Thank you for this video. My father in law was helping trouble shoot my arrow flight problems yesterday. He noticed that the cock feathers were not at 90 degrees from the bow string. He told me to turn my nocks. I told him my arrow fletcher must be set up wrong. So I looked on KZread for a video and found yours. I use right wing helical feathers. Your video showed very well how to set the jig up properly. I had the front set to right wing, but the back was on left wing. I didn't even realize that the front, the nock end, was adjustable. So I switched the location to right wing. I have used my jig incorrectly for years. Thank you so much.
@tecate94083 жыл бұрын
Finally found mine, I bought it years ago and it got buried in the shed. Thanks for posting this refresher for us!
@alexjabari234
3 жыл бұрын
you prolly dont give a shit but if you are bored like me atm you can stream pretty much all the new series on InstaFlixxer. Been streaming with my brother during the lockdown :)
@kolejustin9765
3 жыл бұрын
@Alex Jabari Yea, been using instaflixxer for since december myself :D
@randallsam9774
3 жыл бұрын
@Alex Jabari Yea, I've been watching on instaflixxer for years myself :)
@user-uo2tu3mh3o26 күн бұрын
I just found mine havent used it in almost 20 years,I put just a tiny bit of vasaline on my finger and I mean tiny and coat the inside of the clamp it helps to keep the clamp from sticking on removal and I always clean my clamps when finished.
@tsohgrepins45457 жыл бұрын
You answered all my questions. Thanks and great video
@papagrouch84166 жыл бұрын
Good video. Answered lots of questions and had some good tips.
@whiteturkeyhunter6 жыл бұрын
finally a good video on these
@rich70367 жыл бұрын
Hey, I used the gorilla super glue gel and it seemed to work pretty well to get into the imperfections on the quill. Only problem is when you have to remove the feathers with out wraps.
@michaelbutler9435
7 жыл бұрын
Tradbow yea, it also drys way too fast for me.
@deanf70862 жыл бұрын
Thanks you for video! Very helpful because the instructions are lacking right!
@kevincurtis35773 жыл бұрын
How about an explanation of the various dials that plug in the bottom, i have multiple sets
@orlandoagostinho66152 жыл бұрын
Do you know where you can buy the clips for it. A friend gave me the jig with no clips.
@majestrate986 жыл бұрын
Four fletch is not 90 degrees on the JoJan. It’s closer to 60/120 degrees. This gives you better clearance from your arrow rest.
@rexfrost5246
6 жыл бұрын
They have two nocks one is 90 degree FS61 the other is 75° - 105° - 75° - 105° FS51
@ReichenbachEsq4 жыл бұрын
Do we need to have a nock on the end of the shaft before we use the clamp?
@michaelbutler9435
4 жыл бұрын
Yes, the nock sits in the nock receiver. There is a notch in there.
@danvrana2776 жыл бұрын
It would be great if you could see what your talking about? Lol
@rexfrost52466 жыл бұрын
Feathers on a carbon shaft???
@ReichenbachEsq
5 жыл бұрын
Rex Frost All my carbon arrows are fletched with feather...it’s a wonderful set-up...my recurve & longbows love them.
@michaelbutler9435
5 жыл бұрын
Of course
@AnthonyBencomo6 жыл бұрын
Where can you buy this?
@michaelbutler9435
6 жыл бұрын
Anthony Bencomo google Jo-Jan fletching jig
@AnthonyBencomo
6 жыл бұрын
I did - thanks. It's like it's no longer carried.. I found a unreputable shop that carries it - and they only provide left helical clamps with the jig. I don't want to buy from them or use left helical. Great video by the way - very informative.
@AnthonyBencomo
6 жыл бұрын
They went out of business dude. Lancaster confirmed. Enjoy your jig.. I was wondering how the company was able to sell such a large jig for so little. They under priced their jig.
@michaelbutler9435
6 жыл бұрын
Anthony Bencomo that sucks, I just bought 2 new right wing clamps last year for it. Keep an eye out on eBay.
@AnthonyBencomo
6 жыл бұрын
Sounds good!
@obelixvalissa110 ай бұрын
Schlechte Bildaufnahme
@colteck81995 жыл бұрын
Way too much talking not enough showing.
@michaelbutler9435
5 жыл бұрын
Sorry, tried to explain how these things work to get started for people who did not know.
Пікірлер: 32
Thank you for this video. My father in law was helping trouble shoot my arrow flight problems yesterday. He noticed that the cock feathers were not at 90 degrees from the bow string. He told me to turn my nocks. I told him my arrow fletcher must be set up wrong. So I looked on KZread for a video and found yours. I use right wing helical feathers. Your video showed very well how to set the jig up properly. I had the front set to right wing, but the back was on left wing. I didn't even realize that the front, the nock end, was adjustable. So I switched the location to right wing. I have used my jig incorrectly for years. Thank you so much.
Finally found mine, I bought it years ago and it got buried in the shed. Thanks for posting this refresher for us!
@alexjabari234
3 жыл бұрын
you prolly dont give a shit but if you are bored like me atm you can stream pretty much all the new series on InstaFlixxer. Been streaming with my brother during the lockdown :)
@kolejustin9765
3 жыл бұрын
@Alex Jabari Yea, been using instaflixxer for since december myself :D
@randallsam9774
3 жыл бұрын
@Alex Jabari Yea, I've been watching on instaflixxer for years myself :)
I just found mine havent used it in almost 20 years,I put just a tiny bit of vasaline on my finger and I mean tiny and coat the inside of the clamp it helps to keep the clamp from sticking on removal and I always clean my clamps when finished.
You answered all my questions. Thanks and great video
Good video. Answered lots of questions and had some good tips.
finally a good video on these
Hey, I used the gorilla super glue gel and it seemed to work pretty well to get into the imperfections on the quill. Only problem is when you have to remove the feathers with out wraps.
@michaelbutler9435
7 жыл бұрын
Tradbow yea, it also drys way too fast for me.
Thanks you for video! Very helpful because the instructions are lacking right!
How about an explanation of the various dials that plug in the bottom, i have multiple sets
Do you know where you can buy the clips for it. A friend gave me the jig with no clips.
Four fletch is not 90 degrees on the JoJan. It’s closer to 60/120 degrees. This gives you better clearance from your arrow rest.
@rexfrost5246
6 жыл бұрын
They have two nocks one is 90 degree FS61 the other is 75° - 105° - 75° - 105° FS51
Do we need to have a nock on the end of the shaft before we use the clamp?
@michaelbutler9435
4 жыл бұрын
Yes, the nock sits in the nock receiver. There is a notch in there.
It would be great if you could see what your talking about? Lol
Feathers on a carbon shaft???
@ReichenbachEsq
5 жыл бұрын
Rex Frost All my carbon arrows are fletched with feather...it’s a wonderful set-up...my recurve & longbows love them.
@michaelbutler9435
5 жыл бұрын
Of course
Where can you buy this?
@michaelbutler9435
6 жыл бұрын
Anthony Bencomo google Jo-Jan fletching jig
@AnthonyBencomo
6 жыл бұрын
I did - thanks. It's like it's no longer carried.. I found a unreputable shop that carries it - and they only provide left helical clamps with the jig. I don't want to buy from them or use left helical. Great video by the way - very informative.
@AnthonyBencomo
6 жыл бұрын
They went out of business dude. Lancaster confirmed. Enjoy your jig.. I was wondering how the company was able to sell such a large jig for so little. They under priced their jig.
@michaelbutler9435
6 жыл бұрын
Anthony Bencomo that sucks, I just bought 2 new right wing clamps last year for it. Keep an eye out on eBay.
@AnthonyBencomo
6 жыл бұрын
Sounds good!
Schlechte Bildaufnahme
Way too much talking not enough showing.
@michaelbutler9435
5 жыл бұрын
Sorry, tried to explain how these things work to get started for people who did not know.