Yoshimura pipe sounds good and proper like how a inline four should sound. Growing up in the '80s I'm partial to i4 engine and not too hip to parallel twin sounds.

Still super happy with the bike Chris. Just rides epic. Glad to see the really positive feedback on the feed. Outstanding work by you and the crispy team. 💥🏍️💥

When I was a boy, a long time ago, I had a 1977 Z1000 with a lovely aftermarket 4 into one (vance & haynes) with a large baffle. Late one evening, I was making my way home on a country highway when the last bolt holding the baffle in place must have sheared through and fallen out, followed shortly thereafter by the baffle. It was like an instant switch in sound from healthy litre bike at 6,000 rpm to steroid abusing semi truck at 120 decibels or better. I did find the bafffle and discovered another benefit of using loctite when doing the repair.

From a guy who has a 2004 Z1000-very basic, but a sweetheat of a bike, and dyno'ed at128.8HP, only 498lbs, so, it goes well and eveen an old guy like me can pick it up-this is the closest I've seen to replace my baby. Again, Cheers from the Pacific West Coast of Canada.

Love that Yoshi.... without baffle please.!!!..old school like mad Max...and the green.havent seen that n the US. ....sure miss my 84 red GPZ 750 w Yoshi 😭

Just watched this video with the CC subtitles on (English Auto). The bit with the bike running up and down on the dyno (17.26ish) comes up as MUSIC then APPLAUSE. For a Zed900rs it says it all really.

@crispysmotorcycles

Жыл бұрын

Haha! Yes indeed it does! 😎👍🏻

Nice video! Bike sounds awesome on last dyno test! 👍

Loving it Chris👍 Awesome video. Really nice having the blip down clip and some nice full pulls up through the box. Plus the new pipe sounds really good too.

@crispysmotorcycles

Жыл бұрын

Was crazy loud without the baffle dude! 😅

Excellent vid. Well Done! Indeed the only video out there at trying to squeeze out more h.p. from this scooter

awe man i love the snarlry old school sound

Excellent work, great bike, oi oi oi

That exhaust is totally bad ass! I think the Dale Walker AirBox mod might help w a few more ponies! Damn excellent little vid. Wish you guys were local!

@crispysmotorcycles

Жыл бұрын

Thanks Chris! Yes we did discuss airbox mods with the customer. Possibly something for the future 😊

Great video. Thanks.

Stunning bike 🏍️

Love the way Zeds still sound like they want to eat your leg off! Great watching the tuning process. Nice work Crispy.

👍good work

Good work! I mean I've already got my heart set on one of these but finding decent tune videos isn't as common as you'd think! Appreciate this a lot! *subbed*

Harley has been using CanBus since 2012ish, its an easy system to learn, with the right tools of course

Dale Walker USA (Holeshot) did an excellent exhaust,airbox, module tune and gained around 18ftpounds torque a quite a few more ponies. Thanks for your efforts on the 22 model and like the Yoshi pipe. Will you try the Delkevic decat header and or the 4 into 4 for interest sake with stock maps and air filter. It would be great to see before and after. Z900 rs Cafe rider Adelaide Hills South Australia!

@crispysmotorcycles

Жыл бұрын

If we get one in Craig, I’ll be sure to share it . Thanks for the comment 😎👍🏻

all the yoshimura diciples wanna know... can you add the yoshi cams and still do all the changes via ECU flash? and if not what other mods are required ?

Just seen my ZX6R rear wheel at the end of the bench..just proves it's a new video.😂😂... fantastic video..pity you were a bit quick showing the Dyno map..old fart like me couldn't see the figures....bike sounds the dog bollocks..😂😂

@crispysmotorcycles

Жыл бұрын

Here you go Rick 👍🏻😆 Before - 98.2 bhp 62.1 ft/lb torque After - 110.1 bhp 68 ft/lb torque

@UnrealButcher

Жыл бұрын

Pause is your friend. lol. I know I had to.

Love the old school Z900's these new ones are really nice old/new school tribute to them - That exhaust is a great choice sound epic totally agree " Loud pipes save lives " 😎👍 Great video new sub here ride safe guys

The fear that struck me when I saw him grabbing the exhaust baffle by the fiber glass without any protection

Music to my ears fellows. A Yoshi is a must have no doubt about it and maybe chop a third off the baffle for extra joy 😂

Jessie Pinkman, is that you?!!!

when you downshift do you rev and clutch and downshit at the exact same time when downshifting?

@crispysmotorcycles

Жыл бұрын

Hi, yes pretty much. I also find it helps if you are smooth with the clutch 👍🏻

@TopshelfJunior

Ай бұрын

You don't HAVE to do it the way he was in the video, although the way he was doing it was spot on and SWEET ! But on the Z900 especially, you can pull the clutch in, kick it DOWN a gear, and slowly let out the clutch...and the bike will still be smooth as butter. I don't know what it is on the bike but, moving between gears on it is a breeze, up and down, always smooth.

Is this exhaust street legal for european countries? cann it be homologated for lets say germany?

@crispysmotorcycles

Жыл бұрын

Hi, the exhaust isn’t marked “not for road use” and with the baffle isn’t crazy loud so I can’t see a reason the Police would be interested and it’s quiet enough to pass an MOT. Here in the UK 🇬🇧 anyway 😎👍🏻

@petraklavcic6196

Жыл бұрын

@@crispysmotorcycles must be homologated. The police will not mesure, but will ask for homologation papers. So I think this pipe is not legal in EU. In Slovenija not.

Does it have a quickshifter for upshifts? Or you're just going clutchless?

@crispysmotorcycles

Ай бұрын

No Quick-shifter on this one, just old school clutchless gear changes. 👍🏻

@colinoz

Ай бұрын

@@crispysmotorcyclesDidn't think so. Just looks like it clicks into gear nice and easy!

Crispy I want to make a logo design for you for free, had some cool ideas if you are interested!

Is the 2022 euro5

@crispysmotorcycles

Жыл бұрын

Hi there, Yes it’s Euro 5. This model is using Can bus and not the typical K line communications 👍🏻

@satur9satur9

Жыл бұрын

@@crispysmotorcycles is there a change in what you need to tune it.

I just put rocket blasters on mine.

@crispysmotorcycles

Жыл бұрын

Actual rocket 🚀 blasters? 😃

@MrPepper312

Жыл бұрын

@@crispysmotorcycles joking...

@crispysmotorcycles

Жыл бұрын

@@MrPepper312 I think this could be a potential modification 😃🚀

What where are u located

@crispysmotorcycles

Жыл бұрын

Uk 🇬🇧 👍🏻👍🏻

I would never make any changes to my Zed that made her at all louder. Running in "just a whit under open headers" mode is a really poor decision, imnsho. To each their own.

@alexpryce555

Жыл бұрын

Modern bikes run lean and hot to comply with emissions standard's. Nothing else. Free flow filter and exhaust, and then a proper Dyno tune is the best thing you can do for this bike.

Lol it’s about as loud as my 1984 Kawasaki GPz 550 is 👍

With a good remap/flash, that yoshimura exhaust should push 135hp to 12krpm from or 100hp 10krpm. Me, no baffle😅😅😅😅

@crispysmotorcycles

6 ай бұрын

135 bhp from a remap? That would be impressive…. The RS is a different beast to the Z 900 but with different cams and a remap you’d be closer. Check out - kzread.info/dash/bejne/gmGYx8WGnNHUlrA.htmlsi=W20PIXmf1qxWsZh5

@switchblade762x51

6 ай бұрын

@crispysmotorcycles yoshimura cams, are different. With them, the yoshimura hand bent superbike pipe, Archi and a few other jdm companies are pushing between 130 and 135. If you add in the high compression pistons heads etc($3k) you get closer to 150hp. JDM just does it better

@crispysmotorcycles

6 ай бұрын

Yes you would definitely need to do engine mods to get those kind of numbers, not just a flash and exhaust. Baffle out was 😳😳😂 Thanks for commenting 👍🏻

That exhaust is TFL! for daily riding.

(sorry: Jesse!)

Original is 111 Horse Power can’t be 98 this is to faar away, just not possible!

@crispysmotorcycles

Жыл бұрын

BHP was measured at the rear wheel. Crank figures will be higher. 👍🏻 motostatz.com/kawasaki-z900rs-top-speed-acceleration/

@SKG1941

11 ай бұрын

Put a Brock’s exhaust system and ECU flash on my Z 900 RS and it’s putting down a little bit over 100 hp to the rear wheel. So……

That exhaust is ugly- I bet it would be good on the kawi green 2019 ones - but it doesn’t fit that paint/ chrome grab bar

@crispysmotorcycles

Жыл бұрын

I guess beauty is in the eye of the beholder. 😎

@thinkingimpaired5663

Жыл бұрын

@Crispy's Motorcycles - MOT, Dyno, Servicing, Remap I remember when every performance exhaust was flat black. We had much more freedom back then as well.

@crispysmotorcycles

Жыл бұрын

@@thinkingimpaired5663 yes. I was born in the 70’s and don’t remember much about health n safety back then, just lots of cuts, bruises and laughter with mates!

Now that you have the map, the next flash costs you basically nothing, right? You don't mention anything about the O2 sensor. Did you disable that and advise the customer to unplug it? You should also plug the hole left behind in the air box after removing and plugging the hose. Cutting out the divider inside the airbox is also another mod people do at the same time. Changing the air filter practically makes on difference (+1 hp maybe?). New exhaust, filter, airbox mod and tune should get 20hp more.

@crispysmotorcycles

Жыл бұрын

Hi Malexder! The flash costs as long as it takes me to do it. If it’s the same bike with the same mods I can apply the same map but personally I’d like to run it on the Dyno and check everything. Yep, I disabled the 02 sensor and unplugged it. 👍🏻 No need to plug the air box hole as I’ve tuned the bike to run without it. Pair valve is now blocked off. Yes performance air filter makes small gains but some people prefer a lifetime filter that can be maintained. This one made an extra 12 bhp peak over stock but the Euro models tend to be less restricted. It’s not just about peak power figures tho 😉

@seanryan936

Жыл бұрын

Chris, well a few more thousand miles on the bike since the video. Still totally loving the bike. It's just so much fun. Thanks mate. Good to see all the positive comments. You did a great job. Be over soon to get the ECU Flashed. 🏍️💥 Sean

That exhaust does not say Yoshimura. It says "Racing Spirit". It is a cheap chinese POS exhaust.

@crispysmotorcycles

Жыл бұрын

Interesting Ron. We didn’t supply it so I can’t shed any light on it, but I know the customer paid a lot of money for it. It does say Yoshimura underneath “Racing Spirit” if you look closely at 7:03. Link here - www.performanceparts-ltd.com/media/news-archive/yoshimura-japan-products-for-the-kawasaki-z900rs-cafe

@seanryan936

Жыл бұрын

It's genuine Yoshimura. No Chinese small animals were killed making this exhaust. 👍

What a shame, ruining that beautiful nostalgic exhaust note with this farting in a pot exhaust sounds!!!

@crispysmotorcycles

Жыл бұрын

It was quiet as a mouse with the original exhaust and cat still installed. Nothing like the original Z 900 roar. 😈

@sleeper.simulant7327

Жыл бұрын

What are you on about? It sounds amazing with this exhaust setup, the stock setup sounds like a quiet sowing machine…