Great video, I especially liked how you explained the tips and issues at the end. Very useful review

Thanks for the insight!

Thanks for the guide on how to install everything

@user-rs5dy2pr7l

2 ай бұрын

Thank you so much 👍

This case is nice but it really needs to have a mesh side panel option.

@projectsgaming2020

3 ай бұрын

I'll update u if they do decide to have a mesh panel

@neykovsn

3 ай бұрын

There is something pretty close, the ShinySnake G400, shame about availability.

@fugopychotka7560

Ай бұрын

​@@neykovsnIs shinysnake worth it, it costs only 300¥ on taobao

@Siang83

17 күн бұрын

Underrated comment

Please do the Jonsbo TK 3, that thing is damn beautiful

Going to by this case and modify it to fit a 280mm radiator it looks nice wish it wasnt out of stock everywhere lol

I wish i could get this case, but no local sellers and shipping is over $100, more than the case. lol

Excellent build guide and case review. A lot of the screws seem proprietary though in case you lose one so that's a bit worrisome.

@projectsgaming2020

3 ай бұрын

they included extras but its a real concern if u lose the extras

@jerbjerbjerb5912

Ай бұрын

​@@projectsgaming2020 can you possibly ask them to send you screws just in case you lose them?

@projectsgaming2020

Ай бұрын

@@jerbjerbjerb5912 depends on if the seller you purchase from has a good rapport with them but not sure if the cost+shipping would be worth doing

i like your channel bro !!

@projectsgaming2020

2 ай бұрын

thanks bro. its been a while. one of the early supporter of Projects Gaming

I want build a small custom warercooling only for the cpu . Can i fit a 280mm radiator on the top with slim fans and a small reservoir ? I will use sfx psu and no hdds, but a long graphic card xfx 7900xtx 343mm

Hi, is the tempered glass panel and the mesh panel interchangeable? I think that having the mesh on the other side will help with airflow and lower the temp by quite a bit. Thanks!

@projectsgaming2020

3 ай бұрын

not interchangeable as there's tabs on the mesh panel. Also I could be wrong but wouldn't there be heat build up on the back side of the CPU and MB now that is up against the glass?

Is there enough clearance at the bottom for 140mm fans without hitting the mobo's internal front panel I/O connectors?

@projectsgaming2020

2 ай бұрын

There's room but it's going to be extremely tight. Why not just run 120mm. I don't think 140mm will drastically perform better than 120mm.

i have seen this case and want to get it , but i have a question , it says u can use a 240 AIO or 2 140 fans , so i want to ask what if i mount the psu horizontally , can i be able to force in a 280 AIO (lian li galhad lcd 280 AIO)... pls help

@projectsgaming2020

3 ай бұрын

I don't have a 280 AIO to test this out, but just looking at the spacing with our 240 AIO, I don't think its doable

@blbhansel8226

3 ай бұрын

@@projectsgaming2020 okay and thanks , well if u happen to get a 280 AIO, kindly give it a try and update us , because just like u said , seeing the spacing on the AIO mounting bracket , i do think maybe the can be a way to fit a 280 AIO with the space at the top and lower the psu , well in all i guess i have to take the risk and buy the case and try it out , i like the handle alot that is 1 of my points for buying this , easy to carry and also can mount a top AIO , thanks for the reply and keep the good work ,

I saw that before you put the mainboard in, you had some screws (one black and one with an elongated tail), I don't know what use it is, and after I finished installing the case, there were quite a few left over. There are so many snails that I don't know if it has any effect I hope you will answer me

@projectsgaming2020

2 күн бұрын

those are use to secure the motherboard on to the case. It's not that big of an issue as long as your mother is secured and not wobbly about in the case

Does the handle cut into your hand when carried?

@projectsgaming2020

3 ай бұрын

if you carrying it for a long period than ya, if its a short trip than manageable. A circular handle would be more comfortable

nice case too bad its not available in my country :')

It look beautiful but not available in id 😢

does it fit 150mm wide atx psu ? it only specifies lenght but not width

@projectsgaming2020

3 ай бұрын

can fit 150mm (W) x 86mm (H) x 140mm (D) standard ATX psu if you are running a 240 AIO setup with standard atx psu you might need to run the hose towards the MB io side or push the PSU to a p3 or p4 slot but that will also be dependent on the length of your GPU

@lukabalta2398

3 ай бұрын

@@projectsgaming2020Awesome to hear ! thanks for reply i already got psu and ordered case but realised psu is 1000w chunky one. im going air cooler no issue there

Anyone know the height of the case with no carry handle but with the feet

@fidenciociprian6151

Ай бұрын

Have the exact question 😅

Does psu with dimensions 160mm(L) x 150mm(W) x 86mm(H) fit in this case?

@projectsgaming2020

2 күн бұрын

should fit but you are taking more room vertically which can affect your AIO and GPU selections. If you can swing it, better to just go for the SFX, give you more room

Compatible with MSI mag zero project or Asus BTF??

@projectsgaming2020

3 ай бұрын

nope

how the hell do you use to screw the bracket to the base of the case? What type? Thanks all

@projectsgaming2020

27 күн бұрын

are you referring to the GPU support bracket or the the SSD bracket?

Bro I want to know that if I use sfx psu at P4 level can I use 280mm or 360mm AIO on top ?

@projectsgaming2020

2 күн бұрын

280 is the biggest. I can't confirm this as we no longer have the case www.jonsbo.com/Upfiles/down/Z20%20Installation%20Manual.pdf

@city17workshop

Күн бұрын

@@projectsgaming2020 thank you :) Can you recommend me some good white itx or matx cases with top mount aio

@projectsgaming2020

Күн бұрын

@@city17workshop can consider Antec M-ATX Case RGB Elite CX200M but more for aircool for top mounted aio Jonsbo D301 MATX a little bigger but got room for 360 aio

@city17workshop

Күн бұрын

@@projectsgaming2020 thx sir

Needs full mesh

Is there anyway i can get this in the netherlands for under 80 euros?

@projectsgaming2020

Күн бұрын

unfortunately I don't have that info. Your best bet is contacting Jonsbo directly

Great Video, you guys have come so far! Good Content

Does anyone know when it will be available in EU ?

@projectsgaming2020

3 ай бұрын

They mentioned they were working with regional distributers on this. No timeline

Why they always put Glass on portable sff rigs.

@mkchow79

3 ай бұрын

They don't on the V11.

Can it fit 4080 super noctua?

@projectsgaming2020

3 ай бұрын

should fit. just need to aware of your PSU and bottom case fans

can a noctua 4080 super fit in that case?

@projectsgaming2020

16 күн бұрын

should be no issue. lengthwise the case can support up to 363mm. Just be mindful of your PSU size and placement. Also have a think about how it would affect your bottom case fans if you decide to run those

Good build bro 👍► i build my PC in same case, look my build 👀

man this case should be compared with terra.

Can I have one

I'm really tired of Tempered Glass panels. It's heavy and just make it hot inside.

저거 구매욕구가 안나오는 이유 : 푸쉬핀 부재