Here is “One Guy” who gets the job done!👍👍👍

@theknifeconnection9571

Жыл бұрын

Agreed

People don't understand the amount of hard work and time this man is putting into our entertainment, thanks bro. I just found your channel yesterday with ypur newest video recommended to me out of the blue. Also, one part of this video brought back some vivid memories of my ex girlfriend, any guesses? lol

@NoNonsenseKnowHow

Жыл бұрын

Hey man, thanks so much for checking out the videos and yeah they definitely take a lot of time and effort to make that's for sure. Greatly appreciate you leaving a comment. And my guess would be you took your ex-girlfriend out and the boat broke down or ran like junk?

@budddove6480

Жыл бұрын

@@NoNonsenseKnowHow I'm actually binge watching you now bro. I literally found ypur channel in recommendations. I watched the new jet boat obviously, then the trashliner series, now I'm on part three of the air boat. Definitely going to subscribe now. The amount of work ypur putting into these videos is insane. I will definitely share with my buddies. I love doing the same kind of stuff, from helping little animals to cleaning up fishing spots and rebuilding old stuff to enjoy. The thing that reminded me of my ex girlfriend was when you were draining the water put of the drain hole ........lmao, sorry for the mental picture...haha. Thanks again for all your hard work and dedication.

@yellowdog2181

Жыл бұрын

I just found his videos, he reminds me so much of my cousin, then I found out he’s a couple towns away from where my family is from .

@PanosKalogeromitros

4 ай бұрын

😮suzukldr25 YAMAHAdr15vs

OMC Cobra.... OMC dumped an absolutely insane amount of R&D into that outdrive, gimble housing, tilt trim and the shift interrupt, they almost lived, they got the contract with Bayliner but didn't make enough in other sales to stay afloat, they were holding on by a thread for years and finely sold out to Volvo / Penta and that very outdrive is an incredible success, renamed the SX. Anyway, to say that parts for that outdrive are discontinued is a bit of an over statement, in tact and ready for service, it will easily fetch 1500 dollars. the 4 banger is an Iron Duke, they still use those in boats, forklifts, generators and cars, they are inexpensive long lasting little engines with a decent amount of torque. The boat was a POS the day it was made, everything about it is the cheapest available. Surprisingly enough this had the benefit of lightening up the hull by a about 30% of it's leading competitors .... God, i'm so ashamed that i know so much about these boats

@glenncrockett4451

2 жыл бұрын

We Called them Baysinker around here lol. Buddy had one with a Force Outboard and the first time I went out with him it blew the head gasket. Went thru the engine for him and the engine ran good for years even with a dead choke solenoid would fire up everytime for years

@thomassherry2672

2 жыл бұрын

BIL had one and it ran for years with normal maintenance. If I could find one now I'd buy one in a minute.

@M.TTT.

Жыл бұрын

all your knowledge about this wonderful piece of craftmanship makes for a great comment though lol

I don't know if he got the 50,000 views in the first seven days he said were needed to make him spend money on the boat to make it run or not. But he sure surpassed that mark now!! LOL. As of a little less than a year later it's at 776,805 views!!! Right on NNKH!! You're Awesome!

@NoNonsenseKnowHow

Жыл бұрын

Yeah pretty crazy how many views this ended up getting.

You deserve every follower you have Chris! I like watching your videos a lot, thank you for working hard to make them

I don't know about the east coast but here on the west coast these boats readily available for anyone who wants to put in a little elbow grease. I've been fortunate enough enough to break even by buying them and refurbishing them

I admire you're not afraid of some hard work. It's becoming more and more rare nowadays. Got my respect for sure bud!

@NoNonsenseKnowHow

2 жыл бұрын

Thanks man.

@ItsPolarHere

2 жыл бұрын

Stole the words right out my head

@timwegman5776

2 жыл бұрын

Yeah but is it worth it I mean this boat even fixed up can't be worth what you will have to put into it to get it running.

@DanielJones-nv3my

2 жыл бұрын

Chris that there is a true statement.

@cwatson42785

2 жыл бұрын

@@DanielJones-nv3my Thanks 🍻

This squirrel is so nice. I didn’t think you could pet one. This is fresh.

Your like the New England version of a bush mechanic. It’s a term for the gnarly northern Australian people who do anything to fix a vehicle. Makes for very entertaining content!

OMG that’s my boat! I was out of the country and thought it was stolen! I never had it registered in my name so they couldn’t locate it

@M.TTT.

Жыл бұрын

no way, was it really? Was it registered to someone else or you don't need a name for a boat trailer/boat in PA?

If we keep it, what shall we name her? The Trashliner? Lol

@thebeek123

2 жыл бұрын

Treeliner 5000

@downstateradv

2 жыл бұрын

Obviously

@joshb124

2 жыл бұрын

Trashy McTrash Boat

@adamconnolly4620

Жыл бұрын

Bottom of the Bay

Regretting bringing home "junk" cracked me up. Sometimes I'm like..."why do I do this to myself"

@NoNonsenseKnowHow

2 жыл бұрын

Lol, yeah this thing's an ugly sight in the backyard.

That is the good thing when you are a bad ass mechanic. People and insurances company throw things up because they don't want to deal with them and you can come, fix them, keep them and re-sale it ..

Good video. There is something so satisfying about putting a new, clean sets of wheels and tires on an old trailer. Gives me motivation to get back to work on the broken boat that I shouldn’t have brought home either. Haha.

You're lucky those cables didn't come back into the windshield when it broke off trying to get this boat out. Wow

@NoNonsenseKnowHow

2 жыл бұрын

There wasn't a lot of line out. That's more a problem when you have many feet of line out. Plus I had my head down beneath the dash when I reversed

I’d yank the engine and out drive , steering cable and wheel and switches and cut the boat up but keep the trailer also ! Basically strip it so another boat may live ! Haha 😂

For a rust locked engine, or one that has rust in a cylinder, before trying to start it, put some white vinegar in the cylinders, let it sit for 30-45 minutes and usually will unfreeze and as the vinegar dissolves the rust, helps free rust stuck piston rings, and gets a lot of the rust out of the cylinders, gives your rings a better chance after an oil/fuel mix startup. try it, use an engine you thought was so rust stuck it would need disassembly to repair, then you can really see how well it works. might leave it in that type of stuck engine an hour or 2, even overnight.

@NoNonsenseKnowHow

2 жыл бұрын

Great tip for sure. I use vinegar to clean gas tanks a lot. This one wasn't locked up too hard though

Cuteness over load with the squirrel, he’s lovely.

@NoNonsenseKnowHow

2 жыл бұрын

He really is! I hope he sticks around and continues being a little garage helper squirrel

It just amazes me how you beat the crap out of your Toyota and it just keeps on tickin'.

I have built boats for 14 years between several companies: Seminole Marine (Sailfish and Southwind boats) Edgewater Power Boats, Brunswick (Sea Ray line) and everglades. I would love to find some of these freebies you have or at least one to restore. Kudos to your efforts and work.

@NoNonsenseKnowHow

2 жыл бұрын

You anywhere near Pennsylvania? I would gift this boat to you if you had plans to restore it. I mean I really don't think an old bay liner like this is worth the effort. Probably worth it to get something way more unique.

@DL30Creations

2 жыл бұрын

Sadly no I am in central Florida. Lived in Hershey for 2 years but back home where no snow is a go.

Looks like a 3510 starter. You can probably get one at a junkyard for $15.00. You might even have one laying around. Came on tons of GM products from the late '60s to the late '80s.

@c0c0asauce

2 жыл бұрын

I was gonna say it looked like a BBC starter.

The hull looks good , the iron duke will never wear out . Just the glass on that thing is 300 to500 bucks . I would strip it down and build the interior .

The boat that thought it was a submarine!

The first 6 minutes or so were pretty satisfying.

@NoNonsenseKnowHow

2 жыл бұрын

Thanks for the feedback.

hihi squirrel steals the show so cute

Thanks for getting it out of our yard!!!

@NoNonsenseKnowHow

2 жыл бұрын

No problem! Good luck with the house sale

Gloves bro, Gloves!

@NoNonsenseKnowHow

2 жыл бұрын

When?

I like the squirrel hanging out while you work..

All that's left of that boat is the hull, engine and some of the instruments may be okay. The wood inside the transom may even be rotted out and need to be dug out from the inside, then re-glassed. All the flooring and other interior structures have to built from scratch. Huge job. I rebuilt a 17' Sunbird, another OMC boat. Not as far gone as that one, but it had stuff growing out of the carpet also. I was lucky it had an outboard, in good shape on mine. But that inline 4 may be okay also if it will run.

got mine for $250.00 bucks every one said these are trash ! ;[ I still have it its been 7 years since I got it very easy to maintain I'm very happy with it .

Good stuff. I have the same engine and it's nice to see it opened up.

Love the boat videos. Amazing stuff to watch!

OMG i wish we had squirrels here in Australia .... i so love them

LEO IS KING !!

You should do a video on what to look for on a jet ski

I bought an 88 bayliner Capri that needs a new exhaust manifold and manifold elbow riser cause there’s a water leaks where the gaskets are between the two. Looking forward to getting her back up to par though, 120hpf on the water would be great this upcoming summer🤙🏾

@NoNonsenseKnowHow

2 жыл бұрын

Heck yeah man sounds like a plan

Great job .

Awesome

I love this content ❤ I'm really excited to see more videos just like this! 😃 Subbed!!!

Dude! I’m impressed!! You are not afraid of a challenge.

@NoNonsenseKnowHow

2 жыл бұрын

I wouldn't say that. Nothing to lose, tinking around with this old junker. You're the guy taking on big challenges working on high-end stuff! Incredible work you do

@RebuildRex

2 жыл бұрын

@@NoNonsenseKnowHow thanks man! Sometimes I think I’m just a glutton for punishment.

@NoNonsenseKnowHow

2 жыл бұрын

You certainly are!

Oh man....that Kawasaki! Sweet 😋

these are my favorite types of videos! good stuff man

@NoNonsenseKnowHow

2 жыл бұрын

Sweet! And thanks

New driver . Lol dang near took out that stump

Very good work on the “trash liner

You’ll get it! You always do.

Leo is looking healthy!!! That boat not so much but hey for free you really can’t go wrong regardless of what you do with it. Thanks for sharing. Would be cool to see if it would actually fire👍🏻

@NoNonsenseKnowHow

2 жыл бұрын

Yeah he's been packing some weight on for winter! I hope he makes it through the cold season. And no problem, thanks for checking it out. Probably end up doing a part two to see if it will run. Going to be a smoky mess I'm sure if it does

Yesss another boat restoration

@NoNonsenseKnowHow

2 жыл бұрын

Lol

Gotta love those 2.2 engines! I have one in my 3/4 NASCAR

Master!Much greting from Serbia!

Shes got the FRAM!!!!

Nice job Chris!

@NoNonsenseKnowHow

2 жыл бұрын

Thanks mad Murdock

Another option based on what you said. If everyone wants to see a part 2?, Then let them chip in and pay for the starter. Me included When you get enough money, ya buy the starter. Just a thought.

So happy to see a new video come up! I love your videos dude! I just bought a box of cookies from Wawa so I know what I’m doing later!

@NoNonsenseKnowHow

2 жыл бұрын

Lol. Hell yeah, sounds like a good time. I greatly appreciate the support. Thank you.

Absolutely loving your content also learning alot

@NoNonsenseKnowHow

Жыл бұрын

Awesome to hear that and thanks so much for tuning in

Yeaay LeO!! shout out from Scandinavia

I say make a u pull it run for a similar starter that will bolt up and video tape it. People will like seeing the junk yard and the search for good parts. It’s kinda like hunting for rusty treasures. Lol. If it runs then strip the interior and sell it as a project. Or it could be called dumpster fire and you keep it for river exploring.

We had one of these. It was an 1988 or 89. I can't remember. It had the 3.0L 4cyl. Something like 135hp (I think). Ours ran great and we never had a problem with it. But we took care of it and never left it out in the elements. Only thing we hated about it that I can remember is that it was loud as hell. We sold it about 7yrs later and aside from a little UV fading of the dash it looked and ran great.

100% we want to see you do the impossible. Dam right I want a part 2.

Good work man , i am extremely motivated

dude , that's my boat !!!🤣 olny kidding

Love project s like this 💯 👌

after seeing your vid I would have let the local council pick it up for disposal. I know Its sounds harsh but that Sir is life.

Nooooo!!!! We want to see the Trashliner live! I will send u a starter, cap, rotor and plugs.

@NoNonsenseKnowHow

Жыл бұрын

Theres a part 2 3 and 4

Ah another boat, the Bayliner2000, probably sitting in the woods with rusted engine since 1982 :D .... Unfortunately this boat cannot be saved, but maybe there is at least a limited edition David Hasselhoff cassette in a tape player somewhere in the cockpit that can be salvaged and sold on eBay. And Leo is already waiting full of curiosity what the next barnfind (or forest treasure) will be. I am jealous of this tame squirrel - it is so cute!

Fun to watch

Get the starter!!! You'll then have 2 swamped motors running again. Doooo it!!!

kinetic ropes are the bees knees lol saved me many times

Those starters always failed and the replacement could not get wet in a boat lol!

Put the starter in!

@NoNonsenseKnowHow

2 жыл бұрын

Putting part two together now

Bayliner,s make the best flower pots. You can find these everywhere mostly used for garbage cans after they stop running which in most cases is relatively quickly do to owner lack of maintenance after the first season. What I love here in Michigan is the high school graduates that post the trailer for sale but you have to take the boat, which costs about $50 bucks per ton to dispose of. But usually the trailers are in no better condition because the were mass produced, cheap with a short life span especially if you didn't invest in a quality cover to keep the water out. LMAO. I restored a 1987 Chaparral villain ll only because they are still sought after. Cost a lot, broke even, won't do it again because I Hate Hate Hate fiberglass work. And it has to be done right.

Fun video!

I had this exact same boat. Those motors are nothing but problems. Gas is 2 days old and it doesn't want to run properly. Use it as a reef marker

I like it. Thanks for this clip!

thanks for teaching us mecanic

Go for it

Or do a patreon and see if people will donate to getting it running. I would. 1 dollar person goes a long way.

@NoNonsenseKnowHow

2 жыл бұрын

Would be awesome to have some extra cash, but that seems like begging. Idk... Unless I was doing something charitable with it then maybe.

Hoping for part 2

Get it running, it will be worth it.

Look up under the manifolds for a crack in the side of the block before going any further. That's where those motors cracked when they froze with with water in them

Wow this gives me hope to get my seadoo boat going that's been sitting for a few years. That thing was really rough lol

@NoNonsenseKnowHow

2 жыл бұрын

Those old Sea-Doos can be pretty problematic when they sit for a long time. I had a Challenger 1800 a while back and after taking apart the engines, they had so much corrosion they were basically junk

@cwatson42785

2 жыл бұрын

@@NoNonsenseKnowHow I'm lucky as it has a rebuilt crate motor that we put in like 5 years ago. Just needs some good tlc and re wrap the seats. Me and my old man had to put a new magneto/stater(?) In it cause it wasn't holding a charge. Buy the past few seasons just haven't had the time. That's why I loved grabbing that jetski as I've been able to have a little fun!

@NoNonsenseKnowHow

2 жыл бұрын

Oh got you, yeah you should be good then!

The squirrel is the star attraction

Beautiful to see a Kwaka LTD sitting there in your garage !!!!!

old trailers and boats are fragile, gentle pull will save from extra work. But I guess whatever is left of that boat is in good use.

Leo is so cute!!!

@NoNonsenseKnowHow

2 жыл бұрын

Yea. Come visit him sometime

We need more of Leo

Very cool 👍🏻

It would have been good to see part2.😊

@NoNonsenseKnowHow

3 ай бұрын

There's a part two and three on the channel

i suspect the boat looked like that long before the flood that washed it up.

Honestly. Walk away when you see OMC the outboard. I do appreciate the effort and Leo

That's all I bring home is junk! Get the starter, for our sake, we can get alot of people to pitch in 5 bucks for the starter and a big can of wax! Fan in Florida.

Fortunately the boats ugliness is offset by Jenns beauty. Enjoy this stage of life you're in!

Nice

Nice sweep job on the tire change, your mess, you cleaned it up... memba the last vid or so?... have a good one and great content NNKH.

@NoNonsenseKnowHow

2 жыл бұрын

Haha thanks. Yeah if I make a mess around the machine I clean up after myself but I've cleaned that thing before and a couple days later it's covered in wheel weights and crap again. Not worth it.

@NoNonsenseKnowHow

2 жыл бұрын

Hilarious how many people are complaining about the dirty machines in that last video though. Maybe that's what caused it to get so many views. Bunch of haters

@moofdoggmike

2 жыл бұрын

@@NoNonsenseKnowHow no hater here, those of us that pay attention see your order and cleanliness in your work , work space and at your home Garagemechanic-hall! Have a good one. And keep it up. Learn a lot from the vids. 👍🏻

@NoNonsenseKnowHow

2 жыл бұрын

Thanks man. I greatly appreciate your support and awesome to hear that you find some useful information in these videos.

Good work on your “trash liner”. I am in need of aOMC 3.0 carb. Do not matter if it works, 2 jet rodChester. Let me know,

@sallucido852

2 жыл бұрын

No, I just need the outside linkage.

Love the earthquake air ratchet !

Glad I found this channel. 😬

What did you do? Love it. Been there, done that. Great video.

Did your wife tame a squirrel? Because that is beyond awesome.

Tá aí um canal que assisto mesmo sem fala inglês mas te distrai do começo ao fim se vira corre atrás ,essa veio da enchente, restauro raiz .

Just checking back in want to see that 50k!!!!