Junkyard 351w Stroker Build SOUNDS INSANE "THE FORD 387" Budget Horsepower!
Автокөліктер мен көлік құралдары
We stuck factory 302 pistons into a 351 windsor block w/ an aftermarket budget crank and this is what happened... The Ford 387 Stroker! Cheap, Budget and FAST!
#ford #mustang #foxbody #neomustangs #horsepower #builtnotbought #diy #howto #351w #408stroker #install #engine #enginebuild #mechanics #fabrication #budget #junkyard #351windsor #smallblockford #strokermotor
SUPPORT THE CHANNEL: Click the JOIN Button for MEMBERSHIP!
/ @neomustangs
___________________________________________________________________________________
SMASH LIKE, SUBSCRIBE AND BELL FOR NEW VIDEOS! (REMEMBER TURN ON ALL NOTIFICATIONS ON YOUR PHONE/DESKTOP!)
[CONTACTS]
TEE-SHIRTS!: teespring.com/stores/neomustangs
INSTAGRAM: / neomustangs
TWITTER: / neomustangs
FACEBOOK PAGE: / neomustangs
EMAIL: NEOMUSTANGS@HOTMAIL.COM
___________________________________________________________________________________
[PLAYLISTS:]
TECH CORNER PLAYLIST: kzread.info?list...
PROJECT HOTWHEELS: kzread.info?list...
BLACK CAR: kzread.info?list...
GRUDGE NIGHT RACING: kzread.info?list...
DADS CAR: kzread.info?list...
Пікірлер: 123
I love that you didn't edit out all the little things you have to fix that you always have with a new motor. The leaks etc. It shows that you're real and not trying to make it look like you can just throw something like this together start it and run to the track. Love the channel
@Neomustangs
Күн бұрын
Thx man!
Maaaaaan, that’s the smoothest first startup I’ve ever seen!
@Neomustangs
6 ай бұрын
Tune was spot on! well.. kinda haha thanks for stopping in!
@ElevatedEyez
6 ай бұрын
Facts! No hestiation at all.
@Neomustangs
6 ай бұрын
@@ElevatedEyez definately needs some tuning a bit but the startup wasnt off much. Needs more fuel.
Can't wait till she's tweaked and finely tuned GREAT WORK BROTHER
@Neomustangs
6 ай бұрын
Full send ahead !
Sounds good. Can't wait for the dyno numbers.
Sounds good. I’ve been following you for a few years now. Wasn’t a dedicated follower until the past few months. I’ve always had mustangs for projects. But after selling my 96 gt a few years ago. I wanted another project. Looked high and low for a fox and settled on a ranger. The desire to build the ranger was never there. But after watching some of your junk yard videos and the 387 videos. The desire came back. Thanks NEO. I owe ya one brother
Sounds great! Very interested in seeing what kind of numbers it makes.
@Neomustangs
6 ай бұрын
Hell ya
PROUD AS A NEW FATHER ! = nice baby .
Heck ya bad azz its nice when hard work pays off! looking forward to seeing the dyno run.
@Neomustangs
6 ай бұрын
Hell ya hard work paying off
Hell yeah! Sounds good, ready to see laying some stripes!
Let's gooooo!!!! Im just excited as you are lol. Can't wait to see how it does N/A on the dyno!
Just plain awesome Daddy Dan. Have a good New Year Holiday. All the best in 2024, Brent
Sweet man. Can't wait to see the numbers.
Awesome Man!!! Looking forward to seeing it in action!!!
Fired right up, and it sounds awesome 👌
Sounds awesome
Absolutely awesome Dan!! I love it 😍. Thanks for sharing
Congrats!
Looking sweet
Just seen Miss maverick giving you a shout out! ❤
@Neomustangs
6 ай бұрын
Hell ya! Tess and Tony are great friends of mine! #stickshiftlife
Awesome!! Can't wait to see it in action on the street!!
@Neomustangs
6 ай бұрын
Hell ya
Sounds tough as!
Love your videos👍🏼👏🏼👏🏼
Nothing like a first start! Awesome
@Neomustangs
6 ай бұрын
Yep!
Sounds good
G R E A T V I D E O . . ! ! !
Really enjoy your content. Keep on keepin on!
@Neomustangs
6 ай бұрын
Thanks, will do!
Sounds good. I bet it's going to be awesome numbers 👍🏻
@Neomustangs
6 ай бұрын
Hope so!
Great video, needed to see something like this after the #$%# week i've been having. only thing I can add is, if you pour fluids out of a bottle like a coolant bottle's shape, turn it so the wide flat side faces the ground. it lets the air get in faster so the fluid doesn't pulse out of the neck and spill all over. i feel for ya about getting broken parts--i've been without a working bathroom for the last two weeks b/c the plumbing store keeps sending stuff that must have been returned broken and then put back into inventory rather than into the dumpster. damn good idea marking the reverse-flow serp water pump pulley with an arrow.
Sounds great bro awesome work 👌
@Neomustangs
6 ай бұрын
Thanks ✌️
😵That baddie started and purred as if it was a first factory start! Yup, subscribed. 💪🏼
@Neomustangs
6 ай бұрын
Thanks for the sub!
Congratulations! Sounds mean!
@Neomustangs
6 ай бұрын
Thanks!
Lmao, this is What ive been waiting for neo.. you almost had me neo with the last vid.. ive been waiting for this n/a
Oh get that on the dyno !
Cool stuff Neo. My last 393W low dollar stroker was a blast for almost 2 decades with manual/auto trans and also with a 50 shot of Nitrous to run the local 10.0 Index class sometimes. When I put the G Force g101 in it I just did the NA stuff and down at MIR it when a best of 10.03 at 133. Soooo damn close to a 9 sec pass. Ugh. Then I put together a 427” dart block NA combo. Only ran in the heat n no better et but same top end parts. Got a whole new combo coming together now with upgraded pieces.
@Neomustangs
6 ай бұрын
ya this is basically a 393 but w/o having to bore it. Good build you had there!
Man! What i would do to know this kind of knowledge to finishing my 306 🤦 FML . great build brother 👏 👍
@Neomustangs
6 ай бұрын
Thanks 👍
Nice Dan!!!!
@Neomustangs
6 ай бұрын
TY!
@TheEpmd40
6 ай бұрын
I can’t wait to see how it performs on the dyno. Watching your channel has helped immensely and is giving me inspiration to build another motor for my 88 Vert GT. Your video’s were a big help with my heads and intake switch and rebuilding my GT40P’s. Keep up the good work!!!
Great to see if fired up and running Dan. Looking forward to the dyno soon to see what it makes. Got a 351w sitting around that is tempting to do this with.
@Neomustangs
6 ай бұрын
Thx man
Nice
the litle mouse is alife, very good job, and sounds good too, maybe 500 hp
Very nice man I’ve got the exact same crank in my winsor in my 72 Gran Torino except I punched out my block .060 over yielding at a whopping 400 ci 302 flat tops with stock length 351 rods
@Neomustangs
6 ай бұрын
Hell ya
Been following the build, 1000% gonna build something similar! The only difference is I’m going with solid roller and sniper efi
@Neomustangs
6 ай бұрын
Nah keep it budget. If you can get cheap old school pistons in a stock bore pfft send it.
Where can I find one of those intakes lol sucks they’re discontinued also love the videos! Living vicariously through you as a broke college dude
2:44 , I am lucky enough to have kept all of the little things like those brackets and pieces that came out with my 351W out of my old E350 and the other stuff that I thought 🤔🧐 I could use or someone else might want or need.
Hope it makes good power. Don't think it's going to make what I thought it would but it'll be good power!!!
@Neomustangs
6 ай бұрын
lol what
From what kind of vehicle came from your radiator fans ???? I like the double fan set up !
11.5:1, stock fox pistons, stock 351w rods, stock block with a back yard hone, $300 crank shorty headers. effin A, talk about budget. probably lay down 415+hp, 425ftlbs of torque. that b31 cam is one of my go to cams. i had it in my 408. great low end but done by 4500. thats when the v3 kicked in.
@Neomustangs
6 ай бұрын
i freakin love it. Now we gotta see if it actually performs first! It should have decent comp to make good NA power. with a hair dryer pfft man id have to be careful this thing will run outta rods lol!
@angry408w7
6 ай бұрын
honestly, put better fuel in it, maybe e85 with an ethanol content gauge from innovate, keep the timing conservative, rpm limit at 5500, it will live. Depends where you set that ring gap regardless, you need better fuel. or el cheapo mr freeze kit but thats annoying filling that bottle everyday. the price of powahh.
@Neomustangs
6 ай бұрын
@@angry408w7 it’s E85 already. Timing will Be at 16 total and 6400 is rev limit
@angry408w7
6 ай бұрын
well then..send it. cant wait
Wow bro I can't believe it's been a year already.
@Neomustangs
6 ай бұрын
So many things going on in the channel it’s hard to do anything fast
@GrandPitoVic
6 ай бұрын
I know that one lol
sweet build man...can't wait to hear the numbers. What is the distributer part# ? I'm putting the same setup in my cougar.
@Neomustangs
6 ай бұрын
Just a cheap replacement I found for 351 TFi
Absolutely sick build! What headlights are those?
@Neomustangs
6 ай бұрын
Smoked style
👊 👊 👊
I was wondering what compression those pistons and those heads would net you.. after hearing that first crank lol I am guessing “High”
@Neomustangs
6 ай бұрын
I have addressed this in other videos. Theres a whole play list on this engine.
Hell yeah, you finally got your shit off of the engine stand and almost off of the jack stands, that engine sounds good and running solid, its going to rip i think it should make 420-450 wheel, am I close cause I know its already hit the dyno 😂
@Neomustangs
6 ай бұрын
Has not actually. we gotta shake it down and engine break in. Hopefully it dont catch on fire haha
@79beans347
6 ай бұрын
@@Neomustangs maybe not 😅 that would suck 😅 I've been waiting impatiently forever to hear this motor run cause I was planning on building the same style motor because I have a 94 roller 351w in my old work van but then I ran across some dome forged pistons on marketplace for 30 bucks for the set brand new that I couldn't resist so now it's looking like I'm going to try them now 😁 Do ya think that it will make decent power 12:1 KB pistons ? I feel like it will do pretty fair, never tried any domes before, have ya ever ran any ?
@Neomustangs
6 ай бұрын
@@79beans347 domes would be kinda high comp!
@79beans347
6 ай бұрын
@@Neomustangs yeah it does toss any kind of boost out of the window for sure which kinda sucks I don't know I may try to just make a few bucks off of them and still stroke the 351w maybe I can get enough to pay for half of the crank or something
Sounds great ! At what point would you have to fly cut the pistons for Twisted Wedge heads?
@Neomustangs
6 ай бұрын
We didn’t fly cut anything
What size is your shop, the area where the cars fit? Looks like somewhere in the neighborhood of 22x40, not including the area where the shelves are?
Even with a roller cam, shouldn't the initial run have a little rpm to sling oil on those fresh walls?
@Neomustangs
6 ай бұрын
No it’s good.
Might be time to swap in a mini starter
@Neomustangs
6 ай бұрын
Battery needs a good charge
Hey I'm from MI. Iv bin trying to find someone that will till me whats a good small bird for a 302 I have a sn95 it's all stock what should I do . Iv never done a hole moter bild
Do you have any engines for sale?
My boyfriend is looking for a motor or have his looked at in his 87 foxbody can you help
Been wanting to do this build myself I’ve got the block but still have questions I can’t seem to figure out yet good sounding engine
@Neomustangs
6 ай бұрын
I will do a complete build again. Go slow with what parts are needed.
@dustinrussell5225
6 ай бұрын
@@Neomustangs I’ve got everything just can’t seems to figure out headers beings I have a 95 mustang I can’t find any
@Neomustangs
6 ай бұрын
@@dustinrussell5225 Just use the BBK ones i had in my other video from @BBKperformance
@dustinrussell5225
6 ай бұрын
@@Neomustangs were they the foxbody headers
@Neomustangs
6 ай бұрын
@@dustinrussell5225 yes
Do you need a adapter for a 351 h it's a 87 to bolt it to a manual transmission
@Neomustangs
6 ай бұрын
No
@jasonmurray9260
6 ай бұрын
Thank you I was told I did
@jasonmurray9260
6 ай бұрын
Thank you for all of your content it's very helpful
Any chance I can reach out, in the middle of a project and ran into an issue and need some help.
@vincebirth2528
6 ай бұрын
What’s the best way to reach you?
Is that rotella that you put in it
@Neomustangs
6 ай бұрын
yes sir...
How much horsepower is this crankshaft good for
@Neomustangs
6 ай бұрын
About what the rods are
@hotrodray6802
6 ай бұрын
@@Neomustangs Until it goes from together to apart
Why will you put the fuel regulator at the wheel well. That right there is a safety. If you get a blow out or a rock hits it, you going to have fire no matter what. You have plenty of space in the engine bay by the front of the right side tower. Make it easier on your self brotha.
@Neomustangs
6 ай бұрын
We have had one in my white cars well for 4 years. I’m not putting that in the engine bay
Hi there new sub . Would love to hopefully see you build a 01-08 5.4 regular cab f150 poor man's fp700 😂😂😂
Can you use stock 302 pistons with the stock 351 crank?
@Neomustangs
6 ай бұрын
No