After a few years of having the Kitfox in a trailer, here is the setup that is working for me. Music from the CD Careless Whisper by the London Starlight Orchestra tracks 5, 7, 11 and 19.
Жүктеу.....
Пікірлер: 39
@joseruiz-Joecool3 жыл бұрын
Thanks for taking me flying! I enjoyed it!
@frankkilgore59402 жыл бұрын
Nice plane.....and music , very well done
@gparroz3288 Жыл бұрын
That is awesome. I didn’t know the Kitfox had a folding wing model. Great video
@jimsandoval7633
Жыл бұрын
All the Kitfox models fold the wings. I knew I could not afford a hangar so the folding wings was a must option for me.
@aaronblack52483 жыл бұрын
The video looks great!
@stratotramp6243 Жыл бұрын
Great stuff. Like a ritual of flight!
@eriseldacesena4732Ай бұрын
k padre armarlo y desarmarlo y guardarlo en el trailer kisiera comprar uno
@Dr.Reason Жыл бұрын
Wow, your whole setup looks very much like mine…. Except the droop-tip wings on my Kitfox 4 - 1200 won’t fit in the Hallmark trailer while mounted on the plane. Apparently I need a different trailer! Love your set up!
@jimsandoval7633
Жыл бұрын
The box of this trailer is 26'. Inside at the very end I have chairs, a table and a cabinet. I have about 2' of space at the end.
@Blackcloud_Garage2 жыл бұрын
Wing fold is such an awesome feature. Saves so much money not needing a hanger. Why do you have to drain the fuel though?
@jimsandoval7633
2 жыл бұрын
When you fold the wings back, the tip of the wings goes down, just over the elevator. The gas tank on the wings also tilts down with the wings and fuel will overflow over the gas cap if there is fuel in them.
@KitfoxPilot2 жыл бұрын
Nice video. How much gas can you have in the wing tanks when you fold them? I didn't realize you had to drain them to fold.
@jimsandoval7633
2 жыл бұрын
My guess is that more than 2 or 3 gallons will overflow. The other thing to consider is that the wing will hang from a bolt when folded and the weight of the fuel will try bend the wing down. So, it is a good practice to drain the tanks.
@SteelDogFab
Жыл бұрын
@@jimsandoval7633 I heard if you use a tail stand, to keep the wings level this isn’t an issue.
@veffos Жыл бұрын
Eu sou fã desse modelo que dobra as asas. Pena que aqui no Brasil não tem.
@AymanRacing4 ай бұрын
For a new Series 7, will there be a problem fitting the sti model into a trailer? I dont know if all the models have the same dimensions when folded. I am new to STOL.
@pratvel9992 Жыл бұрын
Awesome thanks for sharing Jim. Am new to stol world very much interested on same cost effective setup. May I know what specific aircraft model kit and trailer(if possible please provide details if any company customize like same). Also did you built aircraft from kit?
@toadman506
Жыл бұрын
The Aircraft is a Kitfox, Looks like an IV
@jimsandoval7633
Жыл бұрын
@@toadman506 Very good, this is a model IV. I did not build it but got it with only 37 hours of flight time. This trailer was originally made to haul custom cars to shows. It's 8' wide. I am new to STOL and fix wings also and enjoying it very much.
@toadman506
Жыл бұрын
@@jimsandoval7633 That're just really Great little Aircraft. Which plant is in yours???
@reisender8889 Жыл бұрын
Great set up, What’s the design of that siphon your using? I have been holding gas cans over my head like a caveman and feel so silly seeing you with this great set up
@jimsandoval7633
Жыл бұрын
I use a what we call a jiggler and you can get at Lowes for $13 www.lowes.com/pd/STAR-Water-Systems-Thermoplastic-Transfer-Pump/1000678107
@mmeyers1112 жыл бұрын
How long does this process take, from the time you open the trailer door until you start the airplane engine?
@jimsandoval7633
2 жыл бұрын
That takes 25 minutes. One thing to consider here is that before getting the plane back in the trailer, I always take the cowling off, check all the fluids and do a careful inspection, then put everything back in place so that next time that I fly, I know everything under the cowling is ready to go.
@maxcoygmail10 ай бұрын
Wow, thanks! Good video to explain how it is so easy with a Kitfox, I owned one 👍
@primoshunter9 ай бұрын
Do you think a 20' V nose trailer would be large enough? I'm currently trying to find the trailer without owning the plane yet lol
@AmeriMutt76 Жыл бұрын
I've been looking for better "wings folded width" numbers on the kitfox, another builder took measurements and posted ~110" for his width, not sure which model.. that seems ridiculous to me, having the width be so close to road legal but slightly over.. which model is yours, if you don't mind my asking?
@jimsandoval7633
Жыл бұрын
This is a model IV. The trailer outer width is 101.5" and the inner width is 97". I have 1.5" of space at each end so that would make the width of the wings to be 94".
@AmeriMutt76
Жыл бұрын
@Jim Sandoval thanks for the response Jim. Nice setup you've got there 👍
@riedjacobsen8620 Жыл бұрын
So if you don't need to move the camera every few minutes, how long to get set to fly? How long to fold up and put away?
@antonioiozzi91712 жыл бұрын
Wich engine do you have? HP?
@jimsandoval7633
Жыл бұрын
I had a Rotax 582 at the time, now it has a 912ULS
@mikephillips93112 жыл бұрын
What make of trailer is that? Thanks!
@jimsandoval7633
Жыл бұрын
The trailer is an old trailer made to haul cars, the box 26'. The person that build the plane also builds custom cars for shows and I got plane and trailer as a package.
@peterchase50462 жыл бұрын
what size trailer is that?
@jimsandoval7633
2 жыл бұрын
8" wide but the frame of the door is a thick as the walls are. If the door frame is thicker than the walls, the plane will not fit through.
@mattwoody10892 жыл бұрын
The kit for looks flimsy compared to just aircraft??
@abelnino38112 жыл бұрын
Could have been a beautiful video but you put it on fastfoward. A big NO 👎 NO
@gpaull2
Жыл бұрын
You can adjust the video speed in the settings if you want to watch it slower for some reason.
Пікірлер: 39
Thanks for taking me flying! I enjoyed it!
Nice plane.....and music , very well done
That is awesome. I didn’t know the Kitfox had a folding wing model. Great video
@jimsandoval7633
Жыл бұрын
All the Kitfox models fold the wings. I knew I could not afford a hangar so the folding wings was a must option for me.
The video looks great!
Great stuff. Like a ritual of flight!
k padre armarlo y desarmarlo y guardarlo en el trailer kisiera comprar uno
Wow, your whole setup looks very much like mine…. Except the droop-tip wings on my Kitfox 4 - 1200 won’t fit in the Hallmark trailer while mounted on the plane. Apparently I need a different trailer! Love your set up!
@jimsandoval7633
Жыл бұрын
The box of this trailer is 26'. Inside at the very end I have chairs, a table and a cabinet. I have about 2' of space at the end.
Wing fold is such an awesome feature. Saves so much money not needing a hanger. Why do you have to drain the fuel though?
@jimsandoval7633
2 жыл бұрын
When you fold the wings back, the tip of the wings goes down, just over the elevator. The gas tank on the wings also tilts down with the wings and fuel will overflow over the gas cap if there is fuel in them.
Nice video. How much gas can you have in the wing tanks when you fold them? I didn't realize you had to drain them to fold.
@jimsandoval7633
2 жыл бұрын
My guess is that more than 2 or 3 gallons will overflow. The other thing to consider is that the wing will hang from a bolt when folded and the weight of the fuel will try bend the wing down. So, it is a good practice to drain the tanks.
@SteelDogFab
Жыл бұрын
@@jimsandoval7633 I heard if you use a tail stand, to keep the wings level this isn’t an issue.
Eu sou fã desse modelo que dobra as asas. Pena que aqui no Brasil não tem.
For a new Series 7, will there be a problem fitting the sti model into a trailer? I dont know if all the models have the same dimensions when folded. I am new to STOL.
Awesome thanks for sharing Jim. Am new to stol world very much interested on same cost effective setup. May I know what specific aircraft model kit and trailer(if possible please provide details if any company customize like same). Also did you built aircraft from kit?
@toadman506
Жыл бұрын
The Aircraft is a Kitfox, Looks like an IV
@jimsandoval7633
Жыл бұрын
@@toadman506 Very good, this is a model IV. I did not build it but got it with only 37 hours of flight time. This trailer was originally made to haul custom cars to shows. It's 8' wide. I am new to STOL and fix wings also and enjoying it very much.
@toadman506
Жыл бұрын
@@jimsandoval7633 That're just really Great little Aircraft. Which plant is in yours???
Great set up, What’s the design of that siphon your using? I have been holding gas cans over my head like a caveman and feel so silly seeing you with this great set up
@jimsandoval7633
Жыл бұрын
I use a what we call a jiggler and you can get at Lowes for $13 www.lowes.com/pd/STAR-Water-Systems-Thermoplastic-Transfer-Pump/1000678107
How long does this process take, from the time you open the trailer door until you start the airplane engine?
@jimsandoval7633
2 жыл бұрын
That takes 25 minutes. One thing to consider here is that before getting the plane back in the trailer, I always take the cowling off, check all the fluids and do a careful inspection, then put everything back in place so that next time that I fly, I know everything under the cowling is ready to go.
Wow, thanks! Good video to explain how it is so easy with a Kitfox, I owned one 👍
Do you think a 20' V nose trailer would be large enough? I'm currently trying to find the trailer without owning the plane yet lol
I've been looking for better "wings folded width" numbers on the kitfox, another builder took measurements and posted ~110" for his width, not sure which model.. that seems ridiculous to me, having the width be so close to road legal but slightly over.. which model is yours, if you don't mind my asking?
@jimsandoval7633
Жыл бұрын
This is a model IV. The trailer outer width is 101.5" and the inner width is 97". I have 1.5" of space at each end so that would make the width of the wings to be 94".
@AmeriMutt76
Жыл бұрын
@Jim Sandoval thanks for the response Jim. Nice setup you've got there 👍
So if you don't need to move the camera every few minutes, how long to get set to fly? How long to fold up and put away?
Wich engine do you have? HP?
@jimsandoval7633
Жыл бұрын
I had a Rotax 582 at the time, now it has a 912ULS
What make of trailer is that? Thanks!
@jimsandoval7633
Жыл бұрын
The trailer is an old trailer made to haul cars, the box 26'. The person that build the plane also builds custom cars for shows and I got plane and trailer as a package.
what size trailer is that?
@jimsandoval7633
2 жыл бұрын
8" wide but the frame of the door is a thick as the walls are. If the door frame is thicker than the walls, the plane will not fit through.
The kit for looks flimsy compared to just aircraft??
Could have been a beautiful video but you put it on fastfoward. A big NO 👎 NO
@gpaull2
Жыл бұрын
You can adjust the video speed in the settings if you want to watch it slower for some reason.