Right on bud…I’m about to get a klx hyped for it

@FullSpeedImpulse

Жыл бұрын

Sweet!!! They are awesome bikes. Depend on what you are doing but the 140s are sweet rigs too

Great video

@FullSpeedImpulse

Жыл бұрын

Thanks!

Taco bell sign is legit

@FullSpeedImpulse

Жыл бұрын

Thanks!!! I’ll have to light her up in one of my next videos I do.

How do you get the exhaust tip off

@FullSpeedImpulse

Жыл бұрын

Are you talking about the tip as in undoing the bolts to slip it out the end or the actual small little tip that I used a drill with a step bit to get out

How's this setup holding up?

@FullSpeedImpulse

11 ай бұрын

We sold the bike. But before we did we ripped it for about a hour. Everything seemed like it was holding up and honestly I don’t think there is much to fail. Should hold up for awhile. Just plug the exhaust to keep water out to prolong the life of your packing inside

If I do the exhaust mode, and airbox mod, do you need a bigger jets ind the carb?

@FullSpeedImpulse

Жыл бұрын

Yep 👍

@mathiasmarkedal9736

Жыл бұрын

@@FullSpeedImpulse what jets sizes do you think ? It 2020 model

@FullSpeedImpulse

Жыл бұрын

I’d start with a 40 pilot and 90 main. Your elevation isn’t crazy high is it?

@mathiasmarkedal9736

Жыл бұрын

@@FullSpeedImpulse the avengers elevation is 30meter ( 100 feet) over Sea level😅

@FullSpeedImpulse

Жыл бұрын

Ooo yea your good. Try those and see if they work.

If i just do a airbox mod can i keep Same jets if i do and i need to what will happen?

@FullSpeedImpulse

8 ай бұрын

Think of it like this. If you did your airbox mod and you didn’t need to rejet. That means you did not make any performance difference by doing the mod. More air you have, the more fuel you will need. If you didn’t rejet it would prolly become a little harder starting and prolly get some popping out of your exhaust.

@FullSpeedImpulse

8 ай бұрын

We will actually be starting a klx110 build here before Christmas. So stay tuned!!!

@PaulSingletonTN

6 ай бұрын

Could you just cut out the spark arrestor on the inside and leave the factory tip to get rid of the flow restriction?

@FullSpeedImpulse

6 ай бұрын

@PaulSingletonTN You could. And that’s what most people do. But it only frees it up a little bit. There is still plenty more restriction.

Too bad I don't have a welder☹️

@FullSpeedImpulse

Жыл бұрын

They can get expensive but a great investment in the long run. Took me awhile to get mine and now I don’t know I how I did stuff without it.

I did this and tbh I don’t recommend it

@FullSpeedImpulse

8 ай бұрын

It’s a good option for people that want to upgrade on a budget. But yes aftermarket exhaust is the way to go if your looking to spend money.