can we plz get a shoot out video. Milwaukee right angle impact ratchet VS kobalts right angle imapct wrachet. Shit would be a epic! Been looking for a video like that but no one has it

@Shoptoolreviews

3 жыл бұрын

We'll probably do this in the next few weeks. Thanks for watching.

I own one myself and it is a impressive impact. Hopefully they will come out with a 1/2 inch version.

@Shoptoolreviews

3 жыл бұрын

Yes, it is impressive. We would like to see a 1/2" version as well. Thanks for watching.

@rickster2c

5 ай бұрын

They have adaptors to convert them to 1/2”

Wow! That tool put up some impressive numbers!

@Shoptoolreviews

3 жыл бұрын

Very impressive, and we were surprised. Thanks for watching.

Great channel , tests are great and take all hype out and shows only results

@Shoptoolreviews

3 жыл бұрын

Glad you like them! Thanks for watching.

That Cobalt ratchet tool is really nice, I think I'm going to have to pick me one up. Thanks for sharing. #PEACE✌🏾

Another good review. I am amazed that Kobalt seemed to step up there game just as Lowes made the deal for Craftsman.

@Shoptoolreviews

3 жыл бұрын

Yes, this is an impressive tool. Kobalt 24V tools are made by a different manufacturer now, compared to their older tools. Performance and build quality have been raised, for sure. Thanks for watching.

@jstpsgthru

3 жыл бұрын

@@Shoptoolreviews Are they not made by Chervon?

Thanks for the info 🔥

Got this tool as free gift with purchase of the 1/2 24v kobalt xrt impact and it's a beast cant beat it

Great video thank you

I love mine have used it on my 300zx restoration when removing radiator and fan clutch.

@Shoptoolreviews

3 жыл бұрын

Awesome, it's a great impact for those tight areas. Thanks for watching.

@gamepro9505

3 жыл бұрын

Z31 or z32?

@ogm19881

3 жыл бұрын

@@gamepro9505 1990 z32 na

I have this tool and I love it

Thx great review✌️👍👊

@Shoptoolreviews

3 жыл бұрын

Thank you very much and thanks for watching.

You really need to add another row of fasteners 19mm or 3/4" so you can test 3/8 drive tools without using an adapter.

@jackedburton7639

3 жыл бұрын

First thing I noticed too. Losing a significant amount of power.

@Shoptoolreviews

3 жыл бұрын

It's not really losing a lot of power, but we have now added a row of 24mm head (16mm diameter) class 12.9 bolts that should hold up to 250 ft-lbs. Thanks for watching.

@kevinragsdale6256

3 жыл бұрын

The adapter is welded to the socket, and power loss is minimal that way and is negligible.

@benfairhall5331

3 жыл бұрын

But why use the adaptor????

@richardmejia254

2 жыл бұрын

@@benfairhall5331 , just a guess here, but thinking because the 3/8" sockets don't go that big (or at least, aren't common). The Torque Test Channel had 1 made custom for their head to head test of both, this Kobalt and the Milwaukee right angle impact wrench.

Great video but I like the torque test Chanel 15 second best case scenario. They prove that the tools still have a lot more to give past 10 seconds. Also you didn’t check battery life on camera with the 325 test. It would be nice to see that test again with a fresh battery

Great channel. I would like to see how the Hart 3/8 in right angle wrench does.

That is very impressive. I see that DeWalt is jumping into this train. Curious to see how theirs will perform

I was pretty impressed with its performance for a small angle drive impact wrench. I never use one before so I did not know what to expect......and now I do. Thanks for the great informative video. Barry

I can't wait to use mine

@Shoptoolreviews

3 жыл бұрын

Let us know what you think. Thanks for watching.

Ingersoll rand has been producing this tool for atleast 6 years. Ive had mine for atleast that many years. Ir is 20v but is an awesome tool.

@Shoptoolreviews

3 жыл бұрын

Excellent! Thanks for watching.

Thank you for the informative video. Uploaded 3 years ago, "you can buy this for $99", $150 now SMH. 😢

Pretty impressive for a 3/8 drive tool. I have one of these ordered and I''m happy to see that it will be a great addition to my kit. BTW , if you buy it on line , you get an instant discount ...I paid only $73 for mine, with free shipping.

@enriqueb4412

3 жыл бұрын

Where did you buy yours at?

@Shoptoolreviews

3 жыл бұрын

That's an excellent price. Thanks for watching.

@casehornback3099

3 жыл бұрын

Where did you buy it

@buddy7013

2 жыл бұрын

Do you need a special adapter to put a 3/8 socket on it because I cannot get a 3/8 socket directly on it could anyone help me thanks

@jamesr.9239

2 жыл бұрын

@@buddy7013 Well , they were made for use with impact sockets which is what I use , so maybe the tolerances are a little different . It could be a means to prevent the use of sockets that might fail under load.

Awesome...a 3/8" right angle impact that acts like a 1/2" one!

Impressive nut busting power!!! And tightening was pretty much on too!! Great video, I wonder if it’s quieter than the fuel 🙋🏻‍♂️

@Shoptoolreviews

3 жыл бұрын

Good question! We didn't measure dB, but we can in the future. Thanks for watching.

@ProxyFinal

3 жыл бұрын

i don't know if you take vibration into consideration as well. I use impact wrenches for deck projects and one of the things I pay a lot of attention is the vibration of the tool. Probably not so much for people that do mechanics, but driving general lag screws while the tool is vibrating can really fatigue you overtime. So far....Milwaukee is the only brand I know that has minimal vibration with their impact wrenches and then there is Kobalt......unfortunately Makita and Ridgid not so good on that department.

Milwaukee M12 right angle impact with 6AH battery vs the Koblat.. That will be awesome to see. I'm a Milwaukee fan boy but my money is on the Kobalt, just because the Kobalt is 24 watt vs Milwaukee's 12v.

@Shoptoolreviews

3 жыл бұрын

We will do this very soon. Thanks for watching.

@infiniti37G

3 жыл бұрын

The kobalt should destroy it with the 24V. Im buy it

@ATLHEAT89

3 жыл бұрын

Milwaukee is stronger I have both!

Great test! Hard to believe Kobalt beats Milwaukee 2564-20. Then again, Kobalt is twice the voltage. That is a huge advantage. I would like to see Makita come out with a right angle impact in a 12 volt max CXT 3/8" version. I'd be willing to bet it's already out in other countries.

@scottcpan68

Жыл бұрын

Ridgid just announced 2 new 18V Right Angle Impact Wrench's, in 3/8" and 1/2". They haven't released the specs yet, it just says "coming soon".

I have a feeling if you used the right sockets 3/8s it would do well over 300.

IMPRESSIVE!!!

@Shoptoolreviews

3 жыл бұрын

Thanks brother! Oh, you probably mean the tool is impressive. lol. Yes, this thing was pretty powerful, especially for the money. Keep up the hard work!

Man I’m going to have to get one for sure 300lb break that’s great for 150 dollar tool

@Shoptoolreviews

3 жыл бұрын

Yes, this Kobalt right angle is a great tool. Thanks for watching.

I bought mine and like it so far however the anvil is the worst part of the system. I find it very difficult to take sockets on and off which makes me want to return it because of that. Did you have any similar issues with yours?

Can you tell me why I can’t use my regular sockets on this right angle impact wrench ? It won’t fit

wow thats a cool tool. Will it allow you to manually loosen something like a impact wrench? I got the m12 Milwaukee impact wrench, and I barely ever use a standard wrench anymore. They don't have a lot of break away torque but once you manually break it free, then they are so much faster to loosen and tighten things. If this thing has a lot more torque than those, this could be great for bigger bolts like brake calipers and stuff.

@legros731

3 жыл бұрын

This is a impact not a ratchet you can't manually loosen fastener with it if it can't remove it with the motor/impact it will not work

How does this compare to Kobalt 3/8 and 1/2 in Impact. Also I was wondering how those tools would compare against Makita DeWalt and Milwaukee

I got this and Rachet wrench and two battery a 4amp and a 2 amp battery plus charger for $240 at Lowe’s is that a steal ? Because I only use dewalt and Milwaukee brand I got this just to get it

😭🤧🤧 I returned my right angle impact wrench way too early, I was waiting for this vid like this.

@Shoptoolreviews

3 жыл бұрын

That's a bummer. Well, I guess you can always repurchase it. Thanks for watching.

I have this Kobalt right angle impact wrench. It is powerful but it is so difficult to get 3/8” impact sockets on and off. The friction ring is killing me. I ordering another set of 3/8 impact sockets to see if it is sockets issues or the impact wrench issues. Might need to bring it back to Lowe’s to exchange another one. It is much worse than Dewalt impact wrench friction ring.

@pentiuman

2 жыл бұрын

What was your finding on the difficulty of removing sockets, as I've read others have complained about too?

Thanks for the review. Do you think this is stronger than the Milwaukee?

@Shoptoolreviews

3 жыл бұрын

I think so! We will see very soon. Thanks for watching.

Great review, it would be great to see this against milwaukee m12 with 6amp battery I think it would be close!

@Shoptoolreviews

3 жыл бұрын

We may compare these pretty soon. Thanks for watching.

@juanc5149

3 жыл бұрын

It’s going to stomp on the 12v Milwaukee.

@alyusmuse3839

3 жыл бұрын

@@juanc5149 k, good for you, hope you are right •^•>

@juanc5149

3 жыл бұрын

@@alyusmuse3839 Singlecam yt channel the Milwaukee m12 right angle impact on a skidmore wilhelm. That’s how I know.

@juanc5149

3 жыл бұрын

@Bailey Hatfield I take it, that you don’t know what a skidmore wilhelm is. It test actual fastening torque. And it’s the most accurate method of doing so. Anyways on that test the Milwaukee angle impact wrench put 107 ft lbs of fastening torque. Granted it did use a bigger nut so that might be a factor. (But doubt it as the nut is still smaller than the impact mechanism.)

This is pretty much identical to the ingersoll rand model, few slight differences like 20v vs 24v, ingersoll don’t have a light.. etc but for the design, head size, handle, and the way the battery goes is in identicall

Is there a kit that comes with a battery and charger

What is the different 4 ah battery and 2 ah

Didn't expect that from a kobalt honestly

@Shoptoolreviews

3 жыл бұрын

We were surprised as well. Very healthy tool. Thanks for watching.

You should try it out with the ultimate output battery

I love mines

It's ok mine won't remove a lug nut but does remove most nuts and bolts.also what battery would you recommend for it I have the 2ah and 6ah battery witch is better to run on it

@Shoptoolreviews

3 жыл бұрын

I like to run ours with the 4Ah battery. I'm surprised that yours won't remove lugnuts. Thanks for watching.

Really wish Makita would make one of these. Hate to buy into another ecosystem for one tool.

For fun, why didn't you recharge the battery to try if it could break >325 ft lbs?

I wanted to get the Milwaukee ratchet. Im buying a Kobalt after watching this. 😳😳

@Shoptoolreviews

3 жыл бұрын

This Kobalt is legit. Thanks for watching.

Thank you so much for this video متشکرم

@Shoptoolreviews

2 жыл бұрын

Glad it was helpful! Thanks for watching.

Kobalt 24v max xtr is great! Like video

@Shoptoolreviews

3 жыл бұрын

Thanks for watching.

Bruh I just priced those lion torque guns out of curiosity and holy shit

Do you think this would be better than the Milwaukee gen 3 compact impact gun since it has more actual nut breaking force at 320 ft lbs? I just ordered this from Lowe’s and the two 4 amp batteries and charger.

@Shoptoolreviews

3 жыл бұрын

That's kinda Apples and Oranges. I don't think you went wrong buying the Kobalt right angle, but I think you'd love the M18 Gen3 as well. Thanks for watching.

@weduhpeople8504

3 жыл бұрын

@@Shoptoolreviews I picked up the Kobalt right angle impact yesterday. I’m now thinking of returning the gen 2 Milwaukee 1/2” mid torque I just bought for the Kobalt 24 volt xtr 1/2” rated at 1200 ft lbs since I’m already on the xtr platform. More torque with 24 volts, batteries cost less. I will probably buy the Milwaukee gen 3 compact impact 1/2” since it’s the same size as the m12 stubbie impact. What you think?

@weduhpeople8504

3 жыл бұрын

@@Shoptoolreviews Got the 1/2” Kobalt xtr high torque and the thing is a massive beast, lol. Idk if I would really need this working on mt Fk8 Honda Type R. I mainly do bolt on mods like fmic, brake pad chsnges, rotor changes, sway bar, some fuel mods like port injection kit I need to install, turbo kit install.

Kobalt tools are way underrated.

@Shoptoolreviews

3 жыл бұрын

It definitely seems this way. Thanks for watching.

@jasonhull2163

3 жыл бұрын

I agree they always seem to hit harder than what they are rated. Rigid and Ryobi always throw about bullshit torque specs.

I know this is a year later and prolly won't get read by the creator, but why was such a big bolt and nut needed for the tests? You lose power with adapters, extensions, swivels, and whatever else you put between the tool and socket. I wonder if the tool has enough power to break that 325 free in less than 10 seconds, and struggle with but maybe get the 350. Regardless, I love kobalt and am always impressed with their tools. I find they like to underrate the power of their tools alot. I kinda wonder if that's the power you can get when about out of battery, and more with a full battery.

I wish I could get this in the UK with battery and charger. Is there anywhere in the US that would ship to the UK?

@scottcpan68

Жыл бұрын

Ebay..

How good you think this is compact to Milwaukees?

@Shoptoolreviews

3 жыл бұрын

It's definitely impressive. We'll have to put them head to head very soon. Thanks for watching.

Can you please review xtr impact wrench? Like super please.

@Shoptoolreviews

3 жыл бұрын

It shouldn't be long. ;) Thanks again for watching.

@ProxyFinal

3 жыл бұрын

@@Shoptoolreviews I guess the reason they just rated it at 180 ft lb because it seems to start struggling at around 200. I don't know if you ever pay attention to Lowes' customer feedback, but their customers love to nitpick at every little thing. A negative review is more apparent at Lowes than Home Depot only because there are far less reviews from people that really care to give feedback as opposed to thousands of reviews at Home Depot. Don't know if that has anything with them underrating their specs, but if it overperforms the claims then they figure people would stop complaining it can't.

Plzzzzz do the xtr 1200ftlbs impact

How would this would be against the M12 angle impact??? Would this have any chances against it???

@Shoptoolreviews

3 жыл бұрын

We will compare them in the next few weeks. Thanks for watching.

@Jarco101

3 жыл бұрын

@@Shoptoolreviews awesome!!! You are very welcome

I bought this tool ad have IMMENSE difficulty putting on or taking off any sockets from it. Like I can only get sockets off with pliers and a LOT of pulling an prying. Anyone have a similar experience?

This would of broke lose that 325ft lb nut if you used the ultimate output battery instead of the regular one 👍🏼

I hate/love this review because I'm a Milwaukee guy and was about to make a jump on the M12 right angle impact wrench, now I'm thinking this would be a better tool for my automotive needs, sorry Milwaukee 😢

$500 with one 4ah battery and a charger shipped here in Canada because we get gouged. Think I might still pull the trigger. Have some dewalt stuff I'm going to try to sell as a package for $4-500 and then maybe I'll get this thing. Need something to zap off semi truck u joints. Have a high torque 1/2 inch dewalt but it just won't do it from torque loss through driveline socket that is about 4" long. If this kobalt will fit in between the yokes I'm buying it. Sick of laying in the snow on the side of the road next to my $330 dewalt with a Johnson bar on the u-joint cursing

Why is so hard to install sockets and taking them off ? Anybody had same issue?

Do most of these companies overrate their tools and kobalt does the opposite? I have a makita that is rated for like 400 ft pounds and struggles removing lug nuts on my car. Also I see the advantage of a right angle but for the weight and length of this tool I would still expect more power. What is the ideal purpose for this tool?

RatchetWrench: When are you going to test the Kobalt 24-Volt Ratchet Wrench?

@Shoptoolreviews

3 жыл бұрын

We'll see if we can work it into the schedule soon. Thanks for watching.

Would this Kobalt break free a caliper bracket bolt

@rickster2c

5 ай бұрын

Yup i did it on mine and worked no problem. Also my lug nuts as well

@mike_t_007

4 ай бұрын

Yup kzread.info/dash/bejne/rGdkzNdyera-d8Y.htmlfeature=shared

Hello can help me please to find the charger and the battery for this model impact wrench, I can’t find it , please some one can share the part number please 🙏

I’ve had my eyes on Kobalt 24v for a while. I’m sold with this ratchet.

@Shoptoolreviews

3 жыл бұрын

Enjoy your new purchase and thanks for watching.

How's this compared to the m12 right angle impact

@kevinragsdale6256

3 жыл бұрын

like garbage

@casehornback3099

3 жыл бұрын

It beats it

@casehornback3099

3 жыл бұрын

But idk about lasting as long

@sinisterx9029

2 жыл бұрын

@@kevinragsdale6256 Milwaukee fanboy I see

So the kobalt Right angle impact is much stronger than the Milwaukee right angle impact Will head to lowes to pick it up

@Shoptoolreviews

3 жыл бұрын

Looks like it. We'll do a head-to-head very soon. Thanks for watching.

@CKBrutus

3 жыл бұрын

@@Shoptoolreviews looking forward to it. I did get the Kobalt and its much stronger than my Milwaukee

@angelisone

3 жыл бұрын

ATG, Shop Tool Reviews & I tested them. This Asian tool is better (power) than the other Asian tool.

Wow

Cause of the 24v, nice bit of gear.. better then the 12v milwaukee

@Shoptoolreviews

3 жыл бұрын

It's a great tool. Thanks for watching.

@kevinragsdale6256

3 жыл бұрын

higher voltage does not automatically mean better, the 12v milwaukee is smaller, lighter, and stronger. Try again.

@Chris-killinit

3 жыл бұрын

@@kevinragsdale6256 that's your experience, anything with more juice helps the equation along, you keep your 12v,

jesus christ that thing is massive

@Shoptoolreviews

3 жыл бұрын

It's long, but it's not very tall or wide. Thanks for watching.

Can you review this 05:45 tool or this 05:51 tool?

@AlexMaysonet

3 жыл бұрын

He has. You can find the video on his channel.

@Shoptoolreviews

3 жыл бұрын

Yes, we have already reviewed these. kzread.info/dash/bejne/q3WAqM2DqpPPg9Y.html

@Shoptoolreviews

3 жыл бұрын

thx

@atadali6199

3 жыл бұрын

@@AlexMaysonet thnx, buddy

@atadali6199

3 жыл бұрын

@@Shoptoolreviews well, great

If it takes less force to break it free then it should be 80% of 300 ft lbs of breakaway force also

@Shoptoolreviews

3 жыл бұрын

No, it doesn't. To be honest, this is why there SHOULD be standards for measuring torque for impact wrenches, but there is not. When tool companies claim "300 ft-lbs of breakaway torque", they mean that a bolt can be tightened to 300 ft-lbs and their impact can break it free. Thanks for watching.

درود بر شما متشکرم

@Shoptoolreviews

Жыл бұрын

Thanks for watching.

Are you planning on reviewing the 1/2 Kobalt XTR 24-Volt Max Variable Speed Brushless Drive Cordless Impact Wrench (1-Battery Included) Item #1518745Model #KXIW 1424A-03

@Shoptoolreviews

3 жыл бұрын

We may do this soon. Thanks for watching.

So don't get the milwaukee and get this?

@Shoptoolreviews

3 жыл бұрын

Your call. They're both great impacts. Thanks for watching.

Why would you test the milwaukee with a 1.5-2ah battery but do kobalt testing with a 5ah battery? Its a tool review channel, it’s suppose to help us make the right purchases given close to equal parameters

@Shoptoolreviews

3 жыл бұрын

If you watch and listen to our videos, then we explain this. We tested the Milwaukee M12 right angle with the 2Ah M12 battery because that is what the tool comes with if you buy the kit. The Kobalt does not come as a kit, so we had our choice of batteries. This was a 4Ah Kobalt 24V battery (Not 5Ah). We try to be very fair with our testing and provide tests with tools as our viewers may purchase and use them. We will have a follow-up video showing the M12 with a larger capacity battery. Thanks for watching.

@jerrelCbanks

3 жыл бұрын

@@Shoptoolreviews if you havent already done the follow up video. I'd be interested to see the comparison with the 6.0 XC battery.

It sounds like Kobalt is going to under rate these tools, as it gives the consumer a bit more than they advertise. This is a win win for the consumer.

"Tight spaces" 🤔😂

@Shoptoolreviews

3 жыл бұрын

;) Thanks for watching.

That thing seems huge! A stubby m12 has more power and is literally half the size..

@Shoptoolreviews

3 жыл бұрын

But this will reach into many places that a Stubby will not. Thanks for watching.

Would, LIKE TO NAME OF UR BIG CORDLESS TRUQE TOOL

@Kaane1221

3 жыл бұрын

Hytorc Lion Gun, very pricy. www.reasontekstore.com/products/lion-gun

@Shoptoolreviews

3 жыл бұрын

HYTORC Lion Gun. We reviewed them and the link is below. Thanks for watching. kzread.info/dash/bejne/q3WAqM2DqpPPg9Y.html