Those metal protectors actually look way better than I was expecting!

Fred, you are a Great fan of 360 & very meticulous owner indeed👍🏼

@fredphua

2 жыл бұрын

Thank you Keith. Just my way of making the ownership process more fun and making more like-minded hobbyist friends along the way. :D

When I bought my Lightweight Brompton, (the original folding bike), it had some tape which by only a few times use, had been worn through and had become useless! So I ordered some carbon shells like yours, to make it better, and they have functioned til now. I have also sown some leather on its frame, as up its stem post. Your colleague, Chris by bike, complains that if she washes her bike the leather will become vet, and I didn't think about that, but some plastic and tape may prevent that. Also it is possible to buy a leather using velcro.

thanks fred!!

U take good care of your 360 bike

Very good review of the 360. Can advise where did u get the BB protection and also the rear chain stay protector. Many thanks 😊

@fredphua

2 жыл бұрын

Thank you Neville. I got mine at Jet Cycle along Changi. But they are easily available online(aliexpress, shopee, lazada etc) as well, might want to check it out. Cheers.

thanks for sharing your mods on 360. are you planning to change your shifters and brake levers? hope you are! looking forward to it

@fredphua

2 жыл бұрын

Thank you for dropping by Rori. Ahh.. I have really been contemplating. But not sure if I should rebuild another one or just do it on this 360. Will definitely make a vid on either project! 😉👍

Fred, I like your new seat and handle grips, where you bought them pls?

@fredphua

2 жыл бұрын

Hey William, thank you for the compliment. I bought the saddle in Hello Bicycle near bugis and the grips from AM Cycle. Might want to check them out (oh also find ur correct saddle width before buying, made a vid on this) and happy hunting! 😉👍

Could you share in the order of priority the upgrades you have made so far? Could you also share briefly how you maintain your 360? E.g. do you clean after each ride, how often you clean, change grease etc?

@fredphua

2 жыл бұрын

Hey KS thanks for the comment. For upgrades, really whatever comes to mind man. For maintenance, I just do a basic wipe down with some soap water after rides. Making sure all the contact points are clean especially during this pandemic. Maybe once a month I'll clean it more thoroughly and use dry lube on the chains after I wash it. Oh.. and new installations will mostly be lined with some lithium grease on the screws too... afraid of jams. Haha

@kc-st

2 жыл бұрын

@@fredphua alright thanks much! Your channel has nice info on the 360. I just bought one and found what you are sharing to be really helpful. Thanks!

@fredphua

2 жыл бұрын

@@kc-st appreciate it KS and congratulations on your new bike! Your question is a good one, maybe I'll plan to collaborate with some bike shop owners to share some tips normal hobbyists like us could use to maintain our bikes. Will keep that in mind. Meanwhile, ride safe and enjoy the miles! 😉👍

Are you using the short or long brooks grip? Which is more suitable for the 3sixty m bar? Thanks.

@fredphua

2 жыл бұрын

Hey David , I'm using the 100mm ones in this pic. It's suited for the stock bar because of the curvature, but if u change to bars that are longer, u may be able to use 130mm. Hope this is helpful.

Hi Fred , can I check you where you get the ston guard protective film

@fredphua

2 жыл бұрын

Hey Francis, I got mine from Jet Cycle along changi. Google them and you'll find them. I think there are some pre cut ones available online, so there's no need for you to cut them. Save a step. Just suggesting, hope it helps. 😉

Scuff it with 3M scrubbing wool to remove the shinny finish.

Interesting, where did you pickup your paint projector’s?

@fredphua

2 жыл бұрын

Hey William, I got it at a shop locally but they are available in most ecommerce platforms. Might want to give aliexpress or amazon a shot?

Hi Fred, great video. May i know where u got the film protector. Or how do i search that via shopee/taobao

@fredphua

2 жыл бұрын

Thank you Byron. I got mine from JetCycle along changi. I didnt deliberately go there to buy it, rather chanced upon it and just grabbed it. Lots of other foldie stuff there, can consider dropping by. 😉👍

@user-jc9nm5sh3y

2 жыл бұрын

@@fredphua 能给个具体地址吗？谢谢

@fredphua

2 жыл бұрын

@@user-jc9nm5sh3y 请问你是指买保护膜的地址吗?

@user-jc9nm5sh3y

2 жыл бұрын

@@fredphua 对啊！或专卖跟小布相关的东西的地址也行啊！谢了

@fredphua

2 жыл бұрын

@@user-jc9nm5sh3y 我买保护膜的地址是在148 Changi Road . 这个地方不是专卖小布零件的地方，不过很多折叠车用品供你选购。

3:51 is what Brompton calls a Cable Fender Disc. It's not to protect your fork but your front brake cable, to prevent it from rubbing against the front wheel on Bromptons (or copies) that are not fitted with front mudguards. It is redundant for your bike.

@fredphua

2 жыл бұрын

I wouldn't be too bothered with the naming conventions but it's good info, thanks for that. Seems like in my case it found new purpose other than the intended use! Cool info though. Cheers.

@bungee28

2 жыл бұрын

@@fredphua I could care less about the naming convention. Just wanted to inform you what that part was designed for on Bromptons without fitted fenders (S-series). If you just want to prevent your fender from cable rub, a simple frame sticker would suffice. The original accessory from which this was copied is meant to hold the brake cable a distance away from the spinning front wheel, a much more important protection for the rider than to keep your front fork looking pristine..

@fredphua

2 жыл бұрын

@@bungee28 thanks much, the information is useful. I guess I'll stick with this rather than a sticker though. 😉👍

Hi Fred, do u have the video on your changed handled grab n seat?

@fredphua

2 жыл бұрын

Hey Georgina, I had it as my review for my grips and saddle but removed it for some personal reasons. Maybe in due course, I'll edit the video and release one focusing only on the install/removal of grips & seat. Appreciate the interest!

Where can I buy the metal bottom bracket protector? Thanks!

@fredphua

Жыл бұрын

Hey, sorry I forgot the exact link. But these are commonly available, might want to try major e-commerce platforms like lazada/aliexpress etc?

Can you share where you got your knick knacks from?

@fredphua

2 жыл бұрын

Hey Christopher, apologies. I no longer recall the exact sites I gotten them. But they are all easily available from major ecommerce platforms (aliexpress, lazada etc.).

Where did u get the protectr film?

@fredphua

2 жыл бұрын

Hey, Jet Cycle at changi if you are in Singapore. If not there are many online options.

Is that a brompton or a 3sixty bike?

@fredphua

2 жыл бұрын

Hey, it's a 3Sixty. Sorry to hear about your earlier encounter.

Someone sell me "brompton bike" after a week of using it i notice that theres something wrong with the frame.. then i realized it is not a real brompton frame.. its a 3sixty frame then just stick a brompton sticker to make it look like a brompton.. hayss

@fredphua

2 жыл бұрын

Sorry to hear about your encounter. Hope you didn't fork out a lot of funds for it.

@pogingpanot8867

2 жыл бұрын

@@fredphua its not that much.. its a fair price but its a waste of money ($6,000 hongkong dollar).. but so dissapointed as newbie using a brompton.. anyway its a lesson by experienced.. now planning to buy a real brompton soon..

@fredphua

2 жыл бұрын

@@pogingpanot8867 cool cool, hope you will enjoy your ride the time being and look forward to the future miles on a B. 😁👍

Fake brompton

@Ammotyr

2 жыл бұрын

LOL ... its not Brompton - its a 3sixty.

@iacobusalemannicus3631

2 жыл бұрын

@@Ammotyr which is a BROMPTON knockoff/counterfeit.

@pogingpanot8867

2 жыл бұрын

Someone sell me "brompton bike" after a week of using it i notice that theres something wrong with the frame.. then i realized it is not a real brompton frame.. its a 3sixty frame then just stick a brompton sticker to make it look like a brompton.. hayss