Sick build !!! My brother in law and I built a 2006 si for his son 16 Bday. We used Brian Crower Stage 2 Cams, spring, retainer. With a used 2.4 shortblock. Ebay header & 3 in exhaust. Stage 1 clutch and light fly wheel with Hondata Flash pro for tuning. He has it where limiter is 8400 rpm. We were expecting 200-215 whp We did 3 dyno pulls 232, 235, 238 whp all at 7900-8100 rpm. As a joke coming back from getting it dyno tuned. I was driving and raced his 18 rt charger thats Full bolt on with a tune. The 2006 si Walked the shit out of the Charger till about 100 mph then stayed with in a car length at 135 mph. We both joked that we deff dont tell his son the civic faster. We got a rod knocking 2006 si for $1500 , spent about $3500 total in parts. Im a Mustang Guy. Brother in law is Die Hard Dodge/Subaru. Its Crazy for less then $5000 his son will have a car capable of hurting alot of feelings.

I love this build so much, inspired me to get an si for my first car and can’t wait till I understand all the car talk cause for now I don’t know much but the basics like changing oil and anything else it needs. Hoping to learn how I can make this a beast like that monster you got💪🔥

@wilok2497

2 жыл бұрын

I know you can do it💪🏾

@nathantowle8806

2 жыл бұрын

I got my Si about 6 months ago, and it was my first "sporty" car as well. They're fun but not too crazy to take care of and handle. I love mine. You'll learn lots bro!

@italicizedhunger4450

2 жыл бұрын

i can assure you, engines are very easy to understand

@italicizedhunger4450

2 жыл бұрын

@@nathantowle8806 just got my 09 last week coming from an 08 g37 and gotta say the si is so much more fun to drive lol

@macbdo

Жыл бұрын

Best advice I ever got was " its just nuts and bolts, if they come off they have to go back on" don't over think it and take your time and keep up with whatever you take off and you'll be fine buddy , just don't play with the timing once it's off your fucked if you don't get it right the first time

That things pulls!! That makes me regret selling my fg2

@wilok2497

3 жыл бұрын

Thanks, isn’t the faster but many people get confused about 4 doors sleeper

just bought a takeda stage 2 intake, ktuner v2, full magnaflow exhaust for my 8th gen k24z3 accord

@Thacreator22

Жыл бұрын

coupe

Damm i miss my fa5... Super nice bro.

Can't wait to buy my si next week running a similar setup but fully built

@wilok2497

2 жыл бұрын

Let me know when you finish it

@gotdammit

2 ай бұрын

So how's she goin'?

Wow, she is makin some power

@wilok2497

2 жыл бұрын

Thanks

😍😍 amazing power. Sounds great to. Looks like my car.. #FA5

@wilok2497

3 жыл бұрын

Thanks

To make the headers fit did you need to bang the firewall at all? Or did you used more spacers to make it clear? I’m loving your setup. I was thinking of going turbo or sc on my k20z3 but a Frank build with bolt on N/A is the way to go.

@wilok2497

2 жыл бұрын

I use the spacers on the mount and clear perfectly. Thanks, i like the sc for daily drive.

@rastafire1219

2 жыл бұрын

@@wilok2497 it is going to be my DD, would you recommend a SC than a Frank? I have 155k on the motor right now.

@wilok2497

2 жыл бұрын

Which one you pick is good dd, the only thing is how aggressive you want the car. I will say allmotor with 300hp, sc with 450 or less is good

jesus christ how it pulls!!

@wilok2497

2 жыл бұрын

Thanks

You have no idea how dope this mean Honda would be to take to the canyons here in souther California, but my city is super hot with California highway patrol and sheriffs handing out state refs like crazy and impounding cars so this would be something I’d never be able to obtain

@wilok2497

2 жыл бұрын

Some states or countries are a little more difficult but isn’t imposible

@richardledesma1675

2 жыл бұрын

@@wilok2497 not impossible but not something that could be driven on the street often without getting caught up

@wilok2497

2 жыл бұрын

Yeah, this is why i left mine like sleeper

@jamesc9897

2 жыл бұрын

@@richardledesma1675 that's why you need to get out of commiefornia

Can you get the same results from a ported K24 head? I have a K24A2 CRX. I need my next upgrades. I was thinking E85 and then 3.2 cams.

Beautiful sedan 🚘

@wilok2497

3 жыл бұрын

Thanks

The climb after the crossover. just goes forever keeps climbing and screaming . If sex was a sound

@wilok2497

2 жыл бұрын

Thanks

How come u made it fit without a ktuned adapter for that manifold ?

Beautiful 8th gen I want to make mine like this. Can you list the cosmetic mods? Like the front bumper and stuff

@wilok2497

2 жыл бұрын

Hfp front lip ESR 18x 8.5 Seibon hood and trunk

@deepakbriglall5845

2 жыл бұрын

Thanks

@ZZ-ed6wp

Жыл бұрын

Any new laptimes on a race track ? Or 60-130 ?

that dip at the crossover is huge!! what rpm is vtec set at? looks around 500-1000rpms to low judging from that graph.

@wilok2497

3 жыл бұрын

Vtec is around 58 or 6k with the k24, but when i had the k20z3 was around 45.

@LeeVai666

3 жыл бұрын

@@wilok2497 thats interesting, your tuner should be able to fix that dip at crossover.

@wilok2497

3 жыл бұрын

Is already good to go but remenber, depends of what camshaft are you using. Because for oem is good lower vtec but with cams is different.

@LeeVai666

3 жыл бұрын

@@wilok2497 i got a k20z3 8th gen with skunk 2 stage 1 drop ins with some 550cc injectors. got it on the dyno and its linear af, wish i could share photos in here.

@wilok2497

3 жыл бұрын

Follow me on ig so i can see it Velez_k24

What have you done to the internally to the moter? Pistons, cams, valve springs and retainers etc

I love it you set up Can you post all the parts that you used on your engine to get 270 hp please

@wilok2497

2 жыл бұрын

Prayoonto cams 4 12.5 pistons Scat H rods Ferrea valves Supertech spring and retainers

@kspec6131

2 жыл бұрын

Goodness it's so much easier to make power out of a K-series then the B series. Lol

@eduardo138879

2 жыл бұрын

ya lo lograste los 270?

@wilok2497

2 жыл бұрын

Si, 275

@eduardo138879

2 жыл бұрын

@@wilok2497 yo quiero lo mismo solo que tengo stock block k24A2

Anything else done asside from the bolt ons and 24/20?

i had 150k miles, plm header, 3in full race and the Hybrid racing intake, i made 217whp and 159lb. Everything else stock. Interesting that you made 208whp only

Holy shittt your fa5 pulls bro, I got a k20 in my and only needs a tune

@wilok2497

3 жыл бұрын

Thanks

So you put an 9th gen si engine is your 8th gen ? I’m curious

@wilok2497

2 жыл бұрын

No, k24 block and everything else 8th gen

@celloasis

2 жыл бұрын

@@wilok2497 thank you for answering 🙏🏽

@celloasis

Жыл бұрын

@@wilok2497 k24 from tsx ?

@wilok2497

Жыл бұрын

Yes

What if I just run a k24a2? Would a get that power with all bolt ons?

@wilok2497

Жыл бұрын

I don’t think so brother

Hey man how did you relocate your battery?? I need help finding an intake set up ive bought three and cant get any to fit please help

Where is the shop that did the work located? Ive got an '09 Si sedan that I would love to have upgraded like this.

cool video bro what headers did u use for the k20/k24 build?

@Xoul35

11 ай бұрын

I want to know too

@tremblayjonathan691

4 ай бұрын

Its not mine but plm does a header that fit k24's very well in the 8th gen engine bay it dont hit

Os this z3 head? What k24 block. I have fat and want at least 260 na

Amazing build, any list parts

I want the 9k revs

Damn bro 😱😱😱 fast guy

@wilok2497

2 жыл бұрын

Thanks

stock bottom end? asking since im gonna be doing the k24/20

@wilok2497

2 жыл бұрын

88mm bore

Como instalasteis la earaña con los rodillos de fabrica

@wilok2497

Жыл бұрын

Se le tuvo q desgastar a la pompa d agua

@dimarisroman5866

Жыл бұрын

@@wilok2497 gracias de todos modos compre el kit k tuned para eliminar los pulí gracias mill

sick build dude

@wilok2497

3 жыл бұрын

Thanks brother

Nice bro, I’m building mine but I’ll like to know what’s your all motor set up? To may take more ideas. Thank you🙏🏻

@wilok2497

2 жыл бұрын

K24 bottom with 12.5.1 pistons and z3head with prayoonto cams

@sahilkm8072

2 жыл бұрын

@@wilok2497 k20z3 or k24z3 head

I will be making close to this horsepower number with a stock block tsx cammed.K20/24. You should be making 300WHP with this setup🤔

@wilok2497

Жыл бұрын

Cams are holding me down a little bit

270+ all motor is fire!!! 🔥 but question, I got a 9th gen si FBO unfortunately it’s a k24z7, and only pushing 215 after dyno. Do you recommend swapping into a k24a2?

Ready for my R53 K20 swapped all motor Mini

@wilok2497

2 жыл бұрын

Should be a good project

@aarongrisham5555

2 жыл бұрын

@@wilok2497 yours is sick AF man

@wilok2497

2 жыл бұрын

Thanks

Hey does this intake mani also fit the stockz3 on the si and is it bolt on ? Ultra race ? Thanks

Hey buddy, where did you tan your map sensor?

@wilok2497

Жыл бұрын

Is on front of the radiator

What k24 block did you use if you don’t mind me asking as well bolt on list?

@wilok2497

2 жыл бұрын

Tsx

Did you have any bolt ons when you dynoed the k20z3?

@wilok2497

Жыл бұрын

Catback, header and intake

Sounds angry I have a 09 sedan SI an want to go all motor k20 head an k24 block as well nice build

@wilok2497

2 жыл бұрын

Thanks

Hello, how many liters of oil did you use?

Was the k24 / k20 weak without the tune? I’m on a stock tune in my 04 tsx with k20z3 head 06 tsx cams 45 vtc gear rbc intake. Hits vtec hard but feels kinda slow

@wilok2497

3 жыл бұрын

You’ll fill more power 100% but obviously you need the tune. So everything run smooth and reliable.

@Onelovej

3 жыл бұрын

@@wilok2497 it feels smooth and it’s very reliable it’s just not very fast just his VTEC hard Without really pulling hard

@wilok2497

3 жыл бұрын

Ok, i got you now

@kuya_mike7813

3 жыл бұрын

@@Onelovej get a tune. will make a difference and will feel way better than what youre feeling now. basemaps are not meant to be driven around on leisurely, its meant for you to get to your tuner.

@armandomorales242

3 жыл бұрын

Definitely tune will feel like an entire differnt car

What rods and pistons are you using .

@wilok2497

3 жыл бұрын

Arias pistons with Scat rods

I am looking to do mine, its a stock k20 all in how much we talking? 5k?

@wilok2497

2 жыл бұрын

Depends what do you want or how many hp you want

@MomentoMori769

2 жыл бұрын

@@wilok2497 about 275 should be fine. If you know of any good builders in Cali...

@wilok2497

2 жыл бұрын

Sadly, No brother

1:55 yall came for this

🤤🔥🚀

@wilok2497

Жыл бұрын

Thanks

And those hps went to the engine or the wheels?

Just pistons and cams or?

@wilok2497

2 жыл бұрын

Prayoonto cams 4 12.5 pistons Scat H rods Ferrea valves Supertech spring and retainers

Nioceeee

208whp seems kinda low for that Z3 with the mods you had. What miles did it have? My Z3 got dynoed at 229whp with a alpha manifold, J35 tb, and RDX injectors that being about the only difference.

@wilok2497

2 жыл бұрын

At that time it got around 181k. The z3 with bolt ons are around 218-230 hp. Obviously you a tb so yours sounds pretty healthy

@treydrake2299

2 жыл бұрын

@@wilok2497 mine is considerably lower mileage than yours yeah I bought mine under 100k and now it's at 134k miles. I'm gonna run it till something craters and do a K24 K20 frank

@wilok2497

2 жыл бұрын

Awesome💪🏾

Was it a built motor or stock motor with juss bolt ons ?

@wilok2497

2 жыл бұрын

Built but nothing crazy

so is this a k24 block or a k24 head?

@wilok2497

2 жыл бұрын

K24 block and k20z3 head

Sick wish Ida used 12.5 comp but I left room to boost and don't want to now. Lol I used 11.5

@wilok2497

Жыл бұрын

How many pounds you want?

@noblewon3507

Жыл бұрын

@@wilok2497 not sure yet. The block and transmission should be able to hold a decent amount..stage 4 clutch give the wave track some work lol

@wilok2497

Жыл бұрын

Should hold at least 12-15

@noblewon3507

Жыл бұрын

@@wilok2497 or 20 lol 😂

@noblewon3507

Жыл бұрын

@@wilok2497 my bad I run 11.1 comp

What mods did the k24/k20 have?

@wilok2497

Жыл бұрын

12.5 pistons Stage 4 Prayoonto Spring and retainers supertech Scat rods and the rest you just see it

❤❤❤

Hey what are you using for tuning? Do you have the flash pro, k pro, or a stand alone ECU? I wanna do this similar set up on mine I just don't know what I can use for a k24/20 set up

@wilok2497

2 жыл бұрын

Flash pro

@fernandorodrigo5829

2 жыл бұрын

@@wilok2497 thank you! Great video by the way!

@wilok2497

2 жыл бұрын

I need to get better on that, right now i do it with my phone but well see on the future

@fernandorodrigo5829

2 жыл бұрын

@@wilok2497oh I couldn't tell picture looks good to me but then again I'm watching the videos thru my phone. Either way I got no complaints about picture quality

@wilok2497

2 жыл бұрын

Thanks but i’ll have to learn better jajaja

car looks and sounds great is this the same motor thats in the 2012 accord coupe 4cyl?

@wilok2497

3 жыл бұрын

Block of Tsx 08

@wilok2497

3 жыл бұрын

Thanks

I plan on doing something like that with my 2015 si k24z 7 with a turbo

@wilok2497

Жыл бұрын

I love turbo

Where did you get the motor from? Or did you do it your self?

@wilok2497

2 жыл бұрын

Acura Tsx

Stock internals? Just k24/k20?

What grade of gas are you using?

waooooo nice.....

@wilok2497

3 жыл бұрын

Thanks

Yo what would this setup make on e85 14:1 compression? Is it possible to make like 350+ reliable? Are you on pump gas in this video?

@campoochozerocuatro

Жыл бұрын

No hahaha you’ll probably make around 300 to 310 on e85 and put the 4.5 DC or 3.5 elite cams to help that compression out. But that’s still a fun power. Now if you throw M5 you will make that power but that’s racing gas. I made 355 on nitro 50 mix with ported head and stock bottom end and cams.

@kballs94

3 ай бұрын

at 275 hp n/a parts are already going to wear out like crazy

Siick

@wilok2497

2 жыл бұрын

Thanks

💪👍🤝💯🔥

What the build list?

Total cost of the build? I’d love to hear! Stock internals? Ported oil pump?

@wilok2497

2 жыл бұрын

I’ll say around 5-7k because i have some parts since a long time ago

What’s the timeslip for quartermile?

Oye Wilo is that the ultra street or ultra race manifold?

@wilok2497

2 жыл бұрын

Ultra race

@jmaldo7334

2 жыл бұрын

Thanks bro

@MINAR3L_GR3Y_2V

Жыл бұрын

Will the ultra street fit on the 8th gen civic si?

@jmaldo7334

Жыл бұрын

@@MINAR3L_GR3Y_2V yes sir

@wilok2497

Жыл бұрын

Yes

What kind of throttle body are you using I just ordered ultra race mani for my 9th gen

@wilok2497

2 жыл бұрын

Skunk2 Grams 72”

@punnskii_9350

2 жыл бұрын

@@wilok2497 with a ktuned mustang adapter to run grams tb on the manifold?

@wilok2497

2 жыл бұрын

It’s skunk2 the adapter

@bottom_lizard192

2 жыл бұрын

If you’re 9th gen bro just do a head swap with rbc manifold. You’ll get more power from that than a over priced intake manifold

So you are saying that all you need is a k24 engine, exhaust, headers, intake, and a tune to make over 270hp?? You sure nothing else ?

@wilok2497

2 жыл бұрын

I got pistons 12.5 and prayoonto cams too

@wilok2497

2 жыл бұрын

If i was you i’ll use 3.2 DC cams beside prayoonto

@harryalexander5429

2 жыл бұрын

@@wilok2497 ahh okay thanks broski🙏🏾🔥

Thats lot grey smoke coming out the motor

Specs

Does the k20z3 head bolt right up to a k24z7 engine?

@wilok2497

3 жыл бұрын

Im not sure

@joeaguilar2316

3 жыл бұрын

@@wilok2497 what k24 block did you use?

@wilok2497

3 жыл бұрын

From a tsx

@shawnmarques7117

2 жыл бұрын

Yep

Using hondata flashpro?

@wilok2497

2 жыл бұрын

Yes

Did you use the Ultra Race or Ultra Street Manifold?

@wilok2497

2 жыл бұрын

Ultra rece

Wats the set up if u don’t mind me asking ?

@wilok2497

2 жыл бұрын

K24/20, prayoonto cams

Is it stock piston and rod

Is the transmission and everything compatible with the k24 or did you have to do conversions?

@wilok2497

3 жыл бұрын

I got transmission and head from oem k20z3 and the block is k24

@dongotti6647

3 жыл бұрын

@@wilok2497 that means the k24 motor is compatible with the k20 transmission...respect for your reply.

@wilok2497

3 жыл бұрын

You have to change the base that is between the block and the passenger mount. But basically everything is compatible.

@RJ_Slidez619

3 жыл бұрын

@@wilok2497 did you have to replace pistons for it to rev that hugh

@wilok2497

3 жыл бұрын

You don’t have to but i did. Just to make it reliable.

why the smoke tho?

what mounts did you use?

@wilok2497

2 жыл бұрын

Hasport 70

Damn revving stock motor to 9,000 Couldn't have lasted long.

@wilok2497

Жыл бұрын

I’ve good oil pump, springs and retainers

Nice de que parte de GA son?

@wilok2497

2 жыл бұрын

Ya me mude de alla, era de cerca de savannah

Did you port the block and head?

@wilok2497

3 жыл бұрын

Just Intake on the head

Can u pls tell me what brand tb and do u need a spacer to bolt into the intake?

@rickyperez46rp

3 жыл бұрын

Most likely ktunned or grams And yes adapter will be needed should come with tb

@lllllllllllllllllllll1lll1

3 жыл бұрын

Avoid the Ktuned and Grams junk, go with a Honda J35 throttle body if you're staying NA. They're far more reliable. Throttle body gains are usually pretty minimal though so I'd throw it on last.

@jeryandrade6

3 жыл бұрын

How u made it fit the manifold without using a ktuned adapter and what tb u using with that Im

@rickyperez46rp

3 жыл бұрын

@@jeryandrade6 the adapter is sold with the throttle bodies. Whatever one you're buying has an adapter. Just email the company your gonna get a throttle body from and they'll help you

What k24 did you use

Is this a k24a2?

header

@wilok2497

2 жыл бұрын

Skunk2 alpha

@Hoodscoop__

2 жыл бұрын

@@wilok2497 did it fit wit no firewall issues ???

@wilok2497

2 жыл бұрын

I use 4 screw spacers between the rear mount and the oil pan

oem cams.??

@wilok2497

2 жыл бұрын

Prayoonto stage 4

@jimmyscivicEP3

2 жыл бұрын

@@wilok2497 Thank you !!

How can i make my 86 dodge Aries wagon faster?

@quinnvineep3

2 жыл бұрын

Kswap

Oh nevermind i can just watch this video

@wilok2497

2 жыл бұрын

No problem

Which type of cammes do you use?thank you

@wilok2497

2 жыл бұрын

Prayoonto

@marcobertone6404

2 жыл бұрын

@@wilok2497 stage?

@wilok2497

2 жыл бұрын

4

@marcobertone6404

2 жыл бұрын

@@wilok2497 thank you

Compression ratio?

@wilok2497

3 жыл бұрын

12.5.1

@Jan-ny8hn

3 жыл бұрын

@@wilok2497Damn thats pretty high, can you still run pump?

@wilok2497

3 жыл бұрын

Yeah pump 93 without issue

Wheels? I mean offset etc etc😅

@alesaba2012

2 жыл бұрын

Bueno creo que eres latino como yo así que, me refiera al offset tamaño etc de esas enkei, estoy en duda en la compra por qué no se bien que elegir. Me gustan idénticas a las tuyas, si recuerdas las características por favor me las podrías pasar gracias

@wilok2497

2 жыл бұрын

No son enkei, son ESR 18x8.5 el offset si no me equivoco es +40

What's been done to the motor?

@wilok2497

3 жыл бұрын

K24 with Pistons and rods Prayoonto cams Intake and header, full exhaust

@fidelj3025

3 жыл бұрын

@@wilok2497 nice! I have the same setup on my em1 si but I have DC 2.3 cams tuned on 91 that made 277 and on e85 at 295

@wilok2497

3 жыл бұрын

This one is tuned with 93 and made 275. im pretty sure with e85 i can make more but where i live the gas station with e85 i so far and i daily use the car. Dc i believe are the best ones right now. But i got the prayoonto since 2014

@wilok2497

3 жыл бұрын

Another thing im using hondata and i can’t use a throttel body more bigger than 72mm

@fidelj3025

3 жыл бұрын

@@wilok2497 ah I see, yeah the DC has a high lift on the 3.2 that's equivalent to the Prayoonto stage 4.

What trans

@wilok2497

3 жыл бұрын

2006-2011 Civic Si oem

What bottom end is that

@wilok2497

3 жыл бұрын

Tsx k24

@t.kickstartbun1e797

3 жыл бұрын

@@wilok2497 did u do a bottom end refresh or just put ur head on it

@wilok2497

3 жыл бұрын

Full bottom Refresh

@DJFresh1997

2 жыл бұрын

@@wilok2497 so oem parts not built

@wilok2497

2 жыл бұрын

K24/20