Respect for the 3D CAD Models being made available!

@KNIPEXofficial

19 күн бұрын

We're really excited to see what you're going to do with it! 😃👏

@torpedohippo8493

19 күн бұрын

@@KNIPEXofficial since you replied, do you know why the nordic version of cable cutters are not on your website?

@KNIPEXofficial

19 күн бұрын

Hi @torpedohippo8493, thanks for your feedback. Please tell us where you are from so we can give you the right customer service. Thank you.

@torpedohippo8493

19 күн бұрын

@@KNIPEXofficial Located in Denmark.

@KNIPEXofficial

19 күн бұрын

Hi @torpedohippo8493, for more information please contact: HJS Værktøj A/S Per O. Rasmussen Marielundvej 17 2730 Herlev Denmark E-Mail: hjs@hjs.dk Tel: + 45 44 84 40 44 Fax: + 45 44 84 08 84

I did not expect Thomas to show up in this video! Great to see this collaboration. My only problem with KnipeXTEND is that I now want to buy a bunch of new pliers. 😅

@KNIPEXDeutschland

18 күн бұрын

@jdl3408 Thanks for your feedback!

@KNIPEXofficial

18 күн бұрын

Hi @jdl3408, yeah Thomas is awesome! He's doing a great job, and we're so happy he agreed to be part of the KNIPEXupdate! 😃👏

When I'm at the flea markets, I always look for an old Knipex tools. And when I'm in a hardware stores, I always look for a brand new Knipex tools. That's how good and top quality this company always is 10/10🌟 *Unbeatable* 🔝 🤜

Can you guys make a mini (6" / 150mm) pair of twin grips? Preferably with a slightly smaller notch at the tip.

@KNIPEXofficial

19 күн бұрын

Hi @spevakdesigns, cool idea. We'll check it out. 😎

@GregoryVeizades

19 күн бұрын

​@@KNIPEXofficialSeconding this request!

@ruben2175

18 күн бұрын

yes, a smaller version would be a great addition to the others!

@gbay5250

17 күн бұрын

Maybe check out the engineer pz-32's. Ive got both, they dont have the dual pivot point but they are a lot smaller and have held up well

@darrencampbell8817

17 күн бұрын

For sure! I've been wanting mini 5" (125mm) Twin Grips since Doc from LastBestTool proposed the idea a few years back!

Very interesting! I would make opening springs with a locking feature for my pliers. Imagine tools getting even more modular and being able to create your own tools like Legos for adults 😂

I just have to buy a pair for supporting this german good engineering company 😍

The 3D Printing of specialized equipment for the Best Pliers is now super easy. Great Job Knipex 👍 Maybe a tray for some crimping dies or ferules on the Plier are now possible. Or a worklight for dark environments.

Great innovations.Knipex is a trendsetter in the field of pliers. The best pliers in the world💪

Great job Knipex, don't forget about the smaller 5 inch Twin Grip, every tool deserves the 5 inch, button lock version

I love all my Knipex tools they make all my tasks much more enjoyable to use ,and please never give up quality by sending manufacturing to China the quantity will go down very fast if that happens, Im just a home user but im very happy to pay more for very quality tools.

@akoznasovajusername

19 күн бұрын

Yes. The company's reputation will then start to degrade rapidly. It happened to many other big companies, unfortunately.. But I think Knipex will stay loyal to their homeland production.

_Perfect update and if this X piece of plastic was a GPS tag it would be more Perfect_

Браво! Абсолютно полезно! Благодарности за усилията, които влагате в продуктите си! Затова сте № 1.

I love it, especially that you’re essentially opening up to the community, allowing them to be creative with your products. This approach is genius for expanding your brand’s recognition. Is there any chance we’ll see comfort grips on the 125mm Cobra and the 8603125 at some point?

@KNIPEXofficial

10 күн бұрын

Hi @timkeller687, our aim is to convert all red-blue two-component handles first before we embark on the next major handle project. But stay tuned and keep an eye on our channels.

The comfort grip is by far my favorite.

Put it on the minis next so we can put keyrings

@KNIPEXofficial

19 күн бұрын

That's a cool idea. 😎😎

@geoliv3424

19 күн бұрын

The time has come for the knipex multitool😊😊

@urjnlegend

19 күн бұрын

​@geoliv3424 they need to do get with me for the design, I know exactly what they need @Knipex

Thomas! Great to see you!

I will comment in Japanese. 　色での識別、落下防止アイレット、栓抜きは絶対欲しい 新しいコンフォートハンドル、テープも装着できる素晴らしい製品ですね。 楽しく拝見させて頂きました。

I like the new design

I really like that belt clip idea. I'll have to pick up the twin force cutters with the new handles when available. I'd carry those every day.

Would love to add a small set of pliers to the Knipex family with a split ring tooth on the end. The addition of a lanyard attach point and a cutting edge near the pivot would be stellar! It would take prized possession in my fishing tackle box ! There is a significant crossover wherever I’ve been of trades people and fishers…. And nothing else on the market is anywhere near as good as my Knipex tools.

Toms the best I love the belt clip Idea.

Excellent design

Pretty interesting idea. Thanks for the update 👍

@darrencampbell8817

17 күн бұрын

Morgan! Not surprised to see you on here. Looks like me and a few others are trying to get these guys to make us some mini Twin Grips...

@MORGANSMaintenance

16 күн бұрын

@@darrencampbell8817 yeah, the three other new tools they introduced recently aren’t real “needs” for me… but hopefully they come out with some more stuff. These handles are a pretty neat idea though.

Now that's a simple innovation that is so sensible, looking forward to getting some of these new handles.

That is actually a cool and useful little idea.

A KnipeXtend clip to hold the handles from spreading when not in use and out of the way when being used. It will be a while before I replace my many existing Knipex Comfort Grip tools, but I look forward to purchasing anything new with the new grip.

Great video, especially the 3d printing inserts

Wow thats awesome. Glad to see knipex coming up with new ideas !

I'm a use knipex tools at my work and i can say they are one of the best tools i've ever used but those 3d printed accesories 🤯🤯🤯 boom...amazing.

Such an innovative brand! 👏 Can’t wait to try it hands on.

Knipex are the best there are

Great...now I have to slowly switch my pliers over for the new handles lol the tether connection is one of the better looking ones out there

I'm starting to collect Knipex!

Knipextend is actually so clever, well done

Great tools, this new handle is great. I'll wait for the VDE version. A little non contact voltage detector accessory attached to the handle would be nice. Not a new idea, but it's a possibility. I'm already using the new ratcheting cable knife, great tool. Waiting for new updates. 👍👍👍👍

I'm looking forward to this video!

Very cool. Good job, Knipex, as always 👍

I can't think of anything that needed improving on the 2-component grip, but I guess I'll see what's coming.

@dennisfabian2570

19 күн бұрын

Would love a grip set between comfort and “utilitarian”

awesome and great presentation ❤

Thank you

Very nice. Look awesome, can’t wait to get mine.

This is fantastic

To me , it’s all about ergonomics and metallurgy, top notch feel and toughness, this is why I buy Knipex.

Many thanks for this news. I love my Cobra 125 as a tool to carry around. I can only think of one way to improve it and the Cobra family. Add a socket for 1/4" or 4 mm screw driver bits. It could also serve as a lanyard hole.

from japan. 楽しみにしています。

@KNIPEXofficial

24 күн бұрын

😀🙌

This is awesome. All of my knipex tools are comfort grip. Looks like i gotta get a whole new set of everything. Im fucking PUMPED

The one thing missing from the Knipex lineup, are a non insulated screwdriver range. If you only carry insulated drivers, they tend to get used as hammers/chisels etc. By having both, you eliminate the dangers of your insulated drivers getting damaged and thus compromised. Wera have a good range, plenty of mechanical engineers like myself would buy a Knipex version. The green/black Wera drivers are extremely popular, and engineers like myself would buy both Knipex sets. PS The plain red handles are my favourite, as you said, so easy to keep clean. 👍

Aguardando.....

Please make a smaller TwinGrip! I love these pliers, and bought a pair as soon as it came out, but I would love a shorter (maybe 6") version! We've been asking for years, and every Knipex Update I keep expecting to see it, and getting disappointed.. These new handles seem great, but a smaller TwinGrip is what we really want!

Need comfort grip Raptors!

When will start to selling KNIPEXTEND series products to TAIWAN ? 🎉🎉🎉 I can’t wait❤❤❤

@KNIPEXofficial

18 күн бұрын

Hi @TimCaHsieh, for more information please contact: Aaima International Co. Ltd. Jonnex Mao 6F-4, No. 1, Sec. 1 Fu-Shin S. Road Taipei, Taiwan E-Mail: aaima.tpe@msa.hinet.net Tel: + 886 2 27 75 20 70 Fax: + 886 2 27 77 23 63 Best regards from Germany KNIPEX Social Media Team

I would like to see a small blinking LED to locate tools in dark work environments.

@SteveOnStar

18 күн бұрын

Or even just 3D printing some of the identifying tabs on glow in the dark material

@KNIPEXofficial

18 күн бұрын

Hi @SteveOnStar, yes exactly. At one of our exhibitions, we had glow-in-the-dark ColorCode Clips. They worked great!

@DC9V

17 күн бұрын

Hmm, what is that in the air? Do I smell a collaboration with Victorinox?

Personally I prefer one-component handles like the 77 11 115 has. The removable tool clip is pretty cool, though.

❤️

Can you please do the same for VDE, me and my colleague use the same pliers and cutters and he’s always pinching mine, also a retro fit spring like the ones on the flush cuts could be a good upgrade using these new grips

@KNIPEXofficial

18 күн бұрын

Hi @minitom7772, our aim is to convert all red-blue two-component handles first before we embark on the next major handle project.

I’m assuming this new handle design will eventually make its way to the VDE insulated handles 😍😍

@KNIPEXofficial

4 күн бұрын

Hi @johnmaguire7823, our aim is to convert all red-blue two-component handles first before we embark on the next major handle project. But stay tuned and keep an eye on our channels.

Great idea. BTW, tiny little metal fork attached to a parit of pliers in an epitome of German sense of humour.

Müsste mir eigentlich nochmal mein jetziges Sortiment in neu holen. Die Features sind mega.

@KNIPEXofficial

19 күн бұрын

Hi @randolflp8626, vielen Dank für die lieben Worte. 🙂👍

How about a trade in program.?

Please bring plastic coated handles to the chrome plated pliers such as combination pliers, forged strippers, or linesman pliers

I'm going to need another plier drawer 😂

If you made a version of the forged wire strippers that has the same needle nose style head as the installation pliers and can strip up to 22awg wire with the textured dipped grips from the cobra you’d have an absolute winner. But if I can’t have that then please for the love of god make the textured dip grips available on all pliers.

Werden die VDE-geprüften Zangen für Elektroarbeiten auch mit den neuen Griffe mit dem KnipeXtend-Feature ausgestattet? Das wäre sowohl für die Nutzung der Absturzsicherung, als auch zur Werkzeugmarkierung äußerst praktisch.

@KNIPEXofficial

19 күн бұрын

Hi, vielen Dank für Deine Frage. Unser Ziel ist es, zunächst alle rot-blauen Zwei-Komponenten-Griffe umzustellen, bevor wir uns an ein nächstes großes Griffhüllenprojekt machen. Bleibe aber gern gespannt und behalte unsere Kanäle im Auge.

Tolles Video. Danke erstmal. Ich sammle alte Knipex Zangen und möchte gerne wissen wenn was erstellt wurde. Gibt es z.b. alte Kataloge die ich herunterladen kann ?

@KNIPEXofficial

19 күн бұрын

Hi @deSergeant1, wir bieten immer unseren aktuellen Hauptkatalog zum Download an auf www.knipex.de/service/downloads . Ausschnitte aus historischen Katalogen findest du auf www.knipex.de/unternehmen/unsere-geschichte .

ما زلت انتظر كماشة متعددة المهام مثل فيكتورينوكس وليذرمان

@fananderson3913

19 күн бұрын

I second this ^

You could update the wooden presenters 😁

When will the new comfort grip be available to order online? Tried looking on several websites for the Knipextend but did not see them. I am looking forward to purchasing the entire line up of tools over time! Great video!

@KNIPEXofficial

16 күн бұрын

Hi @Pvtvkvev, please tell us where you are from. So we can give you the right contact info. Thank you.

@Pvtvkvev

16 күн бұрын

@@KNIPEXofficialI am from Milwaukee, WI. United States

@KNIPEXofficial

13 күн бұрын

Hi @Pvtvkvev, please contact our colleagues from the US at KNIPEX Tools LP under customer-service@knipex-tools.com . Best regards from Germany KNIPEX Social Media Team

13:13 make carbide glass breaker

@KNIPEXofficial

19 күн бұрын

Hi @VALERYAN581, also a great idea!

Will these be available to replace my current grips?

@KNIPEXofficial

18 күн бұрын

Hi @adamgrove9198, where are you from?

What are the first pliers offered with the new comfort handles?

@KNIPEXofficial

18 күн бұрын

@kleung347 All products that previously had our familiar red and blue two-component handles will gradually be upgraded to the new three-component handles. Only our electronic pliers are not affected.

Could you please make a duck bill version of your long reach needle nose pliers ( 28 71 280). I am currently using the Mac tools version P11LRDBA for long reach duck bill plier and I know if Knipex made one it would be epic. Great update and I look forward to see what further innovations Knipex comes out with in the future.

@KNIPEXofficial

18 күн бұрын

Hi @ErikJones-kf1kg, thanks for your feedback! We will pass this on to our product development department.

Is there a vde version?

@KNIPEXofficial

13 күн бұрын

Hi @Rahul-gl3wc, our aim is to convert all red-blue two-component handles first before we embark on the next major handle project. But stay tuned and keep an eye on our channels.

I would like to see a video about the two different 1000V VDE handles. Especially the double dipped one, because its naerly impossible to find any information about it. What are its (dis-) advantages compared to the 2 component 1000V VDE handle?

@KNIPEXofficial

18 күн бұрын

Which other VDE handles do you mean? Our VDE handles are the red-yellow ones. 🙂

@bwfreak1191

13 күн бұрын

The double dipped ones^^ you offer them on your website. I tried linking to a product (on your website), but apparently that's not allowed...

Would've been cool if those plugs were left blank so we can use a custom mini hot brand instead

@KNIPEXofficial

19 күн бұрын

You can download the print data for the KNIPEXtend interface and customize it yourself. Just click here: www.knipex.com/comfort-grip/

@SteveOnStar

18 күн бұрын

​@@KNIPEXofficialis there any chance the plugs will be offered in a luminous material too?

How do I get the Cobras with smooth shiny plastic coated handles?

@KNIPEXofficial

13 күн бұрын

Hi @non7top, how about our KNIPEX Cobra® 87 03 250.

@non7top

13 күн бұрын

@@KNIPEXofficial from the images it looks it still has same rough cobra coatings. Not the plier smooth coatings.

@KNIPEXofficial

13 күн бұрын

Hi @non7top, please check this link for an overview of all Cobra variants: www.knipex.com/search?keys=cobra . 🙂👍

@non7top

13 күн бұрын

@@KNIPEXofficial yeah, would be nice to have cobras with smooth and shiny coating on handles. Not the rough one.

Expect chrome plating in future products I love the SmartGrip but it's not chrome

🇩🇪

Как обстоят дела с поставкой в Россию?

Hey @MadeWithLayers pretty awesome cameo!

Make strippers that cut 22 awg stranded wire please😢

Shut up and take my money 💰💰

Kurrła nie wyrobie, całe piniondze na knipeksa wydam. Kto to widzioł.

为什么要插片，还要额外增重？其实Knipex只要在手柄尾巴上开个孔，支持不同颜色的绑绳，基本也就等同于这次创新了!答案是，创新是噱头，卖插片赚钱才是真的。 Why do we need the color inserts？It just add extra weight. Actually, Knipex just needs to dig a small hole in the tail of the plier handle, to support different colors of lanyards, and that would basically be the same as this innovation! The answer is，Innovation is a gimmick, selling color insert is real business.

Just bought a full set of tetheted tools. I want to die.

ℹ️

A beautiful woman always makes everything brighter !

Honestly, don't feel happy about it. Seems like overengineering, like doing something for the sake of doing something, not for the real reason. Guess I will switch to 01 handles from now on.

@airmobiledivision7759

19 күн бұрын

Over-engineering is what the Germans are know for, after all.

Calling a extra piece calling an extra piece of overmoulding the „Highlight“ and a „Milestone“ Is in my opinion a loss of credibility on the side of Knipex.

_Perfect update and if this X piece of plastic was a GPS tag it would be more Perfect_

@jdl3408

18 күн бұрын

GPS would be tough but something like an Apple AirTag might be possible. This is a great idea for “where did I leave my pliers on this massive job site”