Thanks Lee. Worked for my ardupilot setup and the radiomaster mk16s mk2

Back in days i got stucked with naza window 7 issue and you helped me now i got stuck here only you're the one who helped ✌️. Always appreciate you 👍🏻👍🏻👍🏻 whenever i get stuck i see you standing with you valuable teachings 👍🏻👍🏻👍🏻

cheers Lee slowly picking up opentx

Still useful in 2022. Thanks for sharing!

Thank you so much. Very details. Happy flying

Thanks, worked like a charm for my pixracer build.

Thanks Lee, the only video on KZread that shows how to do this! Great!!!! One thing, make sure you have the 6 position switch calibrated or this doesn't work. Don't ask how I know 😂 When I got the radio I calibrated everything BUT the 6P switch, didnt even know it was a switch at the time :D

@geterdnboy

2 жыл бұрын

this comment should be pinned it took me several videos until I came by your comment thanks so much

great tips as allways buddy.thankyou

Thank you, you always save me a lot of time! TA

Thanks, great video

Great video thank u. Yes I did exactly as u did and it came out good well I'm learning with u guys because to tell u the truth I got in the hobby not knowing what I was getting in so now that I'm in all the way to my neck I'm not backing up no matter what lol thank u.

great video 🔥

That's really interesting, Lee! 😃 I remember seeing that you need to do something similar when using the NAZA Lite... But I guess it could be done in the same way! 😃

coool ;) is not the first time you give the curve. thank's! ;)

Great videos always, I've been watch your video about how to using jumper T16. It's my first time using jumper and RC plane TX, and I'm using it on RcCar model. I have questions, how we show/input text on my label widget?, And my T16 on monitor/statistics always showing unstable value on L/R stick is it normal? I have a video about this

heyho I have a question: I need a radio... (I've got the flysky i6s) What would you recommend? Would you still recommend the Nirvana? or Should I rather buy the jumper t16 or a frsky?

Could you please make a video regarding the usage of the jumper t16 audio jack as trainer port to connect 2nd transmitter as slave, I have flysky fs-ct6b transmitter. How can I connect this transmitter to the jumper t16 audio jack??

Don't know if it's just me but the Jumper 4 in 1 runs the SPI receivers in D16 without issue. I have the BN220 on Trashcan with all that kewl telemetry INav on radio and betaflight on Flight controller. Gonna try the arupilot when they get the google maps screen working.

i did this on a radiomaster tx16s and it works great. when i created a new model for plane these modes are also on it, is there something i can do to get them off the plane model but still have them on the other

Thanks. WIthout you, my life is meanlingless :)

what receiver are you using. I set up the switches on my T16 according to this video but I am not seeing the channels in Mission Planner

@Painless360

4 жыл бұрын

Check you can see them in the channel monitor first.. Best of luck!

I feel like I should already know this, but if I've configured Acro and Loiter to be assigned 2 channels(with separate switches) in MissionPlanner>Config (RC6_OPTION-52, RC12_OPTION-56) can I also have Acro and Loiter present in the 6POS? This is how I initially set it up, just so I could have a physical switch at my fingertips as well. When I'm flying, it only will stay in Acro generally. I've checked it fully powered up and connected to MissionPlanner and the 6POS is functioning correctly and the PWM numbers are correct for all 6 modes. I"m guessing you can't have the same channel in two places, is the issue.

@Painless360

Жыл бұрын

You could setup the switch to override the 6 position switch.. That would be one way.. Happy flying

I have followed your video and set up the 6-position switch on ch6. Now, how do I make ch6 actually output the values to my receiver?

@Painless360

4 жыл бұрын

If you are new to OpenTX then check out the OpenTX Mixer School nad my setup videos for those stabilisers on the channel. If it is setup in the mixer tab for Ch6 then that is where it'll come out! :D

Hi Lee I set up the six switches on T16S for flight modes on mission planner. On radio calibration they work fine, but in the flight modes section the modes don't change. Any ideas?

@Painless360

Жыл бұрын

The default mode channel is different for Arduplane and Ardcopter. See my Pixhawk 2020 setups for the detail.. best of luck

A question if I may... Suppose I would like to protect one of the modes by another switch, for example I'd like to set mode 4 as "Auto mode" but since this is a risky mode i would like it to engage only if in addition to pressing button 4 I'll flip switch SD. Is there a way of doing that? Logical switches maybe?

@Painless360

3 жыл бұрын

Yes. Check out the OpenTX mix school where I show that. Best of luck

@RechlerDudi

3 жыл бұрын

@@Painless360 thanks for the super fast reply! You are the best!

Hey Lee, do you have any experience with a Frsky Tandem X20S? I got this radio, it's a beauty by the way. Working on a quad. So i kind of have a similar setup, this transmitter has 6 buttons on it but i don't think they act as a 6 position switch. I couldn't find how to assign normal radio commands to them, would like my six modes to be those six button. I did get 6 modes working on 2 switch, as per other videos, but the problem is it seems to hit the middle mode for a second, before it adds the offsets to then kick to the offsetted mode. This resulted in me briefly going into stabilized mode from alt hold, throttle was a little high, craft climbed like a rocket right into a tree, broke three props in one go. I am okay with the 2 switch setup, if i could get rid of it hitting the interim mode while switching. This radio does have a couple settings not mentioned in the OpenTX videos. Any help would be appreciated, and while i'm at it, if i get an answer, is it possible to pass GPS info from a FrSky GPS V2 to a Orange Cube? I ordered a 'here 3' but they are majorly backordered. I got the yapuu telem cable connected, though i also don't see what seems like any telem coming to the radio either, so possible i haven't set it up correctly. I may need the script running to see anything on the radio side, and they haven't written the script for it yet, if they ever will. Little disappointed here. I thought at least the sensor outputs would come through. I have zero experience with OpenTX, this is my first 'real' radio, first quad. Jumped in head first as you can see!!!

@Painless360

2 жыл бұрын

I have a video on how to do that - kzread.info/dash/bejne/lWGZtcqSm8anZ8o.html may help.. Best of luck

Is there a way of having custom audio for each of the six positions?

@Painless360

4 жыл бұрын

Yes. Check out the OpenTX mix school playlist.. best of luck!

wow, I had no idea those little lights were actual buttons on the TX16S lmao

Which are better make radios taranis or jumper? And what is the major difference between those two brands

@pawanv86

5 жыл бұрын

I'd say that FrSky is a very well tested brand in the RC community. That being said, Jumper is relatively new and hasn't undergone extensive testing. Though many positive reviews have come across about it, I'd make a decision based on if you want a radio that can actually be programmed to its core or if you want an easy to use radio and don't care much about programming. I'm not sure about the range on Jumper and how well it handles interference and all of that, but FrSky's protocol is definitely one of the best.

@darshitdesai

5 жыл бұрын

@@pawanv86 thank you for your reply I also checked Jumper's website there is no mention of range which is definitely a grey zone.

How to connect the T16 to a Computer for using it with a Simulator? Ist it possible at all?

@Painless360

5 жыл бұрын

Yes. Please see the OpenTX mix school..

how is this radio in direct sunlight as far as reading the screen?

@Painless360

4 жыл бұрын

Very good

Thank you for preparing this video. Not many people address to the use of Jumper with Ardupilot. I set up the 6 modes accordingly, but found out the pwm corresponding to the 6 buttons on Jumper T16 ranges from 1101 pwm to 1446 pwm only, while the 6 flight modes dictated in Ardupilot Mission Planner ranges from 0 pwm to 1750+ pwm. This means I can only reach 3 modes, while modes corresponding to 0-1100 pwm is inaccessible. I have changed the curve to the maximum of 17 points. This does not help. Any suggestion ?

@Painless360

2 жыл бұрын

Your only option is to edit the curve. Make sure that the radio is calibrated to get the full travel for those six position switch array.. Best of luck

@frankiefung4043

2 жыл бұрын

@@Painless360 Thanks for reply. Today, I watched your video again. I re-calibrated the Jumper T16 by pressing each of the 6P buttons, along with sticks and other switches, but that still did not extend the range beyond ~1400 pwm. I edited the curve with all possible values, changed weight to -100% in MIXES, put some values in offset, all these did not help. Any clue ?

Bonjour, est ce que cette radiocommande peut être compatible avec le récepteur R14FA ?

@Painless360

7 ай бұрын

m.youtube.com/watch?vDfKyx0yTbXU shows how to check. Best of luck

I accidentally created an extra flight mode. How do I clear it? I can zero the name and the trim values but not the activation switch...

@Painless360

4 жыл бұрын

Just make sure you can't select it with a switch and it'll never become 'active'..

@doronby

4 жыл бұрын

@@Painless360 That's exactly what I did but I was hopping there is a secret way to clear a FM line...:)

Will this strategy work with tbs 900mhz and sbus?

@Painless360

4 жыл бұрын

It doesn't matter what module you're using. Happy flying!

@k4jsteward

4 жыл бұрын

@@Painless360 I'm having trouble getting the pixhawk 4 flight modes working with tbs receiver and sbus. Everything else works great! Thanks much! Stay well

After 2.3.3rc1 it doesnt work anymore..

for me is -90 -40 -15 20 60.. on radiomaster t16 ;)

When you're in any of the model menu pages except page 1 and page 2, press and hold the menu button.

@Painless360

5 жыл бұрын

There isnt a menu button...

@sparrow082

5 жыл бұрын

@@Painless360 upper left-hand just above page? Maybe it's a frsky thing? If I hold down the menu button on my X9D, a Channel map pops up. I find it incredibly useful, it works even when editing an input or a mix.

I just got my Jumper t16 pro and when I turn on my radio the screen back light goes on but nothing comes up...i also hear switch warnings but nothing on the screen....is it defective or am i missing something ??

@Painless360

4 жыл бұрын

Sounds like it's defective to me.. I'd return it..

@TheHelicapt

4 жыл бұрын

Painless360 Ya. I’m going to send it back.