cool build, for anyone that plans on doing one for their 110, if the throttle grip is like this, its way easier if you get a new throttle tube instead of having to cut away at the one thats glued on, saves so much time

That +5HP thing made my day🤣

Love your videos man ! I never new you only had 300 subs till I just checked ! Your Chanel is really good !

@snyderhaus

3 жыл бұрын

Thanks man, appreciate it! Yeah, slowly trickling up there haha

Sorry for the 720p quality, I figured I'd rip these and put them on as a single video! Enjoy! Please note; I'm sorry you think that washing with a plug is required. You should see how many years people have washed their bikes, ATV's, SXS etc without them, without ruining the engines.. And yes, you're right, it's not a "full" build, but, it is a full video fo the series that I had done. And sure, I could add a big bore kit, a bunch more stuff; this build wasn't finished. It's also not supposed to be an unrealistic build where you're pretty much just creating a super-mini or something. Everything done here is easily anyone can do to their machines with minimal work or money invested. Thanks for watching!

No joke you deserve like 1 mil subs keep up the work man 🤙

@snyderhaus

3 жыл бұрын

🙏 appreciate.

as an experienced rider i recommend getting an air compressor, they will come in handy, especially for taking grips off

20:43 went from a 110 to a 110L

@danksushi7417

9 ай бұрын

Still the same bike

LOVED THIs VIDEO PLZ MAKE MORE!!

@snyderhaus

3 жыл бұрын

Thanks. I’ll try!

@brodyturner8709

3 жыл бұрын

Nice can you do it to a Ktm 85cc.

Nice build. Yeah I hate riding in sand. Not my favorit thing to do. The KLXL 110 is a wheelie maschine though. Even straight stock it will come up in any gear!

@snyderhaus

3 жыл бұрын

Defintely! Unfortunately, it was the only place I had to try out the bike at the time lol Sketchy as heck, though.

One more mod I recommend is definitely a high compression piston it just gives it the boost it needs without being as crazy as a big bore kit

@snyderhaus

2 жыл бұрын

Great suggestion! I was actually just looking into big bore kits etc and debating on if they were worth it..

@sagenbabin8786

2 жыл бұрын

@@snyderhaus there a lot of fun I’ve got a 143 klx with a v2 and it is absolutely crazy especially for someone as small as I am it’s a lot of power. But you’ll have a perfect bike with either a high compression piston or a 134 the full build I a little bit to much without a cradle and upgraded suspension

I’m sure the wife is thrilled about the bike being in the house🤣

@snyderhaus

3 жыл бұрын

Haha hence the pre wash.. gives the perception that it is clean.. 😂

@holdenbostocky1998

3 жыл бұрын

@@snyderhaus Haha it does look pretty clean.

When putting on the pipe if you tighten the nut on the inside of the bend a little more then the other as you tighten both it makes it tighter and easier going

@snyderhaus

2 жыл бұрын

Duuude, thanks for this!

@broughttoideas

2 жыл бұрын

@@snyderhaus no problem

Sweet pitter

Lol had same pro taper grips on my bike stock Kwai grips are weird that u had to shave it off

awesome i like it😲😍😱

Who else saw the the exhaust guard is on upside down

@snyderhaus

3 жыл бұрын

Someone on the individual post of this video noticed; I was curious how many people would notice.. hahaha

@nicholascampbell4600

3 жыл бұрын

@@snyderhaus its all cool man, same functionality upside down

@austingreiner3155

3 жыл бұрын

And when you washed in the beginning I put so much water got into the pipe

@danny.3zz456

3 жыл бұрын

@@austingreiner3155 I mean he changed it out either way but he washed it but when putting on the exhaust all the dirt was still there

@sagenbabin8786

2 жыл бұрын

Shhhh don’t point it out your messing with my ocd

Keep your weight back and steer with the rear tire more in the sandy sections

@snyderhaus

3 жыл бұрын

Yeah, I am not a sand rider on a 110 by any means 😆

Awesome build though, i always go with jd jetting there kits come with everything you need.

@arabelysdelrosariomedina5872

3 жыл бұрын

😄😄😄😄😄😄😄😄

Very nice vid

@snyderhaus

2 жыл бұрын

Appreciated!

I love the build I’m looking to build my klx 110 do you have any suggestions for my first upgrade

@Atomized.

4 ай бұрын

Performance or looks?

Instead of you taking your throttle grip off by razor you can use sand papaer

@snyderhaus

3 жыл бұрын

I never thought of that! It would gum the sandpaper though, no?

@scorp1on138

3 жыл бұрын

Or u could use a razor 😂😂😂

I have a question. I have a 2021 klx110 and I am trying to decide if I should get a pro circuit t6 or a yoshi rs2. Which one do you like better??

@snyderhaus

3 жыл бұрын

It’s all preference and price point! I’ve heard the pro circuit is a super slick exhaust. The Yoshi seems overkill for my Application but hey, it was only thing available for me and worth at the time.

What did you have to adjust to get it running with the new air filter?

@snyderhaus

3 жыл бұрын

Air filter and exhaust require carb adjustments... it can run with the choke pulled out all the way, but not running as well. See other comment for what I did on the carb specifically

Bigger jets!

What throttle tube did you use. I am about to do pro taper bars and need to get one. Thanks!

@snyderhaus

2 жыл бұрын

Just the stock one!

lol i almsot drilled a hole in the bar for the damn kill switch but in my opinion it doesn’t matter that much lmao

I recently purchased a klx110l and I am having trouble with the carb do you have any suggestions on it.i don’t know much about the stock carbs I use a smart carbs on my 250 but I can’t figure out how to work the klx110l

@snyderhaus

3 жыл бұрын

If you purchased new or used that changes the variables.. or if you have anything on it like a muffler or any changes that will also mess with it and things that would have to be known. If it’s new from dealer talk to them. If it’s used then even cleaning the carb could be it. Otherwise, play around with the choke; does pulling the choke let it run better or worse? This will just give you a very small insight into what’s happening and then typically you can work from there. Hope this helps

@kynnedijace4599

3 жыл бұрын

@@snyderhaus I’ve cleaned it and it run but sputters

@snyderhaus

3 жыл бұрын

Any change when you pull choke?

@kynnedijace4599

3 жыл бұрын

@@snyderhaus nah

@snyderhaus

3 жыл бұрын

Okay; my suggest is to just make sure nothing else is an issue. They are pretty straight forward in terms of air fuel spark. If everything is stock it shouldn’t sputter much. Make sure fuel is high octane good fresh stuff, air filter clear and clean, and then a good spark. If those are all good make sure the carb is set to stock and then work out from there! Hope that helps.

What was the stuff that you spray to help get the grips on

@snyderhaus

3 жыл бұрын

Some good ol’ hair spray. (Put this on with grip glue and it’s perfect)

Honestly the stock exhaust sounds better from the back in my opinion

@snyderhaus

3 жыл бұрын

I think because the motor isn't running super well due to the huge increase in air flow, the sound characteristics have changed for the exhaust. I'll upload a video once I've jetted the carb! Without the exhaust on and just the pipe though, lmao it sounds insaneeeee!

@PearlyS10

3 жыл бұрын

Ok

@SJ_999

2 жыл бұрын

@@snyderhaus that and the aftermarket pipe is not much smaller

@Gnarlys_V-Twin

Жыл бұрын

@@PearlyS10 you sound pretentious because stock sounds way worse, if you can't afford an aftermarket exhaust just say that.

@PearlyS10

Жыл бұрын

@@Gnarlys_V-Twin who asked Lmfao💀. There was no need for that

What was that thing that adds 5hp called

love the bike but hate the sound of that new air filter

@snyderhaus

Жыл бұрын

I agree. It sounds horrible 😂

Will the XR 50 pro taper handlebars fit with stock cables?

@snyderhaus

Жыл бұрын

Definitely not; they are taller and you’ll want to replace the cables. You might make it work, but they’ll be tight and potentially pull on the throttle cable which I think is the biggest issue

What’s with that glue kawasaki uses on grips😮 every new model the same

I'M THE 260TH SUBSCRIBER

Sounds like it wants more gas. If you jet the carb it would be a lot faster and would be better for the engine since it now has a performance intake and exhaust

@snyderhaus

3 жыл бұрын

Yeah I have the jet sitting here just haven't had time unfortunately! Will be doing it shortly hopefully.

@Thatblacksierra

3 жыл бұрын

@@snyderhaus oh ok

what no horsepower increase with the new bars?

@snyderhaus

3 жыл бұрын

Haha you caught that.. 😂

sorry to see all the motorcycle experts in the comments, great video!

@snyderhaus

3 жыл бұрын

Thanks! I guess it’s “welcome to the internet!”

15:35 😂😂

bro this is so fresh how much did this all come to, because I'm thinking of doing this to my crf110 if you reply i will subscribe cheers

@snyderhaus

3 жыл бұрын

Depends, I'm Canadian so it's a little more 😂 I think the bars were about $150, the pipe was $500 and the pod filter $50 with taxes and import fees?

Why don’t the sell the 110L in the uk ? I’ve looked everywhere. P.s that sounds starved of fuel imo.

@snyderhaus

3 жыл бұрын

Ya this build isn't finished. I have the Jets to increase fuel. Haven't had a chance to get to the bikes and my 2020 300 built just yet!

@JohnnyApplepie

3 жыл бұрын

They come super lean from the factory so with the pipe and filter it must be dreadful

@snyderhaus

3 жыл бұрын

It's pretty bad with the filter and the exhaust for sure. I've got to find my jets and get those installed so I can see the difference and post a video for it!

Is the KLX the one with the electric starter.

@broughttoideas

3 жыл бұрын

Wow

Am I tripping or did you not have a clutch when you were riding?

@snyderhaus

3 жыл бұрын

You're trippin! just kidding. This is the KLX110, not 110L (I have both models)

@liners1996

3 жыл бұрын

@@snyderhaus it says 110L on it

@liners1996

3 жыл бұрын

@@snyderhaus but their is no clutch

@snyderhaus

3 жыл бұрын

I have both of the bikes, which were done with the same mods. I may have done some and filmed it on the one or the other.. so interpret it as you will, there’s two of them in there

Why put small bars back on tho and not the high pro taper ones 🤔

@snyderhaus

2 жыл бұрын

What? I didn’t put small bars back on; they are the pro taper 110 ones.

Meu sonho é ter uma motocross mini

What does that red scrub daddy lookin thing do

I wish I had enough money to buy me one of them pitbikes.... I spent all my money on upgrading my 2017 yz125 for racing

How much i really want one i don’t have a dirt bike

Where do I get that pod filter?

@snyderhaus

3 жыл бұрын

There’s a sticker in the video from where I purchased mine, if I remember correctly it was phat Mx in Canada.

@alaynafolk4994

3 жыл бұрын

i would just get an aftermarket normal one and keep it inside the air box, i don't like them being open like that, they get wet through a little puddle of water, and you can't just rinse the bike off without it being soaking wet and getting water in the carb.

You may want to do more to it

@snyderhaus

3 жыл бұрын

That was the plan. Hence the original series, unfortunately, due to covid etc parts are hard to come by, and if I can, they cost way too much to justify spending.

@pitgroove.37_66

3 жыл бұрын

@@snyderhaus no they don't, they still sell for the same prices they were before.

@snyderhaus

3 жыл бұрын

Sure, if you aren’t Canadian?

@pitgroove.37_66

3 жыл бұрын

@@snyderhaus oh you're up in Canada

Why file the index nubby off the switch?

@snyderhaus

2 жыл бұрын

There is no slot for it to go into, so it won’t attach to the handlebars. You have to remove it and it will work

Why didn’t you put a plug when you were washing it

@snyderhaus

3 жыл бұрын

Plugs are not mandatory. Not to mention, I wasn’t blasting it in the inlet and also was removing that muffler. I’m also comfortable with washing my machines without getting water in there as well.

We’re those tall bars or no

@snyderhaus

3 жыл бұрын

They are but they aren’t the CR50 or whatever, which are the tallest you can get

Klx motocrooss indonesia

Are you not doing videos anymore?

@snyderhaus

2 жыл бұрын

Hey! I had plans to do some more just been really busy. I have some footage filmed of my 300, and just bought a yz125 I was going to do some videos of.

What soap is that

@snyderhaus

3 жыл бұрын

Chemical brothers in a foam canon, pew pew!

@ttv_adrevenue887

3 жыл бұрын

Thanks 😊

Why did he wash his bike when it was already clean 😂

@snyderhaus

3 жыл бұрын

If you see my other comment, gotta make my wife think it’s SUPER clean to get it in the house.. 😉

Why did u put a grip over a grip

@snyderhaus

3 жыл бұрын

Where did I do that? I also doubt I’ve got the strength to pull a grip over a grip 😂

@corbin__1871

3 жыл бұрын

@@snyderhaus when u were putting grips on there was still a huge peace of grip😂

@snyderhaus

3 жыл бұрын

Hey man, I ain’t perfect 🥺

@corbin__1871

3 жыл бұрын

@@snyderhaus lol

what # jets did you do ?

@snyderhaus

3 жыл бұрын

Hey Thomas, I kept the pilot stock I believe and went down to an 85 on the main? I'd have to look again. I have a video of replacing this coming eventually. If you aren't doing pod filter + exhaust I'd say you dont even need to change it. I definitely need to, right now the bike only runs with the choke pulled all the way out for me.

Is it me or does it not have balls because it has stock jetting?

@FreedomotorsportsLlc

3 жыл бұрын

And you said you got to jet it i spoke too soon lol.

Where is he now

@snyderhaus

2 жыл бұрын

Where who!?

エキゾーストパイプのヨシムラが逆ですよ😅

You need to jet the bike bro

@snyderhaus

2 жыл бұрын

Yep, I agree.

did he say 5 + hp when added a gas cap

@snyderhaus

3 жыл бұрын

I think he did? What the heck

@junkhondas481

3 жыл бұрын

Seems like a low estimation I would have guessed 13

They are to different bikes look the one he builds has a clutch but the one he rides doesn’t

@snyderhaus

Жыл бұрын

Sure, but it doesn’t matter what bike you do it to. I did it to both my L and standard

The bike looked like there was no dirt and he still washed it

@snyderhaus

3 жыл бұрын

The premise was to appear like I had washed it; so my wife would allow me to bring it into the house for those wondering. You’ll all learn one day.

@macmills4145

3 жыл бұрын

@@snyderhaus I know dude I was putting that out there I wasn’t trying to be mean

@snyderhaus

3 жыл бұрын

Haha don’t worry that was indirect to the people who keep commenting on it! 😂

put hand gaurd on the outside of the brake and throttle assembly

@snyderhaus

3 жыл бұрын

This will NOT work. To use the stock levers without new cables you have to put them like this, otherwise you will pull the cable too tight when turning the handlebars.

why on early would you ever spend time or money in a 110? i could see mabey a 125 two stroke but shit a crappy 4 stroke?

@snyderhaus

3 жыл бұрын

That’s your opinion. Have you rode a 110? Judging by the comment, I don’t think so. You should probably ride one and then come back and comment...

@dylanmacleod6589

3 жыл бұрын

@@snyderhaus listen pal. ive had crf 50's 70s a china 150 bike, a crf230. i currently have a 2001 YZ125, and a 99 KX250, and also a LTZ400. that 110 wouldnt hold a candle to my 50cc moped

@dylanmacleod6589

3 жыл бұрын

@@snyderhaus you should also come back and comment when you get a real bike and some work boots

@snyderhaus

3 жыл бұрын

Lol why are you so mad? Get out of here.

@dylanmacleod6589

3 жыл бұрын

@@snyderhaus lmfao not mad. you talk tough about a 110. i have not rode one, my little 9 year old cousin Elizabeth has one though. I was just saying your a father with kids and still getting to a 110. I'm 16 scraping a KX250...

U need to re-adjust the carb for that exhaust otherwise it’s gonna keep bogging down

You built everything on the L but rides everything on the small wheel

@snyderhaus

3 жыл бұрын

I have both of the 110’s and put the same stuff on them. Rode the 110 non there because it was the bike I had with me at the time. 🤷‍♂️

Drive faster

Huh never knew a pipe and some bars constituted a "build". Was hoping to see at least a big bore kit or maybe a bike that ran right when it was finished. Those things are under jetted from the factory you can't throw more air through it and expect it to run right.

15:38 haj ded

Am not so impressed by that bike. How about get a Suzuki rm 85 instead

@snyderhaus

3 жыл бұрын

I’m not sure what purpose it would serve to change to insert whichever other bike suggestion here? Is there a reason for the rm 85 specifically?

@mrsandman5679

3 жыл бұрын

@@snyderhaus both bikes are about same size. You never left of The gas The bike is to week for u a rm 85 would be better

@hondaguy425able

3 жыл бұрын

@@snyderhaus if I'm not mistaken the klx is more of a trail bike. a two stroke rm80 or kx would be much better.

Wash plug bro

why is this such a bad part list😭

having no exhaust plug in when u were washing it made me triggered ngl

@snyderhaus

3 жыл бұрын

If you arent comfortable or capable of washing your bike without one; by all means use one!

24:41 Nice Voice Crack

@snyderhaus

3 жыл бұрын

Thanks bro. 👊

Bro it’s cool but it’s not a build u put an air filter and an exhaust on it and some hand guards put some 65 forks on there with 65 hubs and rims so u get disk breaks and shit and then call it a build

@snyderhaus

3 жыл бұрын

I don’t understand what your complaining about?

@rehmanvirani8415

3 жыл бұрын

@@snyderhaus i think this bike is awesome! Haters Like this loser probably have nothing better to do. Keep Up the great work man ✌️

This guy does not know what he’s doing

@snyderhaus

3 жыл бұрын

Boohoo.