It was an honor tackling this project with you! We definitely packed a lot of features into a small package in this unique platform. Note to any builders, this gun is very picky and the smallest of details are crucial for a reliable and functional outcome. Looking forward to many more!

@bluemulletknex

5 ай бұрын

I was curious if you were going to drop a comment. Yes it was an honor to work with you once again as well! I hope that many of the old builders will eventually see this piece. I think some of them like TheDunkis would really appreciate this one. We’ll for sure be doing more collabs if time permits.

@hiddebardega1138

4 ай бұрын

Your videos made my childhood man thx

@bluemulletknex

4 ай бұрын

@@hiddebardega1138 It is still jaw dropping to me that I earned such an high honor in a few people’s childhoods. I’m glad I/we were able to be apart of such an important time in your life man.

@hiddebardega1138

4 ай бұрын

@@bluemulletknex all love man

Dude, I used to build knex guns with your videos when I was a kid. It is so good to see you back online!

@bluemulletknex

4 ай бұрын

It’s great to see you again man! I’m glad to be back online and for you finding my channel. Plan on building anything or have you stopped?

@kylianvanoostrom5898

4 ай бұрын

@@bluemulletknexI haven't touched my knex in years but I still have it in my house somewhere. I am going to make this pistol because I like the features:)

@bluemulletknex

4 ай бұрын

@@kylianvanoostrom5898 Sounds good to me! Im curious to get your thoughts on the gun once you finish the tutorial.

Love your work. Both of you a very good job. I made almost every gun over the years. Love to see new designs and make them myself. Childhood legends 🤘

@bluemulletknex

5 ай бұрын

Thank you for your kind words! I’m glad we were able to be a part of your childhood!

Legendary collab

@bluemulletknex

5 ай бұрын

I’m just very thankful that we managed to pull it off and that we kept in touch after all these years.

I couldn’t make this gun because it uses some pieces I don’t have but amazing build keep up the good work

@bluemulletknex

5 ай бұрын

No problem man. You can always head on over to eBay and get some new parts!

@Skelly895

2 ай бұрын

Is there a part lost so I know what to buy?

This is an amazing piece of engineering. Looking forward to putting it together

@bluemulletknex

5 ай бұрын

I appreciate your kind words. Im curious to hear your thoughts after you finish building it.

Super Cool looking gun. You both like you & Lucastheboss. It’s amazing past few years building cool guns. Am looking forward for the future 😇👍🏻

@bluemulletknex

5 ай бұрын

Thanks for commenting! Im looking forward as well.

Holy mackerel people are still making knex vids

@bluemulletknex

23 күн бұрын

It is a hobby of the past isn’t it? At least the gun building community is- definitely way past its prime.

Looks good

@bluemulletknex

2 ай бұрын

Thank you!

I’d like to thank LucasTheBoss for doing this collaboration with me! I definitely wouldn’t have pulled it off by myself. A reminder there is a parts list in the video’s description box for you to take advantage of. Please note that this gun is very picky and will most likely have problems if you do not build it exactly to the video instructions.

@remain_unconquered

5 ай бұрын

Man, you should get the boss to post again.

@bluemulletknex

5 ай бұрын

@@remain_unconquered Somewhere early in this collab I did ask if he was going to make a video of this pistol on his end. It seems that he’s content with just building which I totally respect. I’m just happy that he is still interested in building as a whole.

@remain_unconquered

5 ай бұрын

@@bluemulletknex that’s totally reasonable. I got a suggestion for you since YOU are back and resuming your knex marksmanship, a colt python!

@remain_unconquered

5 ай бұрын

@@bluemulletknex in addition to what I said, I loved your old videos except for the fact that I could never finish the guns merely because the guns you built were very piece and broken piece consuming for me and there were no parts lists, so that was a big limitation. I love the new videos though, because you incorporate parts lists and use no broken parts! It’s also really sweet that you use the grey/black parts to create an authentic design for the guns!

@bluemulletknex

5 ай бұрын

@@remain_unconquered I’m glad that you like these new guns/videos as they take a lot of time to make. I’ll keep the revolver in mind!

Is there a place to buy the special pieces that you use in your build? There are some pieces I don’t have like the half purple connectors

@bluemulletknex

20 күн бұрын

Hey! So when I need parts I’ll go get them off eBay. I look to sellers such as NCToyShop, MNWebstore, and KnexMore. They have plenty of parts and tend to have good prices.

@user-pp3we3sk1g

18 күн бұрын

@@bluemulletknex ok thank you 😁

Whats your old channel? as all of these guns have certain pieces that i dont have enough of. (I cant order those pieces from e bay cause im pretty young

@bluemulletknex

Ай бұрын

My old channel was called BMK’NEX. Sorry to hear that you can’t build any of my guns. I do plan on releasing a video that will have instructions for a few small pistols from that old channel of mine. Hopefully you’ll be able to build one of those!

I'm a lefty but I shoot with my right hand

Hey I don't get the build for 5:08 it seems strange..

@bluemulletknex

4 ай бұрын

Hey! That tan clip just has a small micro gray spacer slid onto it. It will be very tight to get it on however it will go with enough force.

Hey Blue Mullet! I was wondering if you want to collab and make a gun together. Will you be okay with that?

@bluemulletknex

5 ай бұрын

As of right now I just started my second semester so Id prefer not to collab. LucasTheBoss and I barely got this done in time. Sorry man but I’d still like to see more builds from you though!

one gun i really wanna see again is the handheld slingshot

@bluemulletknex

5 ай бұрын

I’m sure I can bring that one back without much trouble. You’re talking about the one that shot a red rod with a tan clip on it right?

@kaydenthegamer

5 ай бұрын

@@bluemulletknexyes

Where do u ring piece like female hinge pieces

@bluemulletknex

5 ай бұрын

I get all my parts from various eBay sellers. I’ll get whatever I think is a good deal and I prioritize mixed lots for standard parts.

Wait a minute.... What are the pieces at 7:53?!? They look simple enough to create, courtesy of my broken piece bin. just a little heat on one end of small bit of rod and press to make a lip.. I thought you meant the silver open ended X-rods

@bluemulletknex

5 ай бұрын

I’m actually not sure of their actual name. I just call them x rod end pegs. They’re not really needed so you can just skip them. I used them to prevent the orange connectors from turning slightly and catching the slide.

@tornadojoe87

5 ай бұрын

X-Rod Rivet Cap 👍 I was able to find some after many random search terms and I ordered 20 of them I believe

@bluemulletknex

5 ай бұрын

@@tornadojoe87 Nice find. I don’t find them to be incredibly useful like the longer x-rod however they did come in handy for this pistol.

Could o make it with no tape??

@bluemulletknex

Ай бұрын

It can be however those little green rods will have a tendency to fall out which will be annoying. Id say just go get some tape the next time you’re out.

This gun shoots very nicely but doesent operate very nicely when reloading. I will improve and modify it and then feature it

@bluemulletknex

5 ай бұрын

You build pretty quick! Are you referring to the reloading process itself or pulling the slide back? Also did you build it exactly to the instructions? There are a ton of small details that don’t seem like a big deal but they are. If you change these parts out then it will not work like mine does. I’m just curious to know what could be going on with yours because you can clearly see mine operates great! Regardless Im looking forward to seeing what you come up with. Before you change anything just know that this gun is very very picky and will fight you with every mod you do haha.

@QuestionableActivites

5 ай бұрын

@@bluemulletknex I do definitely think that I build pretty quick. in fact I can build guns from just a few good pictures. I was talking about the process where you have to make sure they are put in straight. it’s really difficult to get them in there without using a rod or some kind of tool. Enough bad tho, the slide motion is very very smooth and it shoots accurately with a high velocity. And in fact this is the farthest shooting gun I’ve ever made. I was appalled by how they straight they flew and didn’t tumble out of the gun. I am still very impressed how it only uses one band.

@bluemulletknex

5 ай бұрын

@@QuestionableActivites I gotcha. If you follow the little tutorial in my video right after the instructional slideshow you’ll see how I load it. You’ll eventually get pretty good and fast at it. It’s really not a horrible process! This gun does shoot very well. It’s why there was so much emphasis on the repeating slingshot back in the day. I’m very glad that LucasTheBoss and I were able to pull this one off.

@QuestionableActivites

5 ай бұрын

@@bluemulletknex yea I did see the little section at the end

How fast am I know?

@bluemulletknex

5 ай бұрын

You must have notifications on or some magical automatic system replying for you because it’s instant haha. What are you thinking about the gun?!

@SestemTheKnexer

5 ай бұрын

No I am just magicly on youtube because I don't have notifications on for your channel. I really like the slide action part of the gun. Although, it would be nice if the handle looked a little better but that requires broken pieces, you have done such a good job on this gun.

@bluemulletknex

5 ай бұрын

@@SestemTheKnexer Maybe you could be the man to build a new handle for it. I always get excited to see what other people build.

@SestemTheKnexer

5 ай бұрын

Idk man, I'm not the best at that stuff.

PLEASE SELL ONE PLS

@bluemulletknex

Ай бұрын

Hey! I don’t offer any of my K’Nex builds for purchase. If you want one you should consider getting pieces and building one for yourself. Pieces can easily be bought from various sellers on eBay.

@Breadisroblox3

29 күн бұрын

Alright sorry for the misunderstandment.thank u

@Breadisroblox3

29 күн бұрын

Can u please make a machine gun tho.

@bluemulletknex

28 күн бұрын

@@Breadisroblox3 You’re good! I don’t believe I have mentioned it anywhere so it was a great question to ask. I hope you do end up getting the pieces to build this pistol as it’s a really cool one to mess with. I have many projects I’m working on and a rather long list of unbuilt guns. I’ll still keep a machine gun in mind. Thanks for your suggestion.

@Breadisroblox3

28 күн бұрын

@@bluemulletknex this was a really fun topic to talk about.with my 300$ i will!