Jon Boat Buyer's Guide | What You Need to Know Before Buying a Jon Boat!

Спорт

Jon Boat Buyer's Guide | What You Need to Know Before Buying a Jon Boat!
In today's video, we're going over some of the most important things you need to know before buying a jon boat. We get a lot of questions from viewers about recommendations for their own builds. "What motor should I buy?" "Is a 12 foot jon boat big enough for me?" We love exchanging ideas with our viewers, but the answer to these questions depend on your specific fishing situation. To help with this, we compiled a list of some questions to ask yourself before buying a jon boat in order to make a more informed purchase:
What waters will you be fishing in?
How far do you plan to fish from your launching site?
How many people will be on your boat?
What kind of experience do you want for your jon boat?
What do you plan to use the jon boat for?
Each viewer will likely have a different answer to these 5 questions, and we think it will help you to narrow down your search for the ideal jon boat!
We highly recommend a jon boat for beginner boaters and anglers. As a relatively cheap entry-level boat, you can easily learn your essential boating skills without having to worry about damaging a more expensive boat. Your range is limited with the jon boat, so you can also stay close to shore to practice your navigation skills and learn your local landmarks. The small form factor also makes the jon boat easy to launch and clean, which means you can get out on the water much more often.
Will you be buying a jon boat in time for fishing season? Let us know in the comments below!
Our Jon Boat Setup
(Disclaimer: As an Amazon Associate, we earn from qualifying purchases):
Jon Boat: Tracker 1236 Wide Jon Boat
Engine: Mercury 6hp Outboard Motor
Removable Boat Seats: amzn.to/30JSs9Z
Removable Swivel (For the seats): amzn.to/39q4oS9
Rubber Floor Mats (Can't find the exact ones, but these have good reviews): amzn.to/3hSOwdS
Fishfinder: amzn.to/3jDHI5C
Plano Box (For fishfinder battery): amzn.to/30HkHpT
Marine Adhesive: amzn.to/3gaLL7D
Loctite Waterproof Sealant: amzn.to/3fYEc3I
Mighty Max Battery: amzn.to/3hKfVyX
Casting Deck: Custom (How we built it: • How to Build a REMOVAB... )
Jon Boat Adventures Playlist: • Jon Boat Adventures
Customizing our Jon Boat Playlist: • Customizing Our Jon Boat

Пікірлер: 81

  • @shakeswigglez3746
    @shakeswigglez37462 жыл бұрын

    I just purchased a 12 foot runabout with a pretty decent trailer, wheel lock, new tires for $700. I also happen to have a 55lb trolling motor. I honestly just want it to be able to take my nephews out fishing in our local lakes here in Colorado.

  • @cypsm
    @cypsm5 күн бұрын

    Hey this video was awesome! Thanks for being so detailed and explanative 🔥

  • @fernandorivera4989
    @fernandorivera49893 жыл бұрын

    I’m from Texas and looking at your guys vids really helped! I have a 1971 monark Jon boat. Thanks for the help need more vids like y’all👍🏽👊🏽

  • @stog9821
    @stog98212 жыл бұрын

    This was well done and very informative.

  • @frez777
    @frez7772 жыл бұрын

    great video, well done, informative!!

  • @nickchamberlain1996
    @nickchamberlain19962 жыл бұрын

    Very well informed video thanks

  • @juancpenado2
    @juancpenado28 ай бұрын

    thanks for a great video, I truly enjoy it.

  • @lucydisher7386
    @lucydisher7386 Жыл бұрын

    Thank you so much for this video.

  • @scottiswatchingtele
    @scottiswatchingtele10 ай бұрын

    Great video. Very well done.

  • @fruithauler
    @fruithauler Жыл бұрын

    Great video really enjoyed it

  • @staplesyo2391
    @staplesyo23912 жыл бұрын

    This video was great man really helped me out

  • @TheReelStrike

    @TheReelStrike

    2 жыл бұрын

    Glad we could help!

  • @beandipnchips4502
    @beandipnchips45022 жыл бұрын

    Nice boat. Great video good job.

  • @Buckuporbackoff
    @Buckuporbackoff2 жыл бұрын

    Great video!

  • @stanleybest8833
    @stanleybest883311 ай бұрын

    Air cooled 4 cycle is the new kid on the block. I bought a 52 CC outboard. Light, super reliable, quiet, and starts and idles perfectly.

  • @positivelyputnam7229
    @positivelyputnam72293 жыл бұрын

    I would love to see a video about your fishing gear, like your top 10-20 fishing products you use and how they help you and you use every time you go fishing.

  • @TheReelStrike

    @TheReelStrike

    3 жыл бұрын

    Good idea! We made a video similar to this idea a few months ago ( kzread.info/dash/bejne/noqCktOhaaieZJc.html ), but there's always new gear to review and recommend. We're also probably going to make a video where we share our favorite rod/reel setups and how we use them. Thanks for the suggestion!

  • @nolebucnaround8350
    @nolebucnaround8350 Жыл бұрын

    Love the conservative plug. I’ve got the 14 foot version of this and agree with you on all the points you’ve made. Great video Tight lines.

  • @OutpourOutdoors
    @OutpourOutdoors3 жыл бұрын

    I have a 12 foot Jon boat I’m about to be posting a vid of my mods in a couple days. I’m mainly a kayak guy but you guys inspired me to get a jon boat!! Haha 😂

  • @TheReelStrike

    @TheReelStrike

    3 жыл бұрын

    Congrats on your build! Glad we could give you some tips. Feel free to share some of your experiences with it in future comments, and looking forward to see some of the mods you installed!

  • @codyrivenburgh7645

    @codyrivenburgh7645

    Жыл бұрын

    I run a 12 for jon boat on lake champlain quite a bit and main lake gets wild in the wind or when there's alot of boat traffic..needless to say I recommend being smart and extremely safe in such a small rig

  • @teetimeaz
    @teetimeaz Жыл бұрын

    Instead of drilling and adding heavy wood or aluminum ($) I purchased large coolers for the front and several smaller ones to traverse the middle and sides. This is where i have my live wells, equipment storage and caught fish. Rod holders are also installed on the coolers. My combined total weight increased 75 lbs. If you want to stabilize your cooler, use spray foam and plastic sheets so the foam does not stick to your boat or coolers.

  • @allans7281
    @allans72812 жыл бұрын

    Very enjoyable video you guys are a natural at this. Good information and plenty to think about. I have a 14 1/2 foot old town canoe and I’m torn between a trolling motor in a 2 1/2 hp gas motor to hang over the side. I’ll be cruising up the coast medium distance in Lake Tahoe

  • @rslover65

    @rslover65

    2 жыл бұрын

    I've got a Suzuki 2.5 that I used on a 16' square stern. I'm not sure I'd want to hang that over the side without an outrigger. On the square stern, maxed out it got 8.5 mph with two people on board. I think if I had a standard canoe, the troller would be my choice. You could extend the cables and put your batteries up front to balance the boat.

  • @allans7281

    @allans7281

    2 жыл бұрын

    @@rslover65 Yeah Trolling motor works best- I don’t need to go that fast I just love slicing through the water silently. It’s the old town Saranac 146 at only 36 inches wide- should have minimal drag. Good advice for the battery but I bought a lithium it’s only 22 pounds. Thx mate

  • @dtq7388
    @dtq73883 жыл бұрын

    Thanks great video! Now finding a dealer that has or can get the model you want! Tracker is not offering anything smaller than 16 ft for 2022

  • @way75mit9
    @way75mit92 жыл бұрын

    Great Info Vid guy's , I'm planning on buying a J - Boat this coming spring , I was wondering what kind of floor mats you have in the boat & where did you find them ?

  • @emmanuelrivera7083
    @emmanuelrivera70833 жыл бұрын

    I have a 1436 tracker with a 2.5 merc and it works great for fishing the flats. Me and my bro are together around the 500lb mark. The 2.5 doesn’t go very fast but it gets the job done!!!

  • @TheReelStrike

    @TheReelStrike

    3 жыл бұрын

    Awesome! Glad the 2.5 works out for you. As long as it gets you where you need to go to get fish in the boat, you're solid!

  • @RS-ge4dz

    @RS-ge4dz

    2 жыл бұрын

    You need a 25hp stroke then you will have fun

  • @austinkennett8355
    @austinkennett83553 жыл бұрын

    Thanks for sharing your experience. I have a 1980 13’ Game Fisher I am working on for myself and my kids to be able to fish small ponds and lakes in our area. I am looking to use some of the mods that are on your setup. Great videos and information. Good luck on your fishing adventures.

  • @TheReelStrike

    @TheReelStrike

    3 жыл бұрын

    Glad we could help and give you ideas for your setup! Good luck with your build and feel free to let us know how it goes!

  • @HottMessFishin
    @HottMessFishin2 жыл бұрын

    Never seen the back seat set to the side like that... but I think I like it 🤔

  • @alonzoolivas2109
    @alonzoolivas2109 Жыл бұрын

    Great vid! Looking to get my first boat ever just looking for a good price. Academy is selling an aluminum 14x36 jon boat for about $2000 now when about a year ago they were going for about $1200 :/ and that’s boat alone not even trailer wish me luck

  • @senseielim2439
    @senseielim24392 жыл бұрын

    God bless from texas

  • @frankc2453
    @frankc24532 жыл бұрын

    where did you buy the black foot pad? thanks 👌

  • @jordanbrown1337
    @jordanbrown13372 жыл бұрын

    🔥

  • @christianmorriswilliams7072
    @christianmorriswilliams70722 жыл бұрын

    What guage aluminum is your jon boat. I hear .125 is the minimum gauge for aluminum in saltwater because of the potential to hit rocks and what not.

  • @FoodPornNetwork
    @FoodPornNetwork2 жыл бұрын

    How is the Mako holding up? Do you still like it?

  • @Hitech82
    @Hitech822 жыл бұрын

    I have a 1236 with a Sea PRO 10hp w/3 gallon tank. It's just about at the weight limit. Would adding beaver tail help me gain flotation?

  • @lazybagpipe
    @lazybagpipe17 күн бұрын

    How is it to get back into if you fall of and is there a ladder you recommend 😊

  • @drk4698
    @drk46982 жыл бұрын

    Where’s a good place to find a trailer, thanks

  • @classicxl
    @classicxl11 ай бұрын

    i wish i watched this video before buying my G3 1036 a few weeks ago. I think it’s too small for me and now i’m trying to sell it

  • @edwarddavis3963
    @edwarddavis39632 жыл бұрын

    Was that your lift being used to get the boat out of the water? If so can you tell me about it please.

  • @oscarrobles858
    @oscarrobles8582 жыл бұрын

    Can I hall a John boat14' footer on top of my Toyota 4 runner , and if I can or can't I can't hall a trailer it has to be on top what do you recommend? Thanks appreciate your expertise before making s mistake.

  • @andys4971
    @andys49713 жыл бұрын

    My fishing buddy and I are a bit heavier than you guys seem to be so I’m thinkin a 1436 will do us perfect. I have a evinrude 2hp from 1970s so I won’t be winning any races but I’m getting it to use in rivers and lakes and I’m just not in that much of a hurry lol

  • @TheReelStrike

    @TheReelStrike

    3 жыл бұрын

    Very nice! Glad to see you and other commenters strategizing and figuring out what setups suit their own needs. Good luck with your build and feel free to let us know how it ends up performing on the water!

  • @edoardoc0732
    @edoardoc07323 жыл бұрын

    Yo bro do you think you can go outcoast with this thing

  • @airgunningcolorado78
    @airgunningcolorado782 жыл бұрын

    Liked bc of the DeSantis picture!

  • @robertlambrecht6535
    @robertlambrecht65352 жыл бұрын

    So, I don't know anything about boats but I'm planning on getting an 18 foot jon boat for the purpose of mostly fishing in lakes and doing a little tubing. I weigh 275 (Yeah I'm fat 😆lol) and I was wondering how many people would be able to fit on it with me?

  • @TheReelStrike

    @TheReelStrike

    2 жыл бұрын

    Jon boats in the 16-18 foot range are pretty beefy and could probably fit an extra 3-4 people with you. Lowe has a 16 footer with a max person weight of 715lbs, and Tracker has a 17 footer with a max person weight of 800lbs. If the boat has a center console, it'll most likely be able to hold even more weight. You just have to make sure that the weight is distributed around the boat in a way that keeps it stable

  • @patrickczader3995
    @patrickczader39953 жыл бұрын

    I really need to know, where can I get boats? Is there an online store, do I look for boat shops in my area, like where can I look for boats?

  • @TheReelStrike

    @TheReelStrike

    3 жыл бұрын

    There's a lot of places to check. Usually your local marine stores are your best bet but some large retailers like Bass Pro Shops have boats out on display that you could look at. The website of your desired boat brand also usually has a section that directs you to the closest boat dealership in your area

  • @NASCAR_Junk
    @NASCAR_Junk Жыл бұрын

    Maybe one day…

  • @saltyrigfishing
    @saltyrigfishing2 жыл бұрын

    Where did u get the John boat for 800$

  • @3generationadventure
    @3generationadventure11 ай бұрын

    Wao thanks for the information, thats what I looking for , im I love with jon boats , i my case i wanted for cruse with my 30 yers son and my 2 grandsons 8-10 is like 3 adults mabe 4 , another thing nobody out the in u tube give all the information like you because besides de florida springs, i was thinking in inlets by example Sebastian Indian river is salt and fresh water but i have the doubts if I could do that with jon boat 🛶 . I know jon boat are for fishing but in our case we wanted for enjoy nature and family experience. 8 I was looking g3 15/42 With motor 20 hp did you think we are right for the 3-4 persons and bimini and cooler ? Please : I want to know your humble opinion 🙏 Thanks in advance

  • @user-tp5ic2oc4f
    @user-tp5ic2oc4f5 ай бұрын

    Donde puedo comprar este bote?

  • @inteljumperxx
    @inteljumperxx27 күн бұрын

    4000 for all that? That’s badass

  • @sportsandhobies
    @sportsandhobies2 жыл бұрын

    Where are you guys finding Jon boats for $800? (Reference 6:36)

  • @shookthehook
    @shookthehook Жыл бұрын

    No more videos guys??

  • @markhansen8078
    @markhansen80782 жыл бұрын

    used aluminum boat and trailer with a new or rebuilt engine would be a cost saving way to get a decent setup and not spend a ton of money

  • @swamprat9018
    @swamprat90182 жыл бұрын

    a 36" beam is for ponds and skinny people, a 48" beam is more a do all boat for normal size 2 men and occasional 3rd. I would not even consider a 36" beam jon boat for me after having a 48" beam jon.

  • @arthursilva9520
    @arthursilva95202 жыл бұрын

    Bro can I ask where you got that Jon boat for $800? I can’t find them anywhere

  • @RS-ge4dz

    @RS-ge4dz

    2 жыл бұрын

    They used to be that price. A 1436 riveted boat now since covid will be closer to 2000$

  • @RS-ge4dz

    @RS-ge4dz

    2 жыл бұрын

    Most big manufacturers quit making riveted boats and went to all welded boats but u can still find riveted boats but the cheapest one u will find is at academy for about 1699$

  • @renderuthis
    @renderuthis10 ай бұрын

    the video looks faster then 18 mph

  • @frankcesario4432
    @frankcesario4432Ай бұрын

    Not a lot of videos on overloading jon boats you can use shallow water and show video footage of how much weight you can pack in one before capsize

  • @docapathy6706
    @docapathy67063 жыл бұрын

    Idk why but the random picture of our governor made me laugh

  • @DavidAguilar772
    @DavidAguilar7723 жыл бұрын

    Do some new fishing videos!!!!!

  • @TheBabyDerp
    @TheBabyDerp Жыл бұрын

    $30 amazon waterproof bluetooth speaker... stereo problem solved 😂

  • @ReyBanYAHUAH
    @ReyBanYAHUAH2 жыл бұрын

    Always remember we must repent of our sins (sin is transgression The Law Of Yahuah The Father in Heaven. The Law are The Books: Genesis, Exodus, Leviticus, Numbers, & Deuteronomy). We must repent of our sins and Have Belief On Yahusha The Messiah. HE Died and Rose three days later so that we can be forgiven of our sins! Come to HIM🙂🙂🙂

  • @joshanderson924
    @joshanderson924 Жыл бұрын

    6:13 as a Canadian from the land of hyperinflation and failed socialist policies, hearing a price like that hurts my soul.

  • @texarkanaandi7393
    @texarkanaandi73933 жыл бұрын

    I wouldn't buy a Jon boat, since it cost as much as a loaded console boat: for example, a new bare-bone 16 ft Jon boat ($4,200) with a 30 hp outboard ($5,200) , trolling motor ($1,500), and trailer ($1,500), plus seats ($150/each) and fish-finder ($500) cost as much as a loaded console aluminum boat (e.g., Bass Tracker Classic XL, $14,000).

  • @josecruz-peraza5286

    @josecruz-peraza5286

    3 жыл бұрын

    When you are getting in that class of jon boat, especially the ones like the more expensive grizzly 1648, you are moving closer towards a traditional bass boat so yea it’s definitely better to buy a packaged boat in your case scenario. But generally a smaller jon boat set up in the 10-15ft range (which is what we are generally talking about) won’t cost nearly as much. For reference a 1542 jon boat would cost about as much as that trolling motor you mentioned.

  • @ninos431
    @ninos4312 жыл бұрын

    V haul boats much better than John boats and you can get them used as cheap as a brand new John boat!

  • @travelingwithrick
    @travelingwithrick3 жыл бұрын

    Great video ruined by a picture of the trump bootlicking liar Anyway, width of the boat is important fir stability. It also slows the boat down. I have a Lowe 1040 with a new Tohatsu 9.8 motor. Good set up. Top speed about 23mph. Your right its useful in saltwater. I go everywhere but 2 miles is the limit. Biggest danger is idiots in jet skiis, giant boat wakes that don't slow down. Googans in general. Good information video. Subbed.

  • @TheReelStrike

    @TheReelStrike

    3 жыл бұрын

    To each his own but thanks for watching despite our differences. Good point about the stability, the importance of the boat's width is something we don't often mention. And I agree, lots of undisciplined and uneducated boaters out there. We almost got flipped heading out on the channel once when an incoming 25+ foot boat refused to slow down (You can see that in this video). But overall it's a really fun experience using and maintaining our own custom jon boats!

  • @kalikasurf

    @kalikasurf

    2 жыл бұрын

    🤦🏻‍♂️

  • @jeffmoore759
    @jeffmoore7593 жыл бұрын

    Great video!

  • @jeffmoore759

    @jeffmoore759

    3 жыл бұрын

    How much do you weigh now? Do you think a fisherman can be too heavy for a Jon boat?

  • @TheReelStrike

    @TheReelStrike

    3 жыл бұрын

    We both weigh about 140-150lbs. I don't really think weight for an individual fisherman is a huge issue unless it's an extreme circumstance. The max load is almost 500lbs for this particular jon boat, so plenty of room to accommodate most people. I can maybe see weight distribution being an issue but that's a problem that can be fixed

Келесі