Make sure you check out my merch store for some ZK swag! zk-mastertech.myspreadshop.com/

I did a lot of training in a completely different field and passed on info that you could not have learned any other way. I would run into some of these people over the years and would be rewarded with them telling me how much more competent they had become because of what I had shown them. Josh is a lucky man.

Thanks again Zeth for the video. Where were you 40 years ago when I breaking my back on the tools, as I loved the adapted jack/lift you made for the vertical gearbox/auger. I really love techs that have your mindset to overcome these issues and make the job not only easier but safer. We also need more of your dog 🙂

Always be nice to the next guy to work on something, because sooner rather than later you _are_ the next guy.

We did the vertical and unloading augers a couple years ago on our 9670 STS. The Sloans guys from White Hall helped us with the vertical, they had a nice adapter we put on our cherry picker to help going back up and in. Not an easy job. We also later on ended up having to replace the turret pivot pieces and that isn't fun either. Definitely not looking forward to the day our S680 needs those done. Hats off to you boys for battling those machines day after day.

@jamesjarosek1723

2 жыл бұрын

Would also replace bearings on lower gear case.

Video length said 18:17 time flies when you're having fun 😊! Seamed like 5 minutes. Happy subscriber 👍

So interesting to see the real "Guts" of the combine and understand what happens when you command the Unload auger. What enormous Parts ! .

Thanks for sharing, super good video👍

Awesome video thanks for sharing that is one HUGE combine wow !!!

Another great video Zeth! Keep up the good work!

Awesome video zeth it's always good to watch your videos

Combines are always a joy to work on ! lol

Nice to see you at home with the pup!

Thanks for all your wonderful advice. Your videos are the best 👍👍👍

Really enjoy your videos

Appreciate the info about the augers, Zeth. Thanks for another episode.

Another good one Zeth!

Zeth another very informative video thanks for sharing your knowledge 🦘👍

Great videos. Great refresher course, got mine torn apart right now

Thanks for sharing buddy

Awesome vid!

Immer wieder tolle Videos 🍀🇨🇭

Another excellent video. You have a really nice looking dog. Love the channel

Thanks for another great video ZK. It was interesting and enjoyable and extremely informative. Wow. Lots of work getting all of the different sections apart. Heavy lifting parts for sure. Thanks for showing us how to time all of those pieces when going back together. Important info to know so everything works correctly. It is all of these setup items you need to know when putting it back together or you are in for trouble. Your teaching videos are so so so valuable to say the least. Saves you from a lot of time. Many thanks ZK. You and Josh do great together. Combines are not easy work. Feel like I saw and learned a lot off this video today. Just a little smarter-ha!!!!!! About it I guess. Brazing hot here in Iowa. Today is 98. Too much. You both take care and be safe. Looking forward to the next video. Thanks for everything ZK. The Iowa farm boy. Steve.

Thks very good vidoeo

Love your videos. How about some more cameo appearances from Toby?

I think intro separately is fine 🙂 👌

Great video guy's and good work !👍 A vertical auger is never a good idea for moving any kind of product . Them Gleaner combines look better all the time .😉

Wow, tons of dirt in the bottom of the auger at 15:00 even after cleaning and running grain through it.

Good warning video for farmers being casual with dirty corn. Better to leave some perhaps?

Was it a Contractor Machine? Enjoyable Video..Very informative..Cj UK

I am so jealous I wish I got paid to film someone working lol. Another great video tho !!

Take Toby to see Anna or Ditch at the Millennial farmer place.

Did that unit come with the high wear pkg?

Great need hat t shirt

Thanks for great videos! The paint on the augers get worn off and coming out with/in the grain, couldn’t Deere just keep these as stainless steel?

Does JD have a refurbishment program for the augers? As long as the shaft and splines are good re-flighting them is a straight forward affair especially considering JD has the flighting.

@ZKMasterTech

2 жыл бұрын

No there's not

🤙🤙

😁👌

Im currently replacing the horizontal augers in a 9660sts 21.5'. Whats the best way to time the two horizontal augers? You stopped the video at the most important part for me 😂😂

Never seen an S790 without ACI concaves! Weird.

Wow that s680 is hurting badly.i have replaced the feeder chain before on the farm and it is not fun.

What kinda dog is Toby he looks just like mine and mine is Pit Bull and Labrador retriever

@ZKMasterTech

Жыл бұрын

He’s an English yellow lab.

Factory: bigger holes, please.

whats his @

Alle 500 Stunden das Ding Austauschen lassen. Na, die Maschine hätte ich als Kunde aber umgehend zurück gegeben. Ist ja nicht zumutbar.

@2xKTfc

2 жыл бұрын

Wenn der Kunde auch die ganze Saison Dreck durchfüttert... Er sagt ja, dass normalerweise 1000 Stunden schon extrem wenig sind und die meisten weit mehr halten.

@schmatzek1

2 жыл бұрын

@@2xKTfc na wenn du dir mal anguckst was da tag ein tag aus für neuwertige Maschinen mit wenig Stunden schon für üble Defekte haben dann weisste auch warum JD in Deutschland so wenig Bedeutung hat. Wenn ich schon seh das ohne Grundierung lackiert wird könnt ich 🤮.

@2xKTfc

2 жыл бұрын

@@schmatzek1 Solche Defekte findest du bei allen Herstellern die in vergleichbaren Stückzahlen verkaufen. Das ist als würde man BMW fahren weil ein Merc immer in der Werkstatt steht, kann man machen aber letztendlich das gleiche in Grün.

@schmatzek1

2 жыл бұрын

@@2xKTfc nicht in der Masse. Ich bin in der Branche.