Link to where you can download my VKB Gladiator NXT Joystick Gremlin Profile - subliminal.gg/bindings/

@wtfox_yt

5 ай бұрын

Page seems to not be available as of today...

@wtfox_yt

4 ай бұрын

Update: Working again :)

@AdamRinne

3 ай бұрын

@SubliminaL there's no link to the JG profile for NXT, just the Flicon. Where can we get the one for NXT? TIA!

awesome - I am just some 3 minutes into the video and already I am hyped by the quality and information I can get out of it. I was looking especially for this. Thank you so much!

@SubliminaLstv

6 ай бұрын

Great to hear!

JG has a bit of a learning curve, but the power, flexibility and QoL it brings to the table are SO worth it. I'm so glad I spent a week learning to use it it a couple years ago. Fun fact: JG was written by WhiteMagic, a SC community member, out of sheer frustration with SC's sorry excuse for an input configuration system. Worth noting that vJoy devices are always in the same order, so no resorting even if you do use multiple.

@SubliminaLstv

6 ай бұрын

Totally agree! And nice to learn about the no resort!

Thank you, I've been looking for this for the longest. It sovles a lot of my issues.

I've needed to do this for quite a while. Thanks for walking us through the process.

@SubliminaLstv

6 ай бұрын

Glad it was helpful!

This is EXACTLY the video I was looking for. Thank you.

Thank you Subliminal!!! Got everything setup again with ease thanks to this video!!!

Thanks! Best tutorial I've found on Joystick Gremlin, HidHide, and vJoy. I got used to CHP manager years ago, but was struggling with Target, this is the first practical vid I found with clear, useful, easy to follow instructions! Really appreciated!

@SubliminaLstv

4 ай бұрын

Glad it was able to help!

These tools are a life saver. I've been using them for a while now. I have a racing pedal set that I use as rudder pedals and using these tools make it so that each pedal shows up as half of one axis. My daughters have some games that go crazy when it picks up certain input devices, like my 3Dmouse. With hidhide, I just disable all devices not being used by me so those inputs don't interfere with their games.

I should have watched the video through instead of inputting along with you, i was thinking "what about pedals" "i loaded your profile but it doesnt work". Such a good guide, thankyou mate, you are a good knt. much love from Australia

Subliminal discovered Joystick Gremlin. This is a good day. welcome to a great piece of software!

@SubliminaLstv

6 ай бұрын

Happy I found it.

I really appreciate you going to the trouble of making these vids. I'm having some trouble with my Logitech Extreme 3D Pro right now, but the problem just isn't worth installing and configuring three different pieces of software.

@SubliminaLstv

6 ай бұрын

Yeah JG is overkill for just one Joystick.

Very handy. I'll save this for later.

Oh, sweet, I was trying to theorize how you had the axis profiles set up on JSG and here's my answer. I was trying to play around with it all day yesterday using two virtual devices instead of just the one and got it to where I felt comfortable. I'll need to use your method when I get home from work tonight and see if I like that better. (btw MUCH better audio quality overall, I know you had multiple comments on it last video but that Beacn will definitely take you far)

@SubliminaLstv

6 ай бұрын

Thanks! The MV7 isn't a bad mic. But the audio interface I was using is more complicated than what I need. It is designed for musicians to record vocals and an instrument. And I could just never get the EQ right. Beacn is just made for content creators so it was setup in an evening.

This video answered my question perfectly. I have a hotas which are two separate devices, but Freespace 2 only recognises one.

Awesome guide man! I'm so sicked and tired of resorting my sticks like 3 out of 4 times playing.

you're a hero bro

Thx, it will save my mind. SC and fs2020 are making me mad at controls until now. 😂

great video but I ran in to issues related with in ability to follow instructions, So I just paid for the non Vjoy Bindings, Cheers for putting in the effort.

Thanks for the Info

@SubliminaLstv

6 ай бұрын

No problem!

You are the best!! Thankyou!

@SubliminaLstv

6 ай бұрын

You're welcome!

thank you for all the work and great content, Subliminal! For one of those analog sticks, been thinking about mapping the gimbals to one - what do you think?

I've been using this setup for about a year. It was a real learning curve to set everything up with my Virpil gear. I wish there had been a video like this back when I started. Good job. If you do a follow up video, it would be nice to show others how to setup the virtual devices in SC. In particular, how to deal with patch drops where you may need to nuke the User directory. I've avoided touching that directory on patch drops simply because I'm unsure how to get back to where I was with the mappings before the patch. So far, the new patches are working OK with just nuking the shaders, but I don't know when this won't be enough.

@SubliminaLstv

6 ай бұрын

Thanks! One thing that stood out in your example on a follow-up video was when you said "where you may need to nuke the User directory". You should never nuke the user directory without first backing up your bindings. I do have a general joystick FAQ video in the pipeline that will address this and more common mistakes people make.

@javadan

6 ай бұрын

@@SubliminaLstv Looking forward to watching it.

@lcnevar

6 ай бұрын

You have all this features and more in VPC Configuration Tool, you don't need additional software.

@javadan

6 ай бұрын

@@lcnevar I'll look into it. I haven't really used that tool because I already knew Gremlin as I used it with my older setup which was a Warthog.

@dorfkind9825

2 ай бұрын

@@SubliminaLstv let us know when it's out, btw. great video helped a lot set everything up in the next days I'm off to get the bindings started, with that a video/faq on how to back everything up would be much appreciated

Thanks for the video its about as clear as could be for some pretty difficult software functionality. I'm hard stuck setting modifiers on VIRPL CON ALPHA sticks and could use some help, please! I created the Modifier Mode and assigned it to left pinky button, but I am confused how star citizen "recognizes" the modifier and differentiates it from the unmodified keypress. I'm trying to assign a button to have a primary function (VTOL for example) and another modified function (LANDING GEAR for example), when the pinky modifier is pressed first, but i'm only getting both VTOL and GEAR activating simultaneously on an unmodified key press, and then nothing happing on modified key press. Gremlin is successfully hiding my primary input (VTOL) when the Modifier Mode is activated, which is what I want, so that VTOL is not activated unintentionally, but how do I get it to permit the LANDING GEAR input instead; and then conversely while in Default mode? I checked your discord but couldn't find much around Virpil gear and some of the video tutorial didn't exactly match; i.e. some areas diverge from the instructions, specifically the parts regarding encoder dials, sliders, z rotations and others.

I can't seem to get this to work. I can load the profile and my left stick works fine. but every time I try to test the right stick it throws an error. I think it may be because my right stick is an evo rather than regular nxt. is there any way to work around this?

I just wanted to add an issue I had setting up 2 VKB Gladiator EVOs. When I followed your directions on turning the hat into buttons, it simply did not work for me. What I had to do was scroll down past "Key 128" in the left column and there was "Hat 1". I just assigned buttons 30-33 to Virutal Buttons - up arrow, down arrow, right arrow and left arrow. I'm thinking Joystick Gremlin might have changed something since you did this video. I hope this helps someone in the future. And thanks for the tutorial! Windows should just let you assign static device numbers to your devices.

This is Legit, thank you! When is the Mark IV review coming?

@SubliminaLstv

6 ай бұрын

I recorded my unboxing of Flicons new joysticks and am going to start editing soon. Once I'm done with that I will start writing a review of the MKIVs. So maybe in the next 2-3 joystick videos.

@Aundreen

6 ай бұрын

@@SubliminaLstv Awesome Thanks! I'm ready to buy new flight sticks next month after watch the live with Buzz & Noob, I've been intrigued by those particular flight sticks.

👍 Thanks!

@SubliminaLstv

6 ай бұрын

No problem!

I am a bit Confused, HOw do I get the hide to just show my vjoy to star citizen?

I messed up somehow and could only get a few buttons to be re-mapped. How do I reset my controller after doing this? It's no longer responding even if I have uninstalled everything.

Mah man thank you

So with 3.23 and the new keybinds do I need joystick gremlin or anything? I have the nzxt evo’s. This seems very confusing to me. Still a new player.

I can't get joystick gremlin to start on my system. i have vjoy and hidhide open. I've tried running joystick gremlin in administrator mode, but still no "joy" , see what I did there?lol

Thanks bro, actual useful info on this nightmare setup lol

Thanks for this! The changes in 3.23 are kind of nuts to the controller bindings. Nothing is working how it should and even Tolbi doesn't seem to want to work right.

@SubliminaLstv

2 ай бұрын

Yeah, I noticed eye tracking isn't working.

The profile for 3.23.1 seems to be empty for gremlin, also my right stick isn't being picked up at all. Everything was fine up until the patch drop. Any ideas?

Sorry, I'm a little confused by any steps after this. How do I get Star Citizen to use vjoy device #1, and once I do, the next step to move the layout files to the controls/mappings location? Thanks to anyone who can help me with this. I even used Hidhide to hide my VKB,s and windows sees my Vjoy device but it looks like Star Citizen does not, or it's not working with the mapping somehow.

I need help if anybody can help. Not getting much help on VKB discord. I have this exact set up, but my twist is automatically inverted. Some of my axis is normal but my yaw on my right stick and my throttle and twist axis is inverted. What can i do to fix this if i already flashed my configs with the vkb software?

Please, I did all as you instructed. After, I went to SC and tried to apply the settings to the advanced setting Gladiator NXT stick, the settings as instructed, don't work. SC doesn't appear to recognize the dual sticks. Do I have to set each individual settings to each right and left stick in the game? I'm just not understanding this. I thought that after I did as instructed in the video, the game would apply those settings to the game automatically. Please advise. Thanks

@SubliminaLstv

2 ай бұрын

As I stated in another one of your comments I have a video that takes you through the steps of how to make sure everything is setup in JG all the way to how to import them into SC. kzread.info/dash/bejne/n5dh0dyCn8rYoKw.html This video you just watched was a guide that shows you how the program works. Glad you watched it, it will make the rest easy.

Can we utilize the VKB lights in the base calibration software, for mode identification?

@SubliminaLstv

2 ай бұрын

Not to my knowledge

This is awesome stuff, really helped me to understand how Joystick Gremlin works, as I have seen it mentioned so many times. Do you know if it adds any extra lag or input delay, compared to using the joysticks natively in-game? I assume the software adds an extra bit of processing acting as a middleman, so was wondering if there's any downsides to using it.

@SubliminaLstv

5 ай бұрын

I have never heard of or experienced any type of delay. 😊

when I loaded your profile on my gladiator evos i cant get the buttons 31-33 that are supposed to be mapped to the Hat to work. Is this maybe something in the vkb software? I just followed VKB's setup tutorial and havent changed anything since

@SubliminaLstv

2 ай бұрын

Ministick to buttons is a feature I disabled in the 3.23 binds. I am now using a modifier so we get double the buttons. Instead of clicking that in and getting buttons yoiu just hold the modifier and get more buttons for every button in the grip.

@spawnandbatman6975

2 ай бұрын

@@SubliminaLstv oh I see. Okay sweet. Yeah for now I’m running the basic but I’ll check the advance one out and set it up. Thanks for the response!

I'm using the dual Thrustmaster T16000M's but I have no idea on where to find their exe to exclude them as I didn't program them (the Thrustmaster TARGET program is bad ?): how to I add them to HID? there is no discription on how to set it up as far as I have seen? Many thanks: I would like to try this but am not able to: great video! Will try to set it up.

@SubliminaLstv

5 ай бұрын

As long as thrustmaster target isn't installed you don't need to hide it., 🙂

@AmanoEu

5 ай бұрын

@@SubliminaLstv many thanks!! It was a headscratcher for me haha, love your content man, keep up the good work! 🙂

So Star Citizen is still seeing my joystick in windows and not seeing the Vjoy profile. how can i fix this?

@SubliminaLstv

2 ай бұрын

Your HIDHide settings are wrong. Please join my discord there are screenshots of how it looks and info on how to get around game bugs.

Can you make axis to button tutorial? Lets say, if the axis is more than 0,5 to 1, button X is hold pressed, and when centered the X is released? I cant sort it out :/

@SubliminaLstv

5 ай бұрын

I did that in the video, unless I'm misunderstanding. I made the analog ministick press nothing while centered, and when it moved positive in the X axis past 75% it pressed a button until it was released below that threshold.

@PetrPolach

5 ай бұрын

@@SubliminaLstv I tried that for zoom in VR in DCS on throttle axis. It wasn't working then I was remaping to keyboard. But when I set it to VJOY button, its working as intended - so finally it works and Gremlin openned whole new level of posibilities. (modifiers, long vs short clicks!!). Thx for answer.

Trying to import your 3.23 advanced profile, having some trouble. It crashes after importing and swapping devices, until I made sure i had vjoy 1 and 2 enabled (need both or it will crash). vjoy 1 and 2 can not have same amount of buttons, or crash. I set vjoy 1 to 127 and vjoy 2 to 128. Now, it's not crashing for me anymore, but it is not mapping correctly. . left throttle dial moves axis 3 and 4, and twist axis moves 3 and 6. ministick analog seems to be axis instead of buttons. I'll try to edit it and see if I can get it right

@jamesgraham2961

Ай бұрын

Did you figure it out? Having the same problem :(

@VoltKraken5555

Ай бұрын

@@jamesgraham2961 Yes, sorry forgot to edit. You need to do the remap option but only bind the sticks and not the bases. I stopped using JG though and went to the basic profile, just so I wouldnt have to set up elite and x4 for JG too

@jamesgraham2961

Ай бұрын

@@VoltKraken5555 Thank you, I'll give it a try! Least there's always the basic option to fall back to 😅

How does this work with your keybinds for the VKBs already using the non-joystick gremlin set up?

@tomchappy3388

6 ай бұрын

Was wondering this also. My VKB's should be here in a day or two. Did you figure it out mate?

@desertbum8

6 ай бұрын

@tomchappy3388 Yeah they are incompatible. You would have to remind everything. Don't use this if you plan to use his keybinds currently.

@SubliminaLstv

6 ай бұрын

These will not work with my keybinds. I will have a new set soon.

@tomchappy3388

6 ай бұрын

Awesome. Look forward to it. So much info out there atm, Not sure what "guide" to follow. New player, new to sticks and not great with PC's. Good combo "D@@SubliminaLstv

Hey quick question, u mentioned the trustmaster ts16000m, i run dual stick of those in my setup, but i cant find the config file u mentioned, 😅😅 would be very helpfull tho :)

@SubliminaLstv

Ай бұрын

Are you talking about the t6000s thrustmaster software? That software is TARGET and it probably isnt installed on your PC. I. Isn't required.

@riccduttchh1808

Ай бұрын

Nooo I mean at the 2 minute mark I mentioned the configs listed on Ur site but the config for the ts16000m isn't there😅

That FLIPPIN Hidhide locked out ALL my usb ports. Hard to operate a computer with No mouse or Keyboard. Luckily able to restore with an install stick. What a convoluted Night mare.

Interesting....I stopped using pedals because of constant issues with my PC, this should solve that issue.

@SubliminaLstv

6 ай бұрын

Glad to hear!

You never need to resort with vJoy. The vJoy devices will never change order. :)

@JasonGranzow

6 ай бұрын

Came here in the comments to say the same thing, you beat me to it :)

@SubliminaLstv

6 ай бұрын

WAIT WHAT???

@JasonGranzow

6 ай бұрын

@@SubliminaLstv yup, the order gets messed up with physical sticks because of the order they are inistialize in USB, depending on if they are in a hub or ports have switched or sleep the initialization order can change and they need to be swapped. since the vjoy sticks are software they initialize in the exact same way every time so the order is always the same. Another added benefit is that since the vjoy sticks are always presented to star citizen if you unplug a physical stick and replug it you don't have to restart star citizen because as far as Star citizen is concerned the vjoy was always there. joystick gremlin just takes care of connecting it again behind the scenes.

@ChadSutton

6 ай бұрын

@@SubliminaLstv Yeah the virtual sticks never lose their order. You can plug and unplug all day long and all you have to do is enable in Joystick Gremlin again. Also if you use two virtual sticks, you can actually GAIN another two axes per stick by using the mini sticks with the mode key. I just add them as the slider and dial. I made the Default mode the parent so the other axes pass through to the mode shift. Then I just set the X Rotation to slider and Y Rotation to Dial. Then I assign all the buttons from 1-30 to the virtual stick from 31-60 (except for button 5 on the right hand stick, which is used for the mode button).

@ChadSutton

6 ай бұрын

Oh I forgot to mention that I also set the mini-sticks as hat 1 and then with the mode shift I set them to hat 2 so are all doubled as well. :)

Joystick Gremlin is not reliable for me :( I'm using the "Temporary Mode Switch" but it doesn't consistently switch back to the default mode after releasing the button.

i really cant figure out how to even open the hidhide program lol its just a bunch of files

Why Grimlin vs. Joy2key that Buzz uses Sub?

@SubliminaLstv

6 ай бұрын

All joy2key does is map joystick buttons to keyboard keys...like the name says, I know. But this can do that and much more. I'll explain how the process works to add the modifier I want in both programs. With Joy2Key it simply maps button 11 to whatever keyboard key you specify (ex. R-CRTL). When you press the modifier and button 1 it will show up in Star Citizen as "R-CTRL + Button 1". Joystick Gremlin maps the physical button on your joystick to a button on a virtual joystick, (you can add up to 128 physical buttons, across any number of physical devices, to one or more virtual joysticks). You tell JG what physical button is the modifier and you can map that button + what ever else you press to a virtual button of its own, (ex. virtual button 41). Star citizen will see this as just button 41. It doesn't even need to input a keyboard key. The main feature for me is being able to map physical buttons from joystick 1 2 3...and so on, to one virtual joystick. So as far as SC is concerned its just one device.

do you have one for vpc alpha prime?

@SubliminaLstv

6 ай бұрын

I don't, because I don't own them. If Virpil ever sends me some I will do it for sure.

@jadielrodeiguez2134

6 ай бұрын

@@SubliminaLstv ok thanks for the reply

This guide only works if things go exactly right. I am getting a bunch of errors from gremlin that make no sense to an average user after following along with the video when I try to add a remap.

mapping mini stick to additional buttons is not wowrking for me. i have folowed step by step instructions as well.

is there a way to just put mappings in folder without all this useless (for me) software? It was very simple just putting file into mappings folder and pp_resort all this. 5 seconds.

@SubliminaLstv

2 ай бұрын

Well yeah thats how binds work if you dont want the softwares features don't download.

Would love if Joystick Gremlin and vJoy worked on my system, but it just doesn't.

Gremlin just keeps telling me I cant use the profile because its an invalid version

I am more confused after watching this lol

All of this can be done with the joystick software already and resorting devices takes 2 seconds. What a load of BS.

@SubliminaLstv

6 ай бұрын

😂