I love these little pliers. They are EDC for me most days in combo with a SAK, when a large multi tool is too much, which is most days.

Great demo. I have the Cobra XS and love them. Now I'm going to get the Pliers Wrench. It will be a good partnership.

Great review,thanks from New Zealand, just ordered one.

@kenzothiazepine

2 жыл бұрын

Congrats. You'd love it. I now prefer this to the 125mm. Thanks for the comment 🙏

@avrenna

2 жыл бұрын

@@kenzothiazepine Thanks for the great video and follow-up with your preference. I have the 250mm cobra and pliers wrench. For EDC I've been torn between 100 and 125. You're the third person I've seen who prefers the XS design, and that's the last bit of assurance I needed before purchase. Thanks again!

I have a set of 180 mm for work around the house and may add a set of 100 for smaller tasks.

That background music is like watching 80’s film😊

I just got the 150 pliers wrench with the 125 cobras, with the basically free pouch, which I plan to put both pliers in my 7 in belt pouch, for when I am going on long bike rides or long motorcycle rides. I keep first aid stuff and a few other tools in the pouch currently, so I think these additional pliers with my Leatherman will help me overcome most things that could go wrong. I have been looking at all the different sizes and I think the 6 inch ones would help me the most with my plumbing side work and with bicycle and motorcycle maintenance and repairs. I still might get these smaller ones for pocket carry, or just carry the 125 cobras in my pocket. It's awesome that such a small tool could undo a axle nut on a bicycle. Thanks for the video.

@danbarb9728

8 ай бұрын

I would say the 250 is the standard size according to Knipex. I dont have such a tool yet and plan to buy only one, so i think the 250 is the correct size for me for most situations at home.

@Spanky8402

8 ай бұрын

@danbarb9728 yeah, the smaller ones won't grab onto drain pipes but I got the smaller ones to carry with me and the smaller ones are awesome for getting into the tight spots for faucet replacement though. I have bigger 7 inch and 12 inch pliers for bigger pipes and I mostly wanted some smaller pliers for bicycle riding and tough, tight situations that I am always dealing with.

20-25 Nm comfortably by hand. I added a 150mm stainless steel extension bar and achieved 95 Nm, starts to cam out after this.

great demo, thanks

Thanks dude It looks awesome, I’m sure gloves or improvised cheater bars would help crank it up a bit👍

Great review 👍🏽

1st time seeing this tool which had a mention in Google news. Wanted to check out and your review/video convinced me I need this tool. Thank you

They are excellent and have displaced my little 100mm Bahco adjustable from my go to tool bag. But they may as well be made of unobtanium, they are extremely difficult to source in the UK and the prices are hiked way high, I've seen up to over £75. So if you want one I suggest waiting til the price comes down to reasonable levels. As for the bigger ones Knipex have hinted that the buttonless mechanism is going to find its way onto those too.

Nice demo, I think a small piece of tubing / extension on the one handle would also help!

I put a heat-shrink tube on the 100 handle for convenience and protection, and also hung a lanyard.

I just got both 4” pliers and wrench. I’m trying to get them sorted into a little belt pack. Supplements for the Leatherman.

Simple and adequate for the purpose

Very nice!

Great test, thanks…! But you didn’t test the cobra xs mini…? 15 mm rear axle bolts are one major requirement for me…. Despite the popularity of fixies, it’s bizarre that there’s almost no 15mm wrenches out there…. I have a Pedro’s, but it’s a one trick pony….

Great!

Is the bike a surly steamroller?

How about the cobra? It seems more versatile and also has flat edges to grip a hex nut. I'm a little worried about rounding the bolt, but it seems like the ridges wouldn't make a lot of contact with the bolt

@qooxxp

Жыл бұрын

@sauliluolajan-mikkola620

@danbarb9728

8 ай бұрын

The Cobra is a tube plier, thats how we call it here in germany, its made for tubes only, thats why it has the teeths. The tool in this video is for hex nut, the cobra would rounden a hex nut over time. I have more use in such a hex tool compared to a tube plier.

@Healcraft

6 ай бұрын

​@@danbarb9728cobra good for already rounded nuts too

👍

In fact, it can undo a 80Nm nut, some one has tried, just add an cheater bar.

The guy has a caliper and he's guessing how much thinner is the tip of the xs compared to the 125 mmm? 😂

do you like that torque wrench?

@kenzothiazepine

2 жыл бұрын

I love it. Warren and Brown Deflecting Beam torque wrench 👍

Are they thin enough to disassemble a wheel hub? As usually, it requires a special wrench.

@kenzothiazepine

14 күн бұрын

@@vladimirkirillovskiy8056 I can't be certain but I don't think it's thin enough

@vladimirkirillovskiy8056

14 күн бұрын

@@kenzothiazepine got it, thank you

11.27.21 ws c13 hood gls nk guerra

Now get the xl version

Can put a cheater on the handle and it still wouldn’t slip

The review is perfect, except the penetrating music...I had to mute the sound and switch on subtitles.

Those small ones are not worth the money, and compared to the normal size ones, they are useless

@PhreakDarkSoul

2 жыл бұрын

Those small ones are worth the money if it comes to weight and size limitations. No one buys such a tiny tool for regular usage. I also have a few Leaterman tools, but they are only in case of "emergency", e. g. during holiday. They all find a nice place in my car, together with other portable tools like the Wiha System 6 281T11 screwdriver set (for screws that can not be reached or do not fit to the Leatherman or any similar multi tool). It is always better to have compact tools, which are a little bit harder to use, instead of having no tools at all with you. A set of Knipex XS Wrench and Cobra pliers, combined with any not to small Leatherman multi tool and a screwdriver set like the above mentioned Wiha set will save your day for sure. For me they are all worth the money and far away from useless. And yes, I used my Leatherman Juice XE6 a lot in such situations already.

@urjnlegend

2 жыл бұрын

They are def worth the money, a pleasure to use and carry

@j.d.mandrell5985

2 жыл бұрын

You literally just watched him use it, genius......

@NoNo-uy2bq

2 жыл бұрын

They’re actually very useful, I’ve use them working on my motorbike and Mountain bike and they perform beautifully

@matthoffman6962

Жыл бұрын

Seems very small to get any real good usage out of them. I’d probably go the 5inch at least.

Jesuscrist loves you, repent of your sins, and have forgiven of your sins in His Name