No video
Kia P0112 ECT IAT Temperature Sensor Testing
Video describes the Kia P0112 ECT IAT Temperature Sensor Testing procedures and how this sensor works.
PDF Ebook Catalog: www.autodiagnosticsandpublishi...
Software Catalog: www.autodiagnosticsandpublishi...
Equipment Catalog: www.autodiagnosticsandpublishi...
Our website: www.autodiagnosticsandpublishi...
Instagram: / adptraining_youtube
LinkedIn: / mandyconcepcion
Facebook: / autodiagnosticsandpubl...
Join my channel ADPTraining: / @adptraining
Пікірлер: 27
I like to use a variable resistor, put it in series and move resistance while looking at data to see if it changes. Checks wiring and computer processing data very quickly
@ADPTraining
4 жыл бұрын
Ok, that's a more advanced video I want to do next. Yes, the issue is that in newer systems, if the ECM sees a sudden rise in temperature it'll flag a code. I am actually working on a sensor simulator, electronically based, that operates like the ECM. Like to test cooling FAN reaction, injection pulse when cold, and temperature related issues to do with the ECM. by the way, your Zapper Cable is on the way. autodiagnosticsandpublishing.com
Thanks for this. You said dont apply 12v to ground side because it will damage the ECU? However, how would you load test the ground side? would you use an incadescent test light to B+?
@ADPTraining
2 жыл бұрын
Disconnect ECM. www.paypal.com/donate/?hosted_button_id=F9W5VPHTGWBV6
Thanku sir
@ADPTraining
3 жыл бұрын
Thank you. www.autodiagnosticsandpublishing.com/OBD_2_DLC_Health_Checker.html
Sounds like you recorded the audio in the bathroom. Good video 👍
@ADPTraining
4 жыл бұрын
And I did, but I wasn't pooping. Just washing my hands... Just kidding. Thanks for posting. autodiagnosticsandpublishing.com
could you probe the wiring shorting connector at the ita with a multimeter continuaty test and if it beeps your wiring is good
@ADPTraining
Жыл бұрын
No
Hello, on ECT ground I have no continuity to any pin of ECU or to vehicle ground, when I test it with multimeter beeper. Is it fault in wiring for sure? Car is having very bad temp. related issues like bad cold starts and stalling when hot. It is volvo 850 and I have no fault codes thrown. Thank you for video!
@ADPTraining
Жыл бұрын
You have a missing ground, concentrate on the.
👍👍👍👍👍👍👍👍
@ADPTraining
2 жыл бұрын
www.paypal.com/donate/?hosted_button_id=F9W5VPHTGWBV6
Nice video in the wiring diagram the arrow going to ecm microprocessor is wrong the wire has got to be takened
@ADPTraining
3 жыл бұрын
What's wrong about it. It's a two wire simple sensor, consisting of a voltage divider network. One resistor inside the ECM the other the sensor itself. www.autodiagnosticsandpublishing.com
@anthonysova7117
3 жыл бұрын
@@ADPTraining Y
@anthonysova7117
3 жыл бұрын
Yes ur correct When I looked at the wiring diagram I found the problem I created thought I saw the wire connected to the 5 volt ecm Kind of jumped the gun SORRY
Toptoptoptop
@ADPTraining
4 жыл бұрын
That's right... autodiagnosticsandpublishing.com
Sorry the wire has got to go between the 2 resistors to sense voltage drop cheers
@ADPTraining
3 жыл бұрын
One resistor is inside the ECM the other is the ECT itself. In escence it's a voltage divider network. www.autodiagnosticsandpublishing.com
When you say “jump” do you mean add 5 volts
@kinglangren
4 жыл бұрын
Ok your video answered thanks
@ADPTraining
4 жыл бұрын
Yeah, I see you got it. Sure, the signal wire, when disconnected has 5 volts. This is in series with the ECM internal resistor. autodiagnosticsandpublishing.com
Does anyone at adpt know how to talk with intelligence!!??
@ADPTraining
Жыл бұрын
Sure, Bill Carrick