Thank you so much for posting this. I thought I was crazy when I followed the directions and couldn't find a switch.

Thank you! I was about to throw mine against the wall.

Many thanks! I, too, had to pop off the back in order to access that black lever thing. Simply pushed it UP - ironically, AWAY from the "OFF" printed at the bottom of that black plastic lever section!

I am a 76 year old lady trying to replace my CO² detector. Your method is so easy. Thank you so much.

THANK YOU!! The beeping was driving me crazy and I couldn't turn it off following the instructions. Much appreciate you recording and sharing this!

Thank you, from me & my family who were totally nuts with the constant beeping..😊

Thank you so much! That switch would not budget otherwise, even with a huge amount of force. No more Kidde alarms for us.

Thanks for posting! I had to crack mine open as well because that little plastic bar was keeping my switch from being shifted upward!

Thank you for the video! Impressive problem solving. I laugh at myself now for not trying your way, being an electrical engineer even 😂

Thank you so much for taking the time to make and share this video. The chirping was driving me crazy. My Kidde C3010 unit lasted over 10 years. Silence is truly golden.

Thank you! I was woken in the night by this issue (cats having hysterics because of the beeping) and had exactly the same problem. The screwdriver trick worked a treat, thank you so much

After watching too many videos this video was my life saver and I just wanted to thank you for it and bless you❤️🙏

Thank you so much for your instructions!! I thought it would be easy to open and take out the batteries. NOPE! Totally different animal! I researched the model and found you with easy-to-follow steps on disabling and I had it open in 10 minutes.

@IndieMind-NativeHeart

Жыл бұрын

So happy to hear it worked for you!

Thank you thank you thank you for this video! The beeping was driving me nuts.

Thank you! Was having a phoebe from Friends moment!

After disassembling as you demonstrated I found that you CAN disable the detector by following the printed directions. The black switch is visible near the top of the slot and you have to push the screwdriver really hard against it, toward the top of the unit. The white plastic piece acts as a spring to prevent switching it off by mistake.

@shellysstuff9727

13 күн бұрын

same! but I was going nuts without your video. THANK YOU. my reset button just beeped at me every time I tried to reset. Saved me and the pup.

Thank you! Mine started chirping in the middle of the night and, since it was a digital model I could see the END message. I knew that it was old, so I had a replacement, but I could not disarm this one. The Kidde website was no help, and that chirp is annoying! Fortunately, I had the exact same switch issue that you showed here, and I was able to silence the chirp. 😊

I had the same issue on 2 of these units. I called Kidde support. They had no clue about this problem and ended up telling me to throw them in a bucket of water to deactivate them. I did not do that. After watching your video, I was able to deactivate the CO alarms and remove the batteries. Thank you!!!

Thank you! This was a migraine trigger and you saved me

Thank you for the video! And more importantly… My dog Gizzy thanks you! The noise was scaring him. 🐶

Great instructions, thanks!

Welp you saved my sanity today.

Thank you!!! 3am saver when it wouldn't stop beeping.

THANK YOU!

Thanks a Million!

You are a life saver!

So I have a similar detector that battery just ran out - had to rip open the detector and remove battery. No more beeps. Home Depot tomorrow for a new one

Thanks!!

Thank you, thank you, thank you!!!!!

Thank you so much! Back to sleep I go 💤

Thank you!!!!!

thanks for your help. ok...it was long winded - that's my only rub with your explanation. So we can all agree that you CANNOT replace the battery and that your only option is to buy a new unit. unless of course someone has circuitry knowledge to remove and replace the battery.

Thank you

Trying to disable mine now.

It takes a couple hours for the battery to discharge after you push up the switch.

THANK YOU!! 😂😂

Look at the front button it test/reset so that means to test it's one long hold only if you hit it two times it stops the noise I did this to but that works

@IndieMind-NativeHeart

Жыл бұрын

Thanks! This video is for when it’s time to throw the unit away and disable the battery.

Mine is attached to the ceiling. I got the cover off but can't work out how to get the other half off the ceiling. It seems to be screwed in but I can't get to the screws.

this is nothing that big hammer wont fix

Just tap it twice not long taps just two taps it will turn it off I have one of these

You are right this thing did not make thru 10 years...only last 3years and starting to beeping and it won't shut off .thank for your great video how to disable..thing crazy alarm hehehe..

get to the damn point jesus

dislike