Thank you INTOTHEAM for these Elevated Everyday Graphic Tees! Get yours now and get 10% off site-wide when you click the link bellow: intotheam.com/ADM

IRON WITHIN!! awesome to see yah do an Iron Warrior. They are my favorite Chaos legion.

@AnotherDayMiniatures

3 ай бұрын

IRON WITHIN! Cheers mate! Honestly been meaning to give them a go for a while now. My dog had to wear a cone with hazard stripes this week, decided if he joined the Iron Warriors, it's time to paint one 😄.

@bonechip01

3 ай бұрын

Iron Without!

Iron Warriors always look great kitbashed with loyalists, this is because they reluctantly serve Chaos and don't appreciate mutations and kitschy trim.

@AnotherDayMiniatures

3 ай бұрын

Indeed. Renegade warbands have a really cool ability to incorporate both elements and stay awesome.

In hindsight, the freehand chevron have a more 'chaos-y' effect on the eyes. Looks great imo

@AnotherDayMiniatures

3 ай бұрын

That's fantastic to hear, I was very critical of it at first but after the weathering I think it worked out better than I initially thought. Thank you!

Tip for watchers: It's usually better to make difficult changes (like removing aquilae and purity seals) before assembly so you don't have to worry about: • not being able to reach a spot • accidentally breaking something • removing too much and needing to repair in the same difficult circumstances

@AnotherDayMiniatures

3 ай бұрын

Really great tips mate, cheers! Honestly something I should mention in the future if memory doesn't falter. Working on those arms, especially the claw, would have been a nightmare if it was assembled.

These are some excellent conversions and paintjobs, the color on the armor looks amazing 👌

@AnotherDayMiniatures

3 ай бұрын

Thank you! For a moment when painting them it felt like they weren't turning out that well, but in the end I did end up enjoying the final result.

Dude the glow effect is amazing with out air brush

@AnotherDayMiniatures

2 ай бұрын

Cheers mate

Abosultely awesome job, I'm definitely gonna give Exhaust Manifold a go if I ever paint Iron Warrios. The minis turned out killer with the kitbashing, awesome work.

@AnotherDayMiniatures

3 ай бұрын

Thank you mate! Yeah I overlooked it for quite some time, but that faint shade of yellow works really well in large panels.

@nikot.9920

3 ай бұрын

@@AnotherDayMiniatures agreed. It gave the metal a unique look of light grime and depth, well done

your texture work is crazy

@AnotherDayMiniatures

3 ай бұрын

Cheers mate 😃

Those turned out amazing. Cant wait to see what you do next

@AnotherDayMiniatures

3 ай бұрын

Thank you!

>very old terminator spikes >spikes from the 2019 kit Anyway, great video!

@AnotherDayMiniatures

3 ай бұрын

Are they really ?🤣 I honestly thought they were from the Chaos Lord in Terminator Armour, which is like a 2009 model. Also thank you mate!

the shaved down Not so busy terminator armour works well for iron warriors

@AnotherDayMiniatures

3 ай бұрын

Yeah I think renegade legions work really well for a less cluttered look.

Beautiful work man, Iron Within.

@AnotherDayMiniatures

3 ай бұрын

Cheers mate!

Really cool stuff

@AnotherDayMiniatures

3 ай бұрын

Cheers mate

10:25 Looks REally Amazing!

@AnotherDayMiniatures

3 ай бұрын

Thank you!

Really cool.

@AnotherDayMiniatures

3 ай бұрын

Cheers!

They look great, but you really should give them some IW transfer decals and stuff

@AnotherDayMiniatures

3 ай бұрын

Cheers! Honestly the thought of decals didn't really cross my mind, I have a very love/hate relationship with those. Love the way they look, hate ever having to deal with them 😄

@B4H4D4

3 ай бұрын

@@AnotherDayMiniatures I disagree I think they look fantastic as they are, the metal looks so good. makes them look super tough

@AnotherDayMiniatures

3 ай бұрын

@B4H4D4 Thanks!

Very impressive, also if I generally paint the head separately from the main body, and then glue it just before the varnish, at least with this kind of figures.👍

@AnotherDayMiniatures

3 ай бұрын

Thank you! I'm personally not a fan of the sub assembly process, I tend to avoid it if I can. However It's definitely the best way to achieve the best result.

These look sick!!!

@AnotherDayMiniatures

3 ай бұрын

Cheers mate!

Good job

@AnotherDayMiniatures

3 ай бұрын

Thank you

You're quickly becoming my new favorite content creator! Keep up the good work

@AnotherDayMiniatures

3 ай бұрын

Wow thank you so much for the compliment, hopefully I can keep it up 😄.

I wish I could paint this well

@AnotherDayMiniatures

3 ай бұрын

Cheers! Practice and time and you can paint even better. At the end of the day, its more about just enjoying the process.

The ols are just beautiful like this is what I aim to achieve

@AnotherDayMiniatures

3 ай бұрын

Thank you!

My only opinion to change is to make the helmet on the trophy rack to be a imperial fist

@AnotherDayMiniatures

3 ай бұрын

I'm entirely in favor of that change 😄

Very funny for me to get this in my recommendations when I've been doing something kinda like this - I had some Cataphractii sitting around alongside three Indomitus terminators and I just kinda went "Fuck it, let's see how these look combined!" And man, Cataphractii arms look *great* on the Indomitus body. Very big, imposing figure. Also managed to fit some spare Possessed bits on, since I'm kitbashing a homebrew Chaos/renegade warband that leans pretty far into that sorta thing.

@AnotherDayMiniatures

Ай бұрын

KZread has it's mystical ways :D Yeah it's fantastic that GW has a similar scale on all their updated models, makes it much easier to kitbash awesome ideas.

Damn, you’re a really good painter

@AnotherDayMiniatures

3 ай бұрын

Thank you so much! 😀

I recently took one of the deathwing Knight terminators that are the miniature of the month and converted it into a loyalist iron warrior from one of the alternative heresies because that means I still get to play iron warriors but I don't have to paint up all the nasty little trim that comes on so many chaos models and because of rules I can play them as chaos or loyalist I just have to still use the chaos rules for the gameplay and I had to get rid of a bunch of details like the Crux terminatus and the dark Angels chest symbol thankfully I was able to use the power sword arm and my brother was nice enough to let me get a storm bolter arm for the left arm instead so I didn't have to use the big shield and I can use that for when I work on my grey Knight kaldor Draigo equivalent for my Homebrew 11th legion the war foxes using customized grey knights that I still have to play with grey Knight rules and they have the Mecca wolf heads from the space wolves for the Horus heresy upgrade kit and I have to make some epoxy putty fox tails for every single member of the army because like how the black dragons grow bones out of their bodies that sometimes can be used as weapons the war foxes literally have a extended tailbone that look like a Fox's tail and thankfully I only have to make like five or six different designs for the position of the tale and I can use some blue stuff to make copies of them so I don't have to sculpt like 40 tails and I can use the blue stuff to copy the fox wolf heads as well although my brother did find a file for them that he printed out for his space wolves so he can always print out more heads for me as well

@AnotherDayMiniatures

Ай бұрын

That sounds amazing, great job coming up with such an interesting idea for them. I'm a bit surprised they had that awesome model as the mini of the month, but also very lucky on the timing!

I guess one way to deal with the purity seals could be making them Word Bearers. Edit: and you could probably get away with keeping the insignia if you gone with them being in a recently corrupted chapter.

@AnotherDayMiniatures

Ай бұрын

Yeah great suggestion. My next project actually has a similar idea with the insignia, where some have it but others don't.

Sandpaper had a 20 on the back, but it for sure wasn't 20. 200 most likely.

@AnotherDayMiniatures

3 ай бұрын

Yeah, 20 is borderline literal grains of sand 😄. I think it might have been closer to something like a 1000. It wasn't rough at all.

For anyone trying to criticise the dull knife. he is using it in a manner which is very controlled and positioned so it cannot hit his finger. midwinterminis has a video explaining it. many kitbashers and professionals use dull scalpels. the issue you're talking about happens when someone uses a dull knife THINKING that the knife is sharp. that's when accidents happen

@AnotherDayMiniatures

3 ай бұрын

I believe criticism is very healthy, and in this situation, it has brought up some excellent points. However, there seems to have been a significant misunderstanding regarding the term 'dull.' I hoped that mentioning the butter knife part would reinforce the idea. The edge has been sanded smooth; it can't really cut. It works with plastic mainly because plastic is a stronger material, allowing the 'knife' to work its way in. Similarly, you can technically scrape miniature plastic with a spoon (I have tried this before). Using a sharp one so close to your fingers, not to mention I sometimes just grab the blade, would indeed 'end badly,' as I mentioned.

Bro went full golden demon on the paintjob

@AnotherDayMiniatures

3 ай бұрын

Thank you so much for the compliment! The Artists in Golden Demon are honestly at a whole other level, I think my wonky lines would get me kicked out of the building 😄

"look like they work in a bell tower" lmao damn

@AnotherDayMiniatures

17 күн бұрын

😁

Oh neat! I used that chain tabard thing to make my oldschool khorne berserker champion stand out, i just hacksawed a right angled depression at the top then used a bit of sprue goo to fill it around the crotch

@AnotherDayMiniatures

3 ай бұрын

It's such a nice bit, and it's not connected to anything. There are so many cool primaris parts I would really love to have as their own separate bit. Do you by chance know what kit it's from by the way ?

I might consider converting my Rise of the Orks Terminators into Plague Marine Terminators Any suggestions on how I could convert them and what to run them as?

Could you do these in a black legion color scheme? That would be really cool, also IRON WITHIN IRON WITHOUT!

@AnotherDayMiniatures

3 ай бұрын

I did consider making the second one in alternative colors like Black Legion colors, but it felt like every other Chaos Legion would have a lot more ornaments on their armor. I think converting the new Captain in Terminator Armor would create a much more interesting Black Legion terminator. This is possibly something to revisit in the future. Cheers!

"This is art" - Peter Turbo

@AnotherDayMiniatures

3 ай бұрын

😄👍

Looks awesome! What gloss black primer did you use?

@AnotherDayMiniatures

Ай бұрын

Vallejo Black Surface Primer ( Acrylic Polyurethane)

Great conversion! Might just do this for my chaos boys. Just some minor C&C, watch your videos back in the edit, your audio cut out mid word/sentence a few times in this video

@AnotherDayMiniatures

3 ай бұрын

Thanks mate! Yeah there was a few audio problems that came from a weird exporting issue. Unfortunately I didn't catch them until the video was uploaded. Editing is one hell of a beast for sure.

just wow

@AnotherDayMiniatures

3 ай бұрын

Cheers!

Wouldn't it have been easier to file the details off when it was on sprue rather than fully assembled?

@AnotherDayMiniatures

3 ай бұрын

Personally find holding the part and being able to rotate it much easier.

oh im so doing these for my red corsairs

@AnotherDayMiniatures

3 ай бұрын

Hell yeah! Always amazing knowing someone saw something interesting enough to try.

I wonder if cataphractii kit being already really bulky will fit new termies

@AnotherDayMiniatures

3 ай бұрын

I did try that at first, but their arms are just not as long. Giving them almost a t-rex feeling on the indomitus pattern. Putting them side by side the difference is about what you would see between a primaris and first born, which is a bit odd given how recent their release was.

Your fingerprint comment gave me an idea... what if you did a model where you put fingerprints all over it on purpose? like that one shield from elden ring?

@AnotherDayMiniatures

3 ай бұрын

That's such a cool idea, I'm definitely going to test it out and see if I can make something from it. Cheers mate!

My personal opinion: Hazard stripes on greaves: OK. Hazard stripes on power first: OK. Hazard stripes on shoulder pad: OK. Hazard stripes on all three: Not OK! I would replace some with squad, and/or army markings. Aside from that, I think this conversion turned out BRILLIANT!

@AnotherDayMiniatures

3 ай бұрын

Cheers mate! I guess the second fella was a bit more to your liking 😄

@Grubnar

3 ай бұрын

@@AnotherDayMiniatures Oh they were BOTH very much to my liking. I just think it was a bit too much.

@AnotherDayMiniatures

3 ай бұрын

That's great to hear, I thought the over doing it part might have spoiled it entirely. I think it might have worked better if that mini had a small knee pad, instead of needing to cover the entire leg.

The skin looked amazing ( at least to me) before the glaze of Bugmans Glow. Then again I am obsessed with having pale skin on all my "bad guys" of 40k

@AnotherDayMiniatures

3 ай бұрын

Cheers mate! Honesty had the same idea to go for a very chaos corrupted pale skin tone, but it just looked a little off to me in the moment.

+ IRON WITHIN +

@AnotherDayMiniatures

3 ай бұрын

Iron Without!

I only have vmc silver and steel would they be ok to use?

@AnotherDayMiniatures

17 күн бұрын

I don't own any silver to test it out, unfortunately. However, steel would work the same, the hue would be slightly different, but it's very subtle.

@BeepBoop2221

12 күн бұрын

I assume more blueish?​@@AnotherDayMiniatures

@AnotherDayMiniatures

12 күн бұрын

@@BeepBoop2221 Steel is surprisingly neutral. I think you could add a tiny amount ( just a little on the brush ) of umber ink or contrast color and warm it up a bit.

Telling people to use a dull hobby knife is really bad advice. Blades are more likely to slip and cut the user when dull. Statistically a sharp knife is safer.

@danforthlaertes

3 ай бұрын

I came here to say exactly that. A sharp knife and attention is better than a dull knife. Plastic is tougher than your skin - whatever force you are applying to cut plastic (with a knife of whatever sharpness) WILL cut your skin. The more force you apply, the less control you have and the more likely something is to suddenly "give" and send a blade going where it shouldn't. Sharp knife requires very little pressure and means you have total control.

@thenerfkid9228

3 ай бұрын

Replying so he sees it.

@KiwiTheIguana

3 ай бұрын

Plus you have to put more force into a dull knife so when it does inevitably slip it’s going to do a lot more harm to you.

@tomfrommicromanagement9716

3 ай бұрын

Went down here to comment the exact same thing. A dull blade is waaaaves more dangerous then a sharp one. I'm only ever cut myself on older blades. I also cut towards myself and I know it's taboo but i couldn't care less lol. We have more muscles in our wrists and arms to control cutting towards ourselves than away; you gain more control (this part isn't directed to you, just I'm just yapping).

@danforthlaertes

3 ай бұрын

@@tomfrommicromanagement9716Yep - the whole idea of "cutting away" is a simplistic one I wouldn't recommend. One should cut so the natural movement of the knife DOES NOT intersect with any part of yourself (or anything else you don't want to cut!) but cutting away from yourself sometimes means you have a lot less control. Using both hands and a VERY sharp blade and bracing everything carefully means you can have a lot of control.

i get scared every time i put a new blade in my knife

@AnotherDayMiniatures

3 ай бұрын

I used to have that same feeling, "Well, better be extra careful, so I can still use my fingers to count to 10". Endless cuts, with one really bad one that had me in a bit of a panic 😅. Sanded down this one to a nice smooth surface and haven't had a cut from it since, just a lot more effort to scrape things off.

holy fuck your amazing

@AnotherDayMiniatures

3 ай бұрын

😅🤘 Cheers mate

I don't know how some people do it with painting faces Unless it is a named character It is helmet army all day long

@AnotherDayMiniatures

3 ай бұрын

When you need to paint a large number of units, helmets are definitely much faster. However, I do enjoy seeing a face here and there, as it gives an interesting visual contrast by showing a human inside what sometimes seems like an automaton.

I have most accidents with blint blades since you use more force to cut. Controled cuts (still towards your thumb, using your other thumb as a buffer) is the safer way, like with food prep

@AnotherDayMiniatures

3 ай бұрын

It seems that this is definitely a topic with a wide range of experiences. I think I should have made it clearer that I was addressing the issue of the blade being entirely dull, especially in the specific way I used it in the video. Using a sharp knife is entirely valid, but I would never use one in the same way as demonstrated. I would avoid making so many cuts towards myself, not to mention keeping my fingers well clear of the blade. I have used sharp blades before, and indeed, as they became duller, they would become more unpredictable. However, in my specific instance, it's well past the point of having the ability to make a cut. I do believe that using well-sharpened knives is way better when it comes to cooking.

@joedawg39s

3 ай бұрын

i try to cut towards my thumb nail when i do dumb.

Nice work, but I have to say hazard stripes always drive me crazy in alternate universe settings. Why would they come up with the exact same iconography that we did? It's just one of those things that always takes me out of the fantasy.

@AnotherDayMiniatures

3 ай бұрын

Cheers mate! 😄I have some similar pet peeves with a few things in scifi. I think it does make a bit of sense with hazard stripes, with them being aimed at human part of out brain that recognizes stripes ( tigers, hyenas, wasps, bees...etc) as a danger and warning.

@JCPRuckus

3 ай бұрын

@@AnotherDayMiniatures - Maybe there's something to what you say, but still, it could be any color. But everyone always does black and yellow, not black and red, not white and orange. It's just... so unmistakably exactly what we chose on our version of 20th century Earth... 🤷🏾

I just have to say, a dull blade is more dangerous than a sharp one. More pressure has to be exerted to get the same result as a sharp one, and no matter if you cut towards yourself or away; there is a major risk of hurting yourself.

@AnotherDayMiniatures

3 ай бұрын

It is something I follow myself when it comes to cooking. However, I did find that when it comes to minis, using one of those when they are sharp often resulted in injury. The one I use is more or less entirely dull, and as a result, it can't cut. It definitely felt more important to address my knife being incredibly dull-enough to hold firmly with two fingers. The way I was using it in the video would probably be incredibly unsafe with a sharp one. If you find that a sharp one works better, it's entirely valid. I think it's definitely a scenario where different uses and approaches can work. However, I would also use it entirely differently if that knife had any sharpness.

what grit is that sandpaper? asking for a friend

@AnotherDayMiniatures

3 ай бұрын

I know what I said, but I did find out it's literally written on the back 😄 1000

@highlordalcadizakyr1479

3 ай бұрын

yeah they are all labeled that way, but thats realy not an relevant info, if u know how to sand things or sharpen an knife. start with a low number and go as high as u want until u like that finish 😄

sharp is safer, you get stabbed when you knife gets hung up and you force it

@AnotherDayMiniatures

3 ай бұрын

I do think that's 100% true and something I practice with kitchen knives. However, with plastic, I've personally found it to be a different situation. I hoped that mentioning the part about the butter knife would reinforce the idea of it being 'Dull'. The edge has been sanded smooth; it can't really cut. It works with plastic mainly because plastic is a stronger material, allowing the 'edge' to work its way in.

@joedawg39s

3 ай бұрын

@@AnotherDayMiniatures sweet terminators doe

@AnotherDayMiniatures

3 ай бұрын

Thank you

wow1

@AnotherDayMiniatures

3 ай бұрын

Cheers!

Take a shot every time he says "really"

@AnotherDayMiniatures

3 ай бұрын

Include the word 'Very' in there, and as long as you're taking shots of water, you'll stay very well hydrated ;)

The actual CSM terminators look better imo. For maybe 1mm of height you sacrifice all the trim, skulls, and other molded details.

@AnotherDayMiniatures

3 ай бұрын

That's fair

OH GOD PLEASE GET BETTER BRUSHES good vid though

@AnotherDayMiniatures

3 ай бұрын

What's wrong with the brushes 😄 Cheers!

"I found this really cool head with a ponytail. Then i cut the ponytail off. Then i didn't like it anymore"

@AnotherDayMiniatures

3 ай бұрын

I still think the head looks awesome, even without the ponytail. However, within the context of the miniature, it didn't give the look I was hoping for. That made me realize that the original head worked better.

Cataphrachii…

@AnotherDayMiniatures

3 ай бұрын

Let's be honest, if they can't decide how to pronounce 'Abaddon' in all the audiobooks and videos, I'm safe with this one 😅.

@Prophetofthe8thLegion

3 ай бұрын

@@AnotherDayMiniatures I’ve never heard a GW employee not pronounce Abbadon as Ab-ba-don. Audiobooks…well tbf they don’t get paid to care they just get paid to narrate.

@AnotherDayMiniatures

3 ай бұрын

The first time I actually heard someone say "A Badon" was the official Warhammer painting tutorial. 😄

@Prophetofthe8thLegion

3 ай бұрын

@@AnotherDayMiniatures lol

DO NOT USE A SHARP KNIFE LISTEN TO HIM I JUST GOT BACK FROM THE HOSPITAL FOR ALMOST CUTTING MY FINGER OFF.

@AnotherDayMiniatures

3 ай бұрын

That sounds awful, hope you have a swift recovery soon mate.

sorry dont wanna be the "akchually" guy but it safer to use sharper blades rather than dull ones..with sharp ones u need minimal force so u have a lot more precise control while dulls may need to be used quite hardly and when u get cut the sharp will leave a more even, cleaner cut which can heal better, while dull blades cause more tissue damage and might leave tiny chunks of dirt or plastic due to the roll and nicks in the blade in your body, raising the chance of an infection...source: trust me im a cook

@AnotherDayMiniatures

3 ай бұрын

It's absolutely valid, and not at all an "akchually" moment. I definitely agree that it's safer to use sharp knives instead of poorly sharpened ones, I personally practice that with my kitchen knives. However the one I use for my hobby is literally dull, its been sanded smooth. That's why I feel so comfortable holding it with both fingers. Plastic does have a tendency to 'grip' the blade, as you described, especially if it's not smooth or is poorly sharpened. The blade has more ridges for the plastic to catch on and get trapped. Miniature plastic is smooth enough that you can literally scrape details off with a spoon (not joking). Personally I found that using something much thinner than a spoon, while still dull, has great results while almost eliminating the risk of injury.

I would be happy if people start hand freeing actual chapter symbols or at least put some transfer on those models. the paintjob is nice but it still feels meh

Bad head choice, Iron Warriors actually wear their damn helmets

@AnotherDayMiniatures

3 ай бұрын

Let's imagine that the helmet is on, and we are seeing through the helmet 😉

Remember Iron Warriors armor isn't iron, it's ceramite. It too is painted.

I hate drilling the barrels and do not do it I have such a good eye that I see the slightest deviation from centered drilled out barrels, and most of what I've seen even on youtubers, like 90% of them are not centered (yours too are horribly crooked) and I prefer a not drilled out barrel on a model over missaligned barrels

@AnotherDayMiniatures

3 ай бұрын

But how will the bullets come out ? :O

@LordBelakor

3 ай бұрын

@@AnotherDayMiniatures In my case through magic, which is legit for my Chaos Space Marines, in your case like a Stromtroopers gun, everywhere BUT the target :D

Gotta downvote for the dull blade comment. Really cool video otherwise, but this is genuinely dangerous misinformation. I think you should either edit it out or at least put in a disclaimer.

Use a dull knife? Are you kidding? Terrible advice.

that "weathering effect" is how I used to "camoflague" battle-tech mechs. Congratulations on finding the technique... decades later. heretic.

@AnotherDayMiniatures

3 ай бұрын

I think I can now add 1 toughness to them and say it's due to their "camoflague" 😄

@stephenkolostyak4087

3 ай бұрын

@@AnotherDayMiniatures that makes more sense than anything Uncle GW has come up with, so I say go with it... in your heresy.