KC Cyclones as Chase Lights - Jeep Wrangler JL
Автокөліктер мен көлік құралдары
Join us as we walk you through installing the KC Cyclones as chase lights on Mambaflex
KC Cyclones V2: www.kchilites.com/cyclone-v2-...
Amazon Extras:
50ft PET Expandable Braided Cable Sleeve - www.amazon.com/dp/B08D3RXL7T?...
Wirefy Heat Shrink Tubing Kit - www.amazon.com/dp/B089D82FLG?...
GS Power 100% Copper 20 AWG (American Wire Gauge) Stranded Red/Black 2 Conductor Bonded Zip Cord - www.amazon.com/dp/B0791B4ZRW?...
Пікірлер: 27
This guy is ONLY in my right ear
great video and great idea!!
@TrailMade
Жыл бұрын
Thanks a lot, we really appreciate the support!
Nice job bro!! Looks good!
@TrailMade
Жыл бұрын
Thanks so much. Looking forward to seeing these in action out at night!
Great video bro!!!
@TrailMade
Жыл бұрын
Thanks a lot, we really appreciate the support!
Love this, could you have tied into the tail light/ brake lights/ turn signals?
Nice tutorial!! Question, how did you get the wiring from the glass door thru the water seal strip?
Great install video! Do you have information on the screw you used, btw?
🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽
@TrailMade
Жыл бұрын
Thanks a lot Johnny!
have been wanting to do this! what screw did you use?
Great video. I’ve been wanting to do exactly what you just got done doing in this video. Very nice. My key question is what connector did you use to disconnect the wires when you took your top off? Thanks.
Nice job. Would been cool to show the finished wiring at the hinge.
@TrailMade
Жыл бұрын
Thanks so much for the feedback! We can definitely post a follow up video showing the wiring in more detail!
what screws did you use?
So when you pull over and open your window the lights point up?.
What did you hook them up to to get them to flash/strobe? I want to hook them up to a Voswitch JL400, if I can get the flash to work.
@TrailMade
Жыл бұрын
Thanks for the support! These were hooked up to the sPod Bantam x
What happens when you take the top off? Do you have to unplug it all?
@TrailMade
Жыл бұрын
You can install a quick disconnect on the power line between the lights and where the wiring starts getting hidden under the carpet. When the top comes off, simply unclip the disconnect!
Just make these and sell them as a complete kit.
@TrailMade
Жыл бұрын
Not a bad idea right here 🙌🏼
Are you talking, sound is all over the place.
@TrailMade
Жыл бұрын
Thanks for the feedback 🤘