Found ur video as I have that exact unit “on the way”. Appreciate the the step by step, explanation. I’m ever excited!

I love my 2 tap edgestar kegerator. Best fathers day gift ever thanks to my son and my wife!!!

This video could not have been more perfectly timed. I had ordered the 4 tap version of this kegerator and watched this video (twice) and was able to tear into that thing today and set it up in about 30 minutes. This was so well done that once finished I realized there were no instructions included in my unit. No need. One difference was the tower kit I had to assemble did not have the mounting flange and escutcheon allowing for the screws to be tightened with ease from the outside. I had to reach down inside the tower and blindly thread and screw the fasteners down. Talk about using The Force.....

Thanks! You just helped me build mine.

This video came out at the perfect time! Woooooh! 🍻

@GenusBrewing

3 жыл бұрын

Perfect!

Wow this was super helpful thanks🍻

@GenusBrewing

3 жыл бұрын

Glad it helped!

I rebuilt my kegerator lines recently (an older version) the first time I did barbs and this time I did duotight fittings. The first time with barbs involved alot swearing and sore hands. The duotight rebuild went smoothly. Assuming they hold up I don't think I would do barbs again.

Fittings are also called pushlock just get the liquid rated ones and you can also get them stainless. you can use good Teflon paint lines(there're food safe) and basicly get any size

Thanks for the video! One question I have is after you feed the gas line through the port in the back of the kegerator, is there any type of gasket or something to help seal that hole? The port looked much bigger than the gas line so I would think there would be quite a bit of cold air lost through there?

Well made video Pedro.

@GenusBrewing

3 жыл бұрын

Thanks!

I've seen sanke connectors with ball posts on them so you can use any keg without having to swap connectors on your lines. Just pop the ball connectors on and get 'er done.

I aquired one of these used. Seems to be running good. Does the fan cut off and on with the compressor or is it always on, always off via the switch?

Does this fridge have a internal light that comes on when door is opened?

Is there a kit to install this into a bar top where the tower is not attached to the kegerator?

Do you need to sanitize the liquid lines?

Helpful

Can someone provide the sizes and types of fittings to purchase outside of what comes with it? Thanks, AJ

How do Ireverse the door?

Have you tried using boiling water instead of a heat gun on polyethylene lines?

This channel popped up in my feed, I resisted watching for a while because I thought it said genius brewing. After watching a couple videos and realizing there was no genius involved I'm now really enjoying the channel. Keep up the good work.

@GenusBrewing

3 жыл бұрын

We meant to be genius brewing but we spelled it wrong :'(

@Holdmuhbeer

3 жыл бұрын

@@GenusBrewing all the more fitting, it would seem.

Do you still recommend this kegerator?

I see the UI and Gonzaga flags, are you local to the Palouse?

Hey guys, love the video. I'm in the process of setting mine up right now. What length liquid lines would recommend? 5 ft per keg?

@GenusBrewing

3 жыл бұрын

If it's poly line like in this video a little over 5ft is appropriate- 6 ft should be perfect. If it's vinyl 4 ft

This is literally the exact same unit as the keg king, except I got the 3 tap version.

Where do you recommend installing a secondary regulator inside the Komos v2?

@GenusBrewing

3 жыл бұрын

Ours we put on the inside left wall

I have a kegerator, I just want that tower cooler. Wish I could just get that.

@jfdoherty3448

3 жыл бұрын

Garry Spencer you can buy aftermarket tower coolers. Got one off amazon and it works awesome!

What is the diffrence between the kegland kegerator X and the Komos kegerator?

@theinterneter

3 жыл бұрын

I have the keg king brand and it's basically exactly the same, it just came with clamps instead of duotight fittings

@GentleGiantFan

2 жыл бұрын

According to Kegland, Komos is just More Beer's name brand for their kegerators. Besides that, they're identical.

First!

You guys around eastern WA?

@GenusBrewing

2 жыл бұрын

Yes - Spokane!

Nice information. Thanks #STAYSAFE

Do you guys sell these?

@GenusBrewing

3 жыл бұрын

Yes we do!

@Texaviator

3 жыл бұрын

Genus Brewing awesome what’s the details for a dual tap?

LAST!

@GenusBrewing

3 жыл бұрын

Noooo!

We haven’t been able to find a freezer for a keezer build since COVID panic hit 😓

@dennisschickling5759

3 жыл бұрын

Home Depot has a lot of them. In Bensalem Pennsylvania. I would think more Home Depot has them also. Good luck. #STAYSAFE

@lonewolf9390

3 жыл бұрын

All I want is a mini fridge big enough to use as a fermentation chamber/kegerator. None to be found within a 250 mile radius of my ZIP code! It's crazy.

@dennisschickling5759

3 жыл бұрын

@@lonewolf9390 😢

@cmcurran5

3 жыл бұрын

i only built one because of covid lol

@RichardCockerill

3 жыл бұрын

i have no money..but i do like peanut butter....a lot

Go cougs

Step one - throw away half the parts

I so hate to offer a critical comment because I love what you guys do. But... buy a $30 boom pole for your mic. Will allow you to use both hands during assembly, enhance the video's overall appearance, and wait for it... increase social distancing. Again, sorry.

@ForgetU

3 жыл бұрын

Look these guys can't even spell, wait for it... "genius". They are beer guys.

Second

This thing is a piece of shit. Use those interlock connections that just come loose and spill beer everywhere!!! Cheap garbage 0/10.