I just bought a Sub 2000 Gen 3 this weekend, I haven't even fired it yet. I'm excited to get out there and try it out.

@Scott67

Ай бұрын

Nice. Have fun, be safe.

Thanks for this review brother. I had a gen 1 and I loved it. Wish I never sold it.

@Scott67

3 ай бұрын

Your welcome and thanks for watching. I almost bought a Gen 2 as KelTec been offering a 100 dollar rebate. Just before buying I saw the release of the Gen 3.

hy do you shoot this with the setup you have....???? its a backpack/truck gun

@Scott67

2 ай бұрын

For now it's in a soft case in the trunk of vehicle. Summer will probably take it out and stick with my edc only.

How does red dot lose zero when opening and closing? It's attached to the barrel half, just the firing pin and breech face are on the rear half.

@Scott67

4 ай бұрын

I zeroed day 1. Day 2 I was able to hit paper but was off bullseye by a few clicks. Day 3 was the same. My thought is there's the slightest bit of play somewhere in the locking system. Or maybe it's just how much pressure I hold on the gun.

I hope to see you out there, Okay Corral is my place to go! Maybe you can give me a couple pointers.

@Scott67

4 ай бұрын

That would be cool. Give me a shout if you see me.

Why does having to slam it open affect the zero and the recoil don’t? The reason I was asking I’m looking to buy one and would hate to have to zero it every time I opened it. Could it just be the red dot sight you’re using?

@Scott67

Ай бұрын

I think the issue is that there is the slightest bit of wiggle in the hinge' So unless you have it marked it's not going back to the exact same spot. My opinion is wasn't made to be a precision shooter. But it is good enough to stay on paper. Keep in mind also this could have been just the gun I was shooting.

Thank you for posting a review. How far off was the point of impact change when you fold and deploy the Sub2K?

@Scott67

5 ай бұрын

Thanks for the view, Average 2, 3 inches at 25 yards.

@lucashoward6120

5 ай бұрын

@Scott67 I'm interested in a Gen 3, but that's more poi shift than I would be comfortable with.

@Scott67

5 ай бұрын

@@lucashoward6120 I understand.

@blackmagiic00

2 ай бұрын

Mines right on the money every time.

Thanks for the review sir, what is the suppressor you were using? Was there a mod to put it on?

@Scott67

3 ай бұрын

Your welcome and thanks for watching. I was using the Sig Sauer SRD9 suppressor with a 1/2 x 28 piston and a fixed barrel washer. I simply just screwed it on.

Yeah the manual on the g1 mentions not to use aluminum cases. Its designed for brass only. Im pretty sure it the same on g2 and the "g3".

@Scott67

3 ай бұрын

The manual for the gen 3 only says - "The SUB2000 is a semi-automatic rifle chambered for the 9mm Luger cartridge". A friend of mine reached out to Kel tec on the Gen 2 a while back and there response was "Aluminum cased is not unsafe unless it's Plus p ammo. Only brass cased is recommended".

Nice video what was that magnification scope thing you had for your phone that’s a awesome idea. thanks

@Scott67

3 ай бұрын

Thank you. "Scope phone adapter" came with the scope. Cool thing is you can zoom even more with your phone.

@ChrisWojnarski

3 ай бұрын

@@Scott67 what’s the name of the scope that’s cool

@Scott67

3 ай бұрын

@@ChrisWojnarski Amazon - "MaxUSee" High Definition 20-60x60 Zoom Spotting Scope with Tripod Carry Bag Phone Adapter. . Price has gone way down at 44.00. I paid 59. 4 years ago.

good review what distace did you use to zero? how much hold over did you have to use ? or how big a drop was it at verious yardage thank yooou Sir

@Scott67

19 сағат бұрын

Zeroed at 25 yards with no holdover at 40. I also shot steel at 50 but don't remember if I had to make self adjustments.

Best to avoid aluminum cases in Blowback guns. They do not expand like brass and steel and lack the structural strength so there is more likelihood the case will release from the chamber and hang un supported while pressure is still too high from firing that round and kaboom the Gun. Guns with some sort of locking lug design are more likely to be OK with it because there is a mechanism there to keep the action closed until pressure is down.

@Scott67

3 ай бұрын

Thanks for the information.

@chippooutdoors5325

Күн бұрын

@@Scott67 have been watching several videos on the 2000,, I believe alum ammo has written on box not for carbines ???

What brand and model of red dot sight were you using in the video?

@Scott67

4 ай бұрын

Sightmark Core A-Spec Reflex Sight

@zackstrong8034

4 ай бұрын

@@Scott67 Thank you!

Where can I find that compensator?

@Scott67

4 ай бұрын

KAW VALLEY PRECISION 9MM XL LINEAR COMP

Pretty sure it says right on the website NOT to use aluminum cased ammo. Regardless it looks really fun to shoot. My question is how sore are your shoulders after shooting 200 rounds 😂 Also what if you just ran a laser on it in addition to a Red Dot?

@Scott67

5 ай бұрын

Hi Sir. The manual only says - "The SUB2000 is a semi-automatic rifle chambered for the 9mm Luger cartridge. A friend of mine reached out to Kel tec on the Gen 2 a while back and there response was "Aluminum cased is not unsafe unless it's Plus p ammo. Only brass cased is recommended". Now to your questions. My shoulder was not sore at all. It does kick more than I like and you learn pretty quick how firmly to hold the gun. As far as sights, it depends on your needs. For home defense and fun at the range, a red dot and a laser is a great combo. For "bugging out" I would want a red dot and iron sights. Hope this helpful.

Any one have any issues with the buffer pad getting squeezed inbetween the buffer tube and folding lock

@Scott67

4 ай бұрын

Not here

@blackmagiic00

2 ай бұрын

Yes. Had a new end piece 3d printed. Keltec wanted me to send my gun back and I didn’t want to. I’ve shot 150 rounds since the new piece and no issues.

i have the sw fpc i love it i hope sw or keltec make a folding pcc in 10mm which ever one does is getting my money lol

@Scott67

5 ай бұрын

I would like the FPC or Response from S&W. I think a best chance of seeing a 10 mm is going to come from S&W.

@charlesjames5477

5 ай бұрын

hell yeah@@Scott67

Waiting for the other colors other than black, then getting one for tacticoolness.

@Scott67

4 ай бұрын

I don't know why they did not do that out of the gate.

Does it have last round bolt hold open?? Please respond? Thanks

@Scott67

5 ай бұрын

It does not.

@roadking681

5 ай бұрын

In that case to me its worthless. thanks for responding @@Scott67

@not-AI

5 ай бұрын

How many 9mm ARs have this feature?

@Scott67

5 ай бұрын

@@not-AI Only other one I know of is the Smith & Wesson M&P FPC

@roadking681

5 ай бұрын

@@not-AI the Smith & Wesson one does my freedom ordnance does and from what I remember the ruger's do as well.

maybe set up your phone on the other side next time lol

@Scott67

4 ай бұрын

The goal was for the viewer to see.

@dereckc9469

4 ай бұрын

@@Scott67 thanks, I laughed every time a shell hit it!

@Scott67

4 ай бұрын

@@dereckc9469 I never paid it any attention till you brought it up. Made me laugh as well.

A bipod on pcc is the most fudd thing I’ve seen in a long time

@Scott67

4 ай бұрын

The goal is to show how good or bad the gun is with as little human error as possible.

I think the gen 2 is way better

@Scott67

2 ай бұрын

I haven't shot the Gen 2. Care to share why?

@TruthGotGunz

2 ай бұрын

@@Scott67 I’ve seen videos of the gen 3’s cracking where it rotates, which I knew would be a problem…and where the magazine inserts