Kenworth Cabover "Krystal" Lets Get After It
Автокөліктер мен көлік құралдары
Join this channel to get access to perks:
/ @jamespretty
Don't Forget To Subscribe to Jessica's Marmon Channel @Makinitpretty
Partsam LED Lights www.partsam.com 10% off code jamespretty1
check us out on
www.jamespretty.shop and check out our merch
JamesPretty.inc
Pretty_Kool_Kustomz
www.tiktok.com/@JamesPretty.inc
Пікірлер: 108
it's getting warm , outside at last.
@JamesPretty
Ай бұрын
It is for sure
Good deal brother now she is good for another million plus miles keep up the good work can't wait to see her done
@JamesPretty
Ай бұрын
Thx bro
@billysmith2494
Ай бұрын
Yes sir you keep up all the good work
@hereintranzit
Ай бұрын
The only problem I see is with the nut behind the steering wheel. I don’t think that you’ll find any driver willing to drive for hire a truck with an all steel suspension in this day and age ! It’ll be hard to find shippers willing to load freight on a non air ride truck too. I started driving in the eighties with a ‘76 Autocar S-64TF, 300 hp first gen NT-855 big cam Cummins, 5&4 Spicer tween stick, air starter, no brakes on the steer axle and “armstrong” steering with a huge 22” steering wheel. That thing was so loud you couldn’t hear yourself think and rougher than a rodeo bull ride, but that’s how trucks were back then ! The Yukon roads and the Dalton Highway in AK didn’t help much with the ride either ! LOL
@JamesPretty
Ай бұрын
@@hereintranzit first I wouldn’t put a driver in this truck. Second it ride better than the fld’s on airliner
@stevencaka
Ай бұрын
@JamesPretty I’d drive “Crystal” if it was possible. Some guys just aren’t cut out for us old school guys like me back in the day when my neighbors had a few in their heavy duty tow fleet. With that wheel base on “Crystal”,…she couldn’t ride all that bad anyways
Don’t forget guys hit the 👍 button to give Captain James a boost
@JamesPretty
Ай бұрын
Thx brother
I just did the suspension bushings on my old Pete. The first one was the worst, after that I found the easy way. Big impact, big hammer , big torch.
@JamesPretty
Ай бұрын
Yep I use the torch a lot on the next two videos
Ive done many of those radius arm bushes on trailers....one side of the trailer would have adjustable radius arms ,so that you could adjust the alignment of the axles...had to press fit the bushes into the radius arms ...
You sure brought this old girl a very long way you put a ton of work and money into it and you’ve breathe new life into it I love what you’re doing with these trucks and I love the video content. Cheers brother ❤
@JamesPretty
Ай бұрын
Thx Paul
Great video James glad to see Krystal getting some maintenance done. Looking forward to your next video stay safe James.
@JamesPretty
Ай бұрын
Thx bro
I like the sound effects James! That extra grunt gets it tight!
@JamesPretty
Ай бұрын
Hahaha sure does
James Krystal is coming along nicely.
@JamesPretty
Ай бұрын
Thx David
Great video James. Thank you for for your hard work you do to restore Krystal.
@JamesPretty
Ай бұрын
Thx chip
Hi James great show. Loved our visit at mid America truck show. Also the show on the airplane you fly.
@JamesPretty
Ай бұрын
Thanks so much for being here
Good job i do things a little at a time
Frickin awesome James
DAMM that's a lot of work but very rewarding. Great job James as always appreciate ya.
@JamesPretty
Ай бұрын
Thx bro
That all went relatively well, good job done. (So far!!)
@JamesPretty
Ай бұрын
It gets much worse lol
Thanks for the video James. I know I say it every time I comment but I love your trucks. Wish I lived closer I’d help you work on them.
@JamesPretty
Ай бұрын
Thx Jed
Glad that you are back working on the trucks again. Very enjoyable '' Bossman '' Great work.
@JamesPretty
Ай бұрын
Thx David
One things for sure, ya definitely don’t have to go to the gym doin that. That is one thing I like about U an Chad, yall do ur own work on y’all’s rigs. Mad respect to ya Both Brother
@JamesPretty
Ай бұрын
Thx brother
Nice Saturday morning for you hope you’re recovering well from Covid
@JamesPretty
Ай бұрын
Doing well Tim
That's a lot of work but it will be worth it when it's done love the video
@JamesPretty
Ай бұрын
Thx nick
Good morning James the shovel trick work every time don't it good job bro
@JamesPretty
Ай бұрын
Sure does.
Good video again, James good job brother fixing. Krystal up the truck is looking good good keep up the hard work safe Travels on the airplane, captain
@JamesPretty
Ай бұрын
Thx bro
Morning James , Well check off one more pita job!
@JamesPretty
Ай бұрын
Mornin!!
Have you seen the wheel stud installer that is a bearing with an area for the lig nut to sit in. They work really good for installing studs and they come in a few different sizes.
@JamesPretty
Ай бұрын
Yep I’ve seen it. Should maybe get one
Good ideal using a shovel never tried that 😁😎👍👊
@JamesPretty
Ай бұрын
Works well Most of the time
@glennjeffers9692
Ай бұрын
@@JamesPretty I have tire bars that why I said it but awesome always learning something new
i remember liking heavy work like this. 30 years ago. glad that you still like it. i used to stack tractor tires for fun. farm tractor, rear tires.
@JamesPretty
Ай бұрын
Heavy work sucks
Those are a pain in the ass to do nice work James
@JamesPretty
Ай бұрын
Thx Ryan
Trucks going to be a power house when you get her done- I really like it
@JamesPretty
Ай бұрын
Thx Charles
Good job a little at a time . Thats how i do s lot things
@JamesPretty
Ай бұрын
Thx Bob
Man, that bottom bolt looked like it sucked! Now, don't laugh when I say this. I wear sweat bands when I work on my stuff my 46 year old ass works a sweat up just standing up these days, lolol. Appreciate the video. Great job!
@JamesPretty
Ай бұрын
Thx Rick
Man the heat is on!
@JamesPretty
Ай бұрын
Sure is
Try “quenching” it’s were you heat up a stubborn nut/bolt red hot and then quench it with cold water, I’ve seen even u bolts come undone useing this method,.and this was way before air/electric hammer gun/tools,.
@JamesPretty
Ай бұрын
Mmm ok sounds logical
they sell a bearing to pull in studs, the handle on your tire gun is 90 degrees off, i looked at my cat settings and your e model should be set to .027, buy a set of the swivel impact universal sockets for just this situation, if you anti seize the rubber mating areas it helps them come off later also, if you use this truck for logging it will need rebushed, how did the grease get on the brake shoe, not good. best of luck on the pivot bushing.
@JamesPretty
Ай бұрын
Are you referring to the Jake setting? If so it’s .030 for a 435 horse according to the Jake manual.
@youtubeisawesome2487
Ай бұрын
@@JamesPretty per cat manual its .027, the .030 is for a acert cat,. if they are weak reset if not motor on.
I feel your pain James you start doing suspension work you find quickly your working on a big truck keep up the good work
@JamesPretty
Ай бұрын
Thx brother. That’s a true story for sure
That shovel is a great idea
@JamesPretty
Ай бұрын
Works Good Thx bro
Good job James😊
@JamesPretty
Ай бұрын
Thx Robert
Nice workout😂😂
@JamesPretty
Ай бұрын
Thx bro p
Those parts are giving you so much hell it would be just as easy to make it an 8 bag air ride or even a pete 4 bag system...
@JamesPretty
Ай бұрын
I have an 8 bag cutoff but I’m not ready to do that
@tracymiller1881
Ай бұрын
It may sound silly to you but when you get ready (I know it sounds like a lot of work) un bolt the spring ride (here comes the work) weld all the extra holes that you don't need shut of course after you set the eight bag up and see what you can already use and drill to fit. I know it sounds terrible but it is a good way to do it.
@tracymiller1881
Ай бұрын
It beats cutting the frame if you don't have to.
Good beautiful Saturday morning y'all. Nice day to work on ol Krystal
@JamesPretty
Ай бұрын
Thx bro
Hi James, boy those were really in there. Looks like a workout. Krystal will ride better with those replaced hopefully the centers come out easier but I don’t think they will. Hopefully you get to feeling better. Stay safe
@JamesPretty
Ай бұрын
Thx bro
Hey James. I don't know if your interested in an ad I saw on Facebook marketplace but a gentleman in New Jersey is selling a couple of Marmon hoods. I'm not sure if they are in better or worse condition. I figured I would let you know considering it's not offen hoods for Marmon trucks pop up.
@JamesPretty
Ай бұрын
Appreciate ya
I’m new to your channel.lookin forward to some good content!thanks buddy.
@JamesPretty
Ай бұрын
Welcome aboard! thanks for being here
Belle vidéo 👌 😉. Sacré travail ⚒. Respect 😉 👌 🇺🇸 🇫🇷
@JamesPretty
Ай бұрын
Thx bro
@alaindunkerque59
Ай бұрын
@@JamesPretty 😉 👍 🚛 🚛
hi made it
Super video 👍👏🥰🇨🇿😉
@JamesPretty
Ай бұрын
Thx pavel
Never assume anything...never base anything on assumption ....just my thoughts and from my own experience..
@JamesPretty
Ай бұрын
True
Good morning that don’t look like fun
@JamesPretty
Ай бұрын
Not fun. Lol
Dude, the only time you seem to not mess with these old trucks it’s when your sitting in the left seat of that triple seven at 30K to 40K feet altitude on intercontinental flights, right? LOL I guess that truck addiction could be kinda like opioid addiction. Just as expensive but legal and much less self destructive, right? LOL
@JamesPretty
Ай бұрын
Hahaha 10/4
you need 4 hands
@JamesPretty
Ай бұрын
For real I do
👈👺👀👍
@JamesPretty
Ай бұрын
Thx bro
Good job i do things a little at a time
@JamesPretty
Ай бұрын
Me too Bob