Found this video from a forum. So I ordered the HID / LED “warning cancelers” off Amazon... hoping that fixes my issue.. they work great with engine off but don’t work with the engine on.. (flicker and go out like you said) Thanks for the video man. Very helpful.

@JustinKelly

5 жыл бұрын

I would recommend checking out my latest HID install. Much easier to install and works without harness or cancelers. Only issue I am still trying to figure out is slight light scatter which I think has something to do with the bulbs themselves.

I'm looking to install on 2005 ford excursion limited edition 4x4 projector lenses h7 low h1 high and 9005 fog now I'm looking for a ice blue or a medium blue also need relays I don't think I need resistors since it's before 2009 any suggestions between 35 watt and 55 watt I want brightest output but also best blue color I can get in the blue white range to medium only blue

Nice video. Appreciate the detail.

@JustinKelly

7 жыл бұрын

I try to be thorough as possible. Thanks for watching!

About to swap the 4300k HID D1s bulbs to 6000k ones on my Kia Cadenza, just seeing how blue 6000k looks on these vids. I want a newer LED look without being too blue.

thanks for your tutorial, very simple to install- 2016 Toyota Avalon. overall good value and great video.

@JustinKelly

7 жыл бұрын

Glad it was helpful!

@brandon68283

5 жыл бұрын

Hi Danny, did you need the relay and resistor kit?

lol you one of rarest one to do unboxing and installation on this model brand aye

@JustinKelly

8 жыл бұрын

Isn't that a good thing?

How do you know if your car needs a relay , and all that extra stuff in order to power them correctly .

Man, that looks nice!!

@JustinKelly

8 жыл бұрын

Yeah turned out pretty good but after the relay which wasn't really planned.

For a 2018 CR-V do I really need to use a relay harness ? Or should I just use one...

goodnight sir,i have a 13 buick verano and i recently bought a 55watt 6000k hid kit from the brand xentic any tips ??

great video mate ;)

Great video! Couple of things, the bit you need is called a step down bit to drill that big of a hole, also your close ups were a little blurry so hard to make out the print on the box.. But otherwise a great video! Thanks for taking the time to do it!

Hey man great video! Have a question does my Chrysler 300 2006 touring need a relay or canceller or can it just be done with the stock wiring? Thanks in advance! Keep up the good vids

@JustinKelly

8 жыл бұрын

+hugo rucoba Again as you have probably read from another comment I don't want to search all day but from a quick search there are mixed results with your car. If I were you I would buy both test without and if it doesnt work use it but if it does them return the relay. (Just make sure you can return the item) Sorry for not being a ton of help! lol

I put some of these on a veloster turbo. They look great, I'm suprised you didn't have to remove the headlights tho

@JustinKelly

8 жыл бұрын

Yeah the passenger side has plenty of room but the drivers side... yeah tight squeeze!

Do you still have your HID installed?

I got the same ones for my truck but the harnesses I have don't work won't turn them on or nothing I've had hids in low beams before, as you said they flicker and go out "before you had the harness" mine did that too, ordered the kensun hids relay harness without the resisters mine worked well without them, just the relay. could it be different manufacturers wire the harnesses differently? I still don't understand it. why my original ones I had before don't work "relay harnesses I had in previous hids"

@JustinKelly

7 жыл бұрын

Not too sure, most harnesses would be wired the same I would think but that could also easily be the problem. I would make sure everything is secure and if still no luck contact Kensun.

How's your vision at night compared to stock halogens? Is the light sprayed in every direction and effecting other drivers on the road? Many people flashing high beams at ya?

@JustinKelly

7 жыл бұрын

+Brandon T The vision is great! Only thing is these are probably in need of adjustment as they are low from the factory and I am also lowered. As long as you put these in PROJECTOR housings you'll be fine. Ive never had anyone flash me. Great mod to do just dont be that guy who puts them in reflector housings... :)

I really want more light, but I don't want errors codes or drill the dust caps since my car is lease. Sucks they don't have them as standard on new cars.

@JustinKelly

6 жыл бұрын

mextijuas5 The 2018 Elantra GT has optional LED headlights.

What brand is ur resistor u have?

What kind of cooler air intake do you have on your car? Do you notice a difference? I have a 2016 Elantra GT and debating if I should get a cooler air intake or not.

@JustinKelly

7 жыл бұрын

Brandon Oshiro I have a K&N Typhoon on it now and I dont know how much cooler the air is but it makes a great noise and looks cool!

Why take off white plastic ring??

i'm planing on installing these hid on my 2013 hyundai Sonata. do you by any chance would know if I have to get a relay as well?

@JustinKelly

8 жыл бұрын

I've seen some problems with the Sonata as well so I would recommend it. It definitely won't hurt anything and just makes them more reliable.

after 1 week of having my 55w hid kit on without relay one side died. is it because 55w uses too much power and it can only power up one? if i install the relay now will it work? like add the equal amount of power to both 55 ballasts? (straight up noob question)

@JustinKelly

7 жыл бұрын

Not sure TBH. If it worked for a week then you would think something else happened. A relay really wouldn't hurt trying if I was in your shoes!

seems like kensun has really gone downhill from my first purchase. ordered three sets of replacement bulbs and all three, ALL were the wrong color. The 5000k h9 high beam bulbs match my 4300k low beams. and the other h11 5000k bulbs for my fogs and lows were so blue, had to be like 8000k or 10000k. the h11 lows I bought were 4300k and is the only set that was correct.

@JustinKelly

7 жыл бұрын

Bulkbs Weird. I got 6000k as you know and everything seemed right color wise, maybe a tad towards 5500k is anything and that is after everything has broken in over the months.

I have a 1997 Toyota 4Runner! I'll put some 55W ballast with the 6000k color! It's gonna be bi-xenon so low beam and high beam will be HID! Do you recommend me putting a relay harness????

@JustinKelly

8 жыл бұрын

+Jesus Berrios Definitely more reliable!

Why can´t you plug your ballast directly to the factoy clip? I mean, insted of using another middle wire?

@JustinKelly

5 жыл бұрын

Because of the Canbus system in newer cars. It will sense that something is not quite right and turn power off to the headlights. The wiring with resistors tricks the computer into thinking everything is normal and also supplies the HID's with power from the battery. Stay tuned I should have a plug and play solution coming!

nice video man...I'm a new subscriber, I have a question, how much did you pay for this kit, thanks.

@JustinKelly

7 жыл бұрын

+JA VI I got it on Amazon when they had ones of their hourly or daily deals for I believe around $30-$35. So far it has been trouble free! Thanks for subscribing :)

@javi5377

7 жыл бұрын

+Justin Kelly THANKS for the fast reply ,and ok cool thanks again! keep it up!

Nice gt.! I have my hid kit 10k but look like 8k on my fog lights same car.. I used capacitors. Opt7 they are great. No relay need it.. Any ways.. I just wanted to know how bright or blue do you get on this ones on your car.. I wang something not so blue bug not so white.. What do you recommend..?

@JustinKelly

8 жыл бұрын

Thanks! These look just about pure white. Look great!

@JustinKelly

8 жыл бұрын

***** The higher the Kelvin the more blue that is added to the color. So 6500k is more blue than 6000k.

lifetime?

Looks nice! Do you have a shop in Chicago?

@JustinKelly

4 жыл бұрын

No I live in the Quad City area

Are these 55watt 6000k pure white or do they have a slight blue tint to them

@JustinKelly

7 жыл бұрын

Marc Tafoya I would say more pure white than blue but still look great and prove the best light output.

Have the same car and was thinking about getting these. You said you weren't amazed though. Should I get these or look for something better?

@JustinKelly

6 жыл бұрын

Joe Gorospe mine have been working flawlessly for 2 years now. Another Elantra GT owner recently tried the same kit with many problems. Seems they may have changed something or I got lucky. I may look into something else now with a couple better LED kits now available by Diode Dynamics.

@JoeG1015

6 жыл бұрын

I got a set of dual LEDs now in the projectors and really unimpressed w the light distance. Thinking maybe a 3 sides led. If you go Diode Dynamics Id like to see how well they work. For now Im just using sylvania silverstar ultra but want the led color back

@JustinKelly

6 жыл бұрын

Well Im waiting myself to see the actual output of the Diode Dynamics SL1 bulbs. Being released mid January I believe. On their Facebook they are having giveaway so maybe if you go comment yourself and tag me I can have the opportunity to test them and let you know :).

Will i need a relay to install this exact kit on my 2002 honda civic?

@JustinKelly

8 жыл бұрын

I believe it depends on the car. A relay may not be necessary but definitely won't hurt! I would try searching Google/forums to try to find out.

Too bad Kensun didn't put as much money in the HID system as they put into the fancy case.

@JustinKelly

7 жыл бұрын

Mike Penske I haven't had any real issues with them so far.

@GreyForrest

7 жыл бұрын

And i PROMISE you those cases aren't too fancy either!

@CadeKnight60

7 жыл бұрын

Justin Kelly do you know if a 2014 VolkswagenJetta needs a relay? I'm considering putting this HID kit in but wanna order all the correct parts! Thanks!

@neometalx9

5 жыл бұрын

Just go with ddm, morimoto or deautokey.. Those 3 are the best hids.

@radicalizedonline6825

5 жыл бұрын

@@JustinKelly Hey Justin , I'm in the market and I'm looking at getting this Kensun this week , can you tell me have you enjoyed them, have they failed on you, or given you any trouble sense you had them , any response would be much appreciated as I'm in side need to upgrade my headlights on my 2011 Crown Vic...

What did you mean by rotate 180 degrees? Which part?

@JustinKelly

7 жыл бұрын

Rotate the connector 180 degrees or flip it if it makes more sense that way. I believe you are referring to the connector that goes into the factory connection.

Would took out hid headlights blubs because they get really hot and they can burn back of your headlights. I would try LEDs headlights blubs in your car brother. Because LEDs have a fan on them and cool them down

@JustinKelly

2 жыл бұрын

I tried LED's and they had terrible output in these projectors. Most LED bulbs do have lesser output in projectors. The HID's never burned anything over the several years I had them.

@krammerstewart4739

2 жыл бұрын

Keep on your hid because mine melt back of mine foglighs and mine headlights

nice hyundai

HELP!! Where did you find that kit? I have the same car and everywhere I look they don't have my kit I need..Also quick question! Some of the kits I see say low and high beam does that mean it only comes with one bulb? I need two separate ones. Thanks for any info!

@JustinKelly

6 жыл бұрын

SoldierOfLove 85 The Elantra GT uses the high beam for DRL so you do not want an HID kit there. Low beam is one bulb yes. I'm not sure if they sell the harness anymore however there are many options for HID and even a couple decent LED anymore. Everything was bought on Amazon but I would check out Diode Dynamics and their SL1 LED.

@tndorrin79

6 жыл бұрын

Justin Kelly I'm always afraid to use LED lights because of how hot they get. What do you recommend I get that will last the longest? I do want the 6000k white lights. Last time I did this I didn't drill holes in the back of the covers for the cords to do though and I lost them.🙄 Do you have any idea where I could get replacements or do I have to go to Hyundai?

@JustinKelly

6 жыл бұрын

SoldierOfLove 85 Try EBay or I bet you could get the part numbers off an OEM website. I can check quickly. LED's usually stay cooler than HID's do although they both get warm. I would honestly recommend trying the SL1 first. I was suppose to get a pair to try but never did... 😕. I would still like the opportunity.

@tndorrin79

6 жыл бұрын

Justin Kelly I've never even heard of the SL1 lol! I know my bulbs are H7 and H11 and my fog lights are H11's as well. I just don't have a lot of money to spare so I want to make sure I get the right thing the 1st time around. The 1st time I did it I bought the wrong thing several times..🙄😖🤣🤔

@JustinKelly

6 жыл бұрын

SoldierOfLove 85 Low beams are H11. High beam/DRL H7. Fog lights are 881.

yea I plan on getting them how do I know if I need a relay or the canceler I want 55w but I want the color to look like the BMW or Mercedes come stock what u think would be good? 6k or 8k or just stick with 35w

@JustinKelly

8 жыл бұрын

What car you putting them on? I might be able to tell you. As far as color goes a 35w system in 6000k will look slightly "bluer" because it isn't as powerful. If I were you I would try a 55w system in 8000k if from Kensun. All brands are different but 800pk should give you a good blue.

@Gasani86

8 жыл бұрын

I wanna put them on my wife's new 2016 civic and I don't want to much blue just a nice tint of blue but bright? Wen u by the 55w do u need any special cables?

@JustinKelly

8 жыл бұрын

+Gezim Asanoski Fiund this thread, pretty interesting! www.civicx.com/threads/4500k-hid-on-low-beam-clear-white.1085/ Looks like you can use the factory wiring so no need for a relay. People on here also said about 5000k bulbs matched the LED DRL well but another went with a much bluer bulb, all personal preference. You should be fine with a 55w kit as the only difference is the ballast which supplies the power.

@Gasani86

8 жыл бұрын

thank u so much.

how do you know you need relay, is it when it doesn't turn on?

@JustinKelly

7 жыл бұрын

Usually when they flicker and shut off it is a sign that they car doesn't like them. Even if they work a relay is a safer, more reliable way to power them.

Nice work! What about the fog lights? Did you just cover with yellow sticker or something??

@JustinKelly

8 жыл бұрын

Thanks! The fog lights are just yellow vinyl wrap.

@spcexodus

8 жыл бұрын

+Justin Kelly Nice man, I like the look. They aren't super bright anyways so why not have a sweet look :p

@JustinKelly

8 жыл бұрын

+spcexodus Exactly! 😁

@CinnamonIce

8 жыл бұрын

+Justin Kelly I've got a black GT with a stock blue pinstripe and some of the leather inside is blue (black/blue edition I guess) - time to vinyl the fog's a blue color :D

@JustinKelly

8 жыл бұрын

+Dane Watson Dang! I really liked the blue leather! I wanted it but wasn't an option. It was only made for just over 2 years. (VERY few 2015's were made like that)

I don't understand why you needed Resistors? Did it come with Resistors? Does everyone need them? How do you know? Where did you mount them to and from?

@JustinKelly

8 жыл бұрын

Resistors help to stabilize the power and gets rid of any flicker (If you have any). You can buy either harness, one with and one without. If you need a harness you should look to see if you need one with the resistors before ordering, usually the forums can answer that question otherwise I would ask a professional. I mounted mine on the side, on metal! do not mount on plastic or other surface besides metal!

few questions man, 1) I prefer a pure white rather than blue , would you recommend the 6000K or 5000K? 2) have you had any problems with them ?

@JustinKelly

7 жыл бұрын

Thanks for taking the time to comment! 1. Thats a hard question because I have never experienced a true 5000k kit for myself and second I think my bulbs over time have became a pure white rather than 6000k. To be safe I would say a 5000k kit would be your best bet. 2. As you know I ran them with the harness and to this day I have yet to have them fail to turn on ONCE. They have always been there when I needed them which is a good thing.

What's up man, do you recommend Fanless led low beam headlights for the Elantra gt? Could you possibly ask one of your sponsors to send you a set and make a video about it , please ?

@JustinKelly

7 жыл бұрын

Bill Harris Honestly I don't recommend any LED in our cars. They simply don't have the output. Believe it or not I have tired them and they didn't work the best. Also wish it was that easy sometimes but it's easier for certain products rather than others. I'd wait until Diode Dyamics finally offers their SL1 to the public as that's is supposed to have great output.

@billharris3025

7 жыл бұрын

Justin Kelly as always thanks for your help

@JustinKelly

7 жыл бұрын

Bill Harris Sure no problem! Feel free to try a set yourself if you really want to try them however I just gave my opinion. If you have anything else you want answered just let me know!

So I bought the 55w 6k, the ones you have, would I be able to use my kensun 35w ballast for the 6k bulbs I, the 35w came from my kensun fog lights h11, they are the slim ballast. I just want the bluish hue with the 35w rather than the really white color with the 55w.

@JustinKelly

7 жыл бұрын

+Katsu LA I don't see why not, the output might just be a little (or a lot) less.

@neometalx9

5 жыл бұрын

There is no such thing as that, those bulbs are the same whether is 35w or 55w kit... With 55w kit, the bulb wears out faster and you'll have to replace it often.

I wanna order the same one as u where can I get it I was thinking order he hid kit too

@JustinKelly

7 жыл бұрын

jay lee Amazon should be your best bet. 55W 6000k, just pick your bulb size. Thanks for watching!

@snowrulz88888888

7 жыл бұрын

You can go to the Kensun website and save yourself a little money.

@JustinKelly

7 жыл бұрын

snowrulz88888888 Don't they charge like a crazy amount for shipping?

@snowrulz88888888

7 жыл бұрын

It's free shipping, just like amazon. Ordered mine last night. :)

@jaylee2835

7 жыл бұрын

snowrulz88888888 what about returning if it don't work ?

Very strange you still needed to add resistors after adding the relay harness. I also have a 2013 Hyundai Elantra GT and install a HID kit with a relay harness and have had no problems with the lights. the relay completely bypasses the cars power, so a resistor shouldn't really be needed.

@JustinKelly

7 жыл бұрын

It was recommended by Kensun with resistors in the first place so I did it like that. Never tried without them. Interesting point though!

What u use to mount the resistor?

@JustinKelly

7 жыл бұрын

3M automotive double sided tape

Would I have to buy a resistor or can I use the relay that comes with it?

@JustinKelly

7 жыл бұрын

jay lee Depends on your car. Some work great with stock wires, others need the harness. I would try looking online to see if people have tried HID's in your car.

I have a Mazda cx-3, do I need a relay?

@JustinKelly

8 жыл бұрын

+JERCHROME From quick searching on the internet, yes you will. Even if you don't it will not hurt anything and you can always test before installing the harness and if they flicker or go out you need it.

@JERCHROME

8 жыл бұрын

how much amps? 40? I plan on using 55W ballast with 6k bulbs. It seems to have more light output from my research.

@JustinKelly

8 жыл бұрын

JERCHROME No not even close typically 55w HID's use about 10-12 amps to "ignite" then shortly after run at about 5 amps. Less than factory Halogen bulbs.

@JERCHROME

8 жыл бұрын

really?? so you would suggest a relay with a 20A?? thanks so much!

@JustinKelly

8 жыл бұрын

+JERCHROME Any really should work that has the with connectors. If you going with Kensun brand just buy their relay but some cars require the relay with resistors as well.

does ur resistors get very hot

@JustinKelly

7 жыл бұрын

Terry Mustard Yes very hot after a couple seconds.

@terrymustardjr.8737

7 жыл бұрын

Justin Kelly nothing to do about this issue is there haha

@JustinKelly

7 жыл бұрын

Terry Mustard It isn't an issue but is more like a byproduct of more resistance in a circuit. Nothing can be done when adding resistors in this regard just mount to metal and you will be fine.

Good video but I had to stop the sniffles where braking my brain

@JustinKelly

6 жыл бұрын

Danny D Dont blame you 😂.

camara autofocus

He spent to much time on details, and not enough on substance. Grady Tatum..

@javi5377

7 жыл бұрын

or maybe you're slow and didn't get it the first time!

@shwt121

6 жыл бұрын

I appreciate the detailed instructions & I do think that mentioning 'do not touch the bulb' several times will get it thru some people's heads......

@shwt121

6 жыл бұрын

I take it since I, too, have an Elantra, that I should either remove the fusebox or deal with working around it......okay, I get it- thanks.

@shwt121

6 жыл бұрын

Justin, try to get your work closer to the middle of the frame on your camera....when you were routing the wires thru the dust-cap hole - half of your hand was out of the picture......