this day just got better :)

@2STROKESTUFFING

5 жыл бұрын

👍 😁

@antonaahus752

5 жыл бұрын

Sure did! :D

need money.. where is MR BEAST when you need him :)

Been wondering how things are coming along super happy you decided/found the time to update all of us! I am seriously excited to see the upcoming progress/success videos. ...thank you once again and stay safe friend.

hopefully some Nikasil platers give up some 'tricks and tips' for your set-up

Cool can't wait to see the coating 🚲💨💨💨

@2STROKESTUFFING

5 жыл бұрын

Thanks!

@broo_shs

5 жыл бұрын

jeah same here but let's hope all go well in first time

Awesome, can't wait to see the results!

Your videos are always a pleasure to watch. Thank you.

@2STROKESTUFFING

5 жыл бұрын

Thanks!

Waiting for this 2 stroke!! Good luck from Brasil!

Awesome! I cant wait to see how it goes. I can think of lots of uses.

ROCK ON Alex. wishing you the best luck. and look forward to your next video.

@2STROKESTUFFING

5 жыл бұрын

Thanks man!

Say, I'm not sure how harsh the chemicals are, but the easy way to make sure there is no problem with the recirculating pump is to use Tygon tubing and the kind of pump that squeezes the tubing for pumping action.

@GogogoFolowMe

5 жыл бұрын

Peristaltic pump that is, thumbs up for ya

we are wondering. your channel should be 4 times or more subscribers. this by far is the most interesting channel i have found. thank you.

@antonaahus752

5 жыл бұрын

Definitely the most interesting 2 stroke channel on YT atm. There are several good ones but this one is the best.

@2STROKESTUFFING

5 жыл бұрын

Thanks guys!

Like your videos and your style doing those. So interesting content to everyone who are like me, allways wanting to learn more technical stuff about everything especially engine/car/bike related things. Currently exploding my brains in the fuel>ignition>boom things. 😁 Keep up the good work! 👍🏼

WOW Please make / include in a vid the machining -some of. Ditto keen to see the coating process & result !!! :) :) :)

Good luck!!! And greetings from the Netherlands

@2STROKESTUFFING

5 жыл бұрын

Thanks!

Right on. I'm a broke dock too. Wish I could help. Love two smoker power !!!!!

Keep up the good work! Greetz from Belgium

@2STROKESTUFFING

5 жыл бұрын

Thanks!

love you're updates!

@2STROKESTUFFING

5 жыл бұрын

Thanks!

The ultimate doityourselfer. You are awesome, I hope someone with $ is watching.

@2STROKESTUFFING

5 жыл бұрын

Thanks!

*Just Catching up on your Videos!* Looking good and nice to see you are getting some of the Equipment you need!

Best of Luck Alex, you can do it and i really hope that there is enough money that will come together to make your Project happen.

@2STROKESTUFFING

5 жыл бұрын

Thanks! We'll get there!

Great Stuff ! love 2Ts from London

wait to see the cylinder & coating soon :)

I threw a few us dollhairs in the pot, hope it helps. Good luck to you sir. Can't wait to see it all come together.

@2STROKESTUFFING

5 жыл бұрын

Thanks man!

THIS IS BIG! I'm hoping for some good documentation .

@2STROKESTUFFING

5 жыл бұрын

Thanks! I'll try my best to be thorough!

I really would like to see where this goes ! Great work !

@2STROKESTUFFING

5 жыл бұрын

Thanks!

dying to see both methods,, I so want to plate my cylinders myself... AND see details on your cast cylinder!!

Awesome job sir, keep it up

@2STROKESTUFFING

5 жыл бұрын

Thanks!

Hey, I just bought that same yellow Ikea chair, haha. Great news, looking forward to the results!

@2STROKESTUFFING

5 жыл бұрын

😁👍 It's a nice chair!

Electroless plating has some perks but also requires more attention and regular adjustments to the bath composition. Basically you need to have a pretty good idea of the surface area being plated and track that versus time to know when to add more stuff to your bath to maintain the proper composition. Plus that heating thing when it's some fairly nasty stuff.

@2STROKESTUFFING

5 жыл бұрын

Yep, exactly. Thanks!

Following you..it's great what you are doing....greetings from philippines.

@2STROKESTUFFING

5 жыл бұрын

Thanks!

This is looking good!

@2STROKESTUFFING

5 жыл бұрын

Thanks!

Very interesting. I love your channel.

@2STROKESTUFFING

5 жыл бұрын

Thanks!

Cant wait to see this thing

You have a mindset that is only matched by your thirst for knowledge and that will not allow your brain to explode so you are safe. I am anxsious to see the machined parts and look forward to this next step. Are you going to machine out one of the other cylinders to test on before you attempt it on the good ones. I am looking for results like I had riding a newer race bike the other day GOOSE BUMPS being sixty I only took a short ride on a 85 cc ktm race bike the other day that little fuker felt like it had more power than the old 175 yamaha I used to ride lol. This is what I am expecting from your project more goose bumps. Thank you for sharing and one way or another I will get some financial aid on its way to you as I need my adreneline rush any way I can get it and your channel has been a great source of enjoyment for a while now. Good luck and god bless, play hard but play safe you got this man, always amazing, peace from Ontario Canada and this brap life bro. Cant wait for the test drive!

@2STROKESTUFFING

5 жыл бұрын

Thanks man! 😁👍

Great stuff. Cant wait for more. You should totally put in the description witch rum you are drinking. Also if you can get Cuban rum you should totally try Santiago de Cuba rum

@2STROKESTUFFING

5 жыл бұрын

Thanks, and thanks for the tip!

There is a small company in Stranda that makes the plating for stressless chairs. They have a huge tank array for this. I do not know if it is the right chem stuff for you but maby it is worth giving them a call if they are still there.

@2STROKESTUFFING

5 жыл бұрын

Thanks for the tip!

Cool stuff, I will be around !!!

I wish I had extra money to give you because I think this is huge. I’ll be sure to send some your way soon, I don’t want this project to fall short

Hell yeah man!

anode/cathode plating allows you to build-up nearly any thickness

@2STROKESTUFFING

5 жыл бұрын

Yep, that's a big advantage.

Hi again I have also seen the piston electroless plated just past the rings leaving the skirts to have something like techline del I could be wrong on the name just look up techline coatings on you tube I love the show

I think there’s plenty more room in your head before it will explode. Keep it coming and I hope it all goes as planed for you.👌👌👌👍🍺

Where do you find the compounds for the nickel silicon coating? Tifoo?

Donated 20 dkk to you through paypal. I'm very poor, but this is so exciting to follow! Go on everybody, donate even a very little and make this project come true! :)

@2STROKESTUFFING

5 жыл бұрын

Thanks man!

@niklashumberg8939

5 жыл бұрын

@@2STROKESTUFFING I also am a quite poor student, but i donated 15 Euro because i really enjoy the content and learn a lot. Someday i will cast my own cylinder for my little Kreidler :)

@2STROKESTUFFING

5 жыл бұрын

Thanks, means a lot!

someone in the automotive industry should hire you, it's crazy what one man can do in his garage

@CristiNeagu

Жыл бұрын

Especially when making anything at all is so difficult. Like even the first cast he did, as bad as it was. Most people don't realize how much effort is needed to get even a failed result.

Hi love your work

@2STROKESTUFFING

5 жыл бұрын

Thanks man!

Great vid🤙

@2STROKESTUFFING

5 жыл бұрын

Thanks!

Nice.

Sau geil weiter so

Hi Are you going to cast some tubes for testing the plating before going to the real cylinders ?

@2STROKESTUFFING

5 жыл бұрын

Probably, or use the failed castings.

You have my attention... tell me more

Girlfriend arrives... retreat to man cave! Very smart 😂

@2STROKESTUFFING

5 жыл бұрын

👍 😁

@snagle87

5 жыл бұрын

Does she own the house or...?

I would love to see everyone who comments on how great this mans idea is, to go ahead and please chip in, and throw this man a dollar please, I just made a $5 AUD donation via paypal at 5:00pm Australian time. Don't believe me ask the channel owner to verify it for you, common people help this man out a little, we all wish we had the skill to go ahead and create something, that might change 2 strokes for ever.

@2STROKESTUFFING

5 жыл бұрын

Thanks man! Donation received!

Interesting. However i personally i'm more interested in the your cylinder design work. Even if you eventually get a nicalsil process up and running you need to get diamond honing equipment. And you better try out the process on cheep barrels and not on you special one. And its not that expensive to get it done professionally e.g. in germany (ebay). I did hardcroming of aluminium cylinders once upon a time when chemicals were fairly easy to buy. It was very messy.

When will the cylinder be back from machining

@2STROKESTUFFING

5 жыл бұрын

As soon as Hollaendaren is done + shipping

Você usa gesso comum com areia

Electroless is better in my opinion you can control thickness and you won't get sharp containers checkout caswell I don't think it would take the time you think I think I'd go with nickle and hexaboron powder

@2STROKESTUFFING

5 жыл бұрын

I'll see how this works first, but electroless definitely has its advantages.

Is the "test kit" for a trial run, or is it a means to test for plating compatibility?

@2STROKESTUFFING

5 жыл бұрын

Plating compatibility.

Forget elctro plating it flakes off, send it to somebody that does nikasil 👍🏼

@2STROKESTUFFING

5 жыл бұрын

That's exactly what I'm going to do, Nikasil plate it at home.

Waiting for stuff to arrive when in the middle of a project is one of the most frustrating things, it really interrupts the flow so hope you are not waiting for too long. When you are making/editing your videos, when doing things could you add annotations such as "adding flux" or "degassing with ____" so that people who might not know exactly what for example that stuff you put on top of the molten alloy over the flu and things like that, I think it would be really helpful for everyone especially when they want to come bask to one of your videos to see what you did. Like just flashing up the recipe of the plaster/sand mix, type of sand etc, I think that would add a lot to your videos. At the end of the day information is king and knowing what is going on is going to be really helpful to a lot of ppl.

@2STROKESTUFFING

5 жыл бұрын

Word. Sure, good idea!

Please active subtitles in your future videos. Thank you !

lykke til med dette! du er på god vei

This is good wideo.

kan du lage video på pakninger?

Show de bola

I used to race a 2 stroke Husqvarna CR 500 on 145 aviation gas. How much power is your bike putting out?

@2STROKESTUFFING

5 жыл бұрын

I'm shooting for 30 crank hp from 50cc

@vinylexperience77

5 жыл бұрын

@@2STROKESTUFFING wow that is very impressive.

Just send the cylinder to airsal it costs like 100€ for the nicasil

@2STROKESTUFFING

5 жыл бұрын

Yeah, but I want to do it myself...

I want to buy a dyno shield, how can I get one?

@2STROKESTUFFING

5 жыл бұрын

Awesome! ardyno.weebly.com

Breaking Bad! 🤘🏼😉

This is fuckin owesome!!!

Keep on keepin’ on! I’m following along in great excitement all the way from Fredrikstad :-) Shoot me a message if you need help with anything!

@2STROKESTUFFING

5 жыл бұрын

Takker😁👍

I would donate but can't work out the paypal page !

@ktmtragic1397

5 жыл бұрын

In the link

@2STROKESTUFFING

5 жыл бұрын

Thanks man! You can transfer directly to 2strokestuffing@gmail.com if you want.

I just sent you an email for the ardyno shield. I'd like to buy one.

@2STROKESTUFFING

5 жыл бұрын

👍

I love electrolysis, its like magic

@DepakoteMeister

5 жыл бұрын

Not at all, electrolysis is real! ;)

Here's an idea that will make you rich! Figure out how to build a 2 stroke that oils like a 4 stroke. There has got to be a way. If the epa didn't make 2 stroke a dirty word in the USA it would of already been accomplished I'm sure and economical.

@remingtonmitchell8117

5 жыл бұрын

Look up 2 stroke Detroit diesel.

@jesusisalive3227

5 жыл бұрын

@@remingtonmitchell8117 The problem with the Detroit is the added valve train. It adds extra parts and weight. I have thought about taking a small dual overhead cam engine and converting it to a two stroke. It would take some cam work but I do believe its possible. I still think it's possible to build a 2 stroke with a sump without using a valve train. Maybe something like a side oiler configuration with high pressure squirters set to squirt the oil while the ports are closed. Something along those lines. If you could build a light clear gas burning 2 stroke you would be a very rich individual!

+

Sent you a little money, hope it helps.

@2STROKESTUFFING

5 жыл бұрын

Sure does, thanks!

Is it possible to build a 50cc Wankel engine?

@2STROKESTUFFING

5 жыл бұрын

Absolutely!

@paninisinabox

5 жыл бұрын

idk. it would be so tiny. so a 1.3 liter duel rotor is something like 1300 ccs i think. they already are a tiny engine. 50 ccs would be so tiny i think you would be better off with a brushless motor no?

@jimsmith1856

5 жыл бұрын

@@2STROKESTUFFING I looked all over ( the internet) but I can't find one that small.

Nickel plating is not Nikasil.

@2STROKESTUFFING

5 жыл бұрын

Nikasil is composite Nickel/Silicon Carbide plating.

make the subtitles

dude awesome shit.just dont expect durability from it. bmw had trouble with their nikasil coated engines. the nikasil would start "rotting" and would basicly destroy the engine, but that would happen at high milages 200k and up so as you are building small 2 strokes and prob and expecting such milages anyway it might not be a problem

@DepakoteMeister

5 жыл бұрын

Nikasil plating has been used in competition 2-stroke bikes for decades.

Ja vet inte om ja är dum, tänkte donera till dig, men paypal var ju skitjobbiga! Vet inte om jag använt dom tidigare eller vad problemet var, men dom gav sig fan på att jag hade fel lösenord, så ja gav upp. Kunde man inte swicha istället? Hade ju vart så lätt😁 hur som helst så gör du ett förbannat bra jobb!👍

@jonnyhietanen1151

5 жыл бұрын

Nu löste de sig😆 lycka till med coatingen!👍

You should not be shy with asking for money man, you are offering up real stuff for real people who pay real money for the things you are teaching people to do on their own. Don't worry about those fumes damaging your brains too much man, if you'[re not scared of nitro fumes, t hen you'll be fine, but you'd better know this. Those fumes will start a process on everything metal in your shop that will corrode everything in sight and out of sight and once it starts it won't stop so do it outside for sure. All your tools will be rusty and wasted if it gets near them, much worse than brain damage my friend, the creator gave you plenty of brain cells but the outer protective layer of your tools is only a joke when confronted with those fumes, it will even get under your screen on your phone and tv. Peace Sizzlean

@2STROKESTUFFING

5 жыл бұрын

👍 😁 Thanks man!

I really enjoy your videos, they make me smarter :) but please, please wear your cap like a grown man

@2STROKESTUFFING

5 жыл бұрын

Thanks! I'll never be a grown man.

@barirwin8559

5 жыл бұрын

Hopefully one day you get smart enough to drop the need to judge .

Don't blow your brain bro....