I'm impressed. You put a lot of thought into you kegerator. Very nice job.

Great job I like the use of the foam!

@travisadventureprojects4578

4 жыл бұрын

It seemed to simple a solution to work well but its pretty incredible just how well it works!

Looks great! Thanks for the video. Cheers!

@travisadventureprojects4578

3 жыл бұрын

Thanks for watching!

As Ryan C said, use a forward sealing tap to stop from sticking. Would also suggest tap plugs, to prevent insects and especially fruit flies from crawling up into the tap.

Great project idea...I've just completed a "mancave" and want to move my lanai kegerator into it...this would be a good project...especially adding the additional beverage cooler

@travisadventureprojects4578

2 жыл бұрын

2 years in I still love it! I get complements on it all the time when people are over.

Switch your taps to ball lock style and the sticking will be fixed

you need a forward sealing tap to stop from sticking

@travisadventureprojects4578

4 жыл бұрын

I'll have to look into that!

Easy solution to the sticky tap issue, just drink more!

@travisadventureprojects4578

4 жыл бұрын

A beer a day keeps the sticky tap away!

How did you build the seal between the fridge and counter top?

@travisadventureprojects4578

4 жыл бұрын

kzread.info/dash/bejne/qahmucF-Y8uuprQ.html Here's the video where I installed the kegerator into the cabinet. I walk through how to make the seal.

How did you handle ventilating the coils when the kegerator is in the cabinet? Does it overheat?

@travisadventureprojects4578

4 жыл бұрын

There is no back to the cabinet behind the kegerator so air can pass through. There is also 2"-3" on all sides to allow air to circulate. No overheating issues!

Did you say you got it from kayco? I’ve replayed it but I can’t quite hear what you said

@travisadventureprojects4578

2 жыл бұрын

I ordered mine from Costco

Do different brands of kegs have different connections and pressures? If so how do you over come that?

@travisadventureprojects4578

3 жыл бұрын

For Corny kegs there are 2 styles, ball lock and pin lock fittings. Homebrewers use both styles of fittings basically you just want to choose a fitting style and stick with it. It seemed to me ball lock kegs were a little easier to come by so I went with that style. As for pressures if you have a single regulator with 2 lines like I do you can only set one pressure. You want to find a good serving pressure for your system so you can pour, but not have it blow a bunch of foam out from to high of a pressure. That pressure is usually around 8-15PSI depending on the lengths of your hoses. This servings pressure will keep your beer carbonated as once it reaches an equilibrium it will be holding as much CO2 as the beer can at that temperature.

@RetroRod-im6tl

3 жыл бұрын

@@travisadventureprojects4578 cool. I think I might have screwed myself.i have granite for top of bar. Can you run the lines at a 90° and mount the tower on top somehow?

@travisadventureprojects4578

3 жыл бұрын

@@RetroRod-im6tl that's a good question, I'm not to sure but I'm sure there would be a way to do it!

Did you need to shave some foam to fit a second keg?

@travisadventureprojects4578

11 ай бұрын

It actually just fit without shaving any foam.

@dannyzwolf4546

11 ай бұрын

@travisadventureprojects4578 Thank you for the reply. It's good to hear because I just bought this fridge. I plan on putting the taps through the door.

/can i use this just for sparkling water?

@travisadventureprojects4578

2 жыл бұрын

I would think you could carbonate water just the same as beer in this setup. I haven't tried it but I bet it would work!

@olene184

2 жыл бұрын

@@travisadventureprojects4578 thank u!