John Deere D120 Blades will not engage , Blade Brake problem , GY21943
Автокөліктер мен көлік құралдары
John Deere D120 Blades will not engage . This John Deere D120 would not engage the mower blades , because the blade brake was worn out and let the brake travel past the pulley and get wedged into the pulley . the brake pads were john deere GY21943. There may be a better way to install the blade brake . John deere mower blades not engaging . The engagement cable seems to work good on thid D120 john deere. Many John deere 100 series lawn tractors may have this issue. Lawn tractor repair . wtbm123
Пікірлер: 51
Great repair Terry, nothing like a mower failure when you need to mow.
Thank you so much for this video, Sir! My John Deere D105 had the same exact issue and I have been trying to figure it out why. I saw this and checked my brake thing and same. I ordered a new set and it arrived today, installed it and it's working 🫡
@wtbm123
Ай бұрын
Glad it helped
Helpful in understanding how that all works. It helped me to diagnose what was going on with mine. I avoided having to get a trailer and tow to a repair shop that has a 14 lead time, because of this video. Thanks!
@wtbm123
Жыл бұрын
Glad it helped!
Saved me hauling the mower to the shop! Very helpful instructions and easy to follow along to fix. My issue was the bushing was missing on the brake arm - that is an important part! Without the bushing the brake arm cant move :) THanks again for your helpful video!
@wtbm123
11 ай бұрын
Glad you commented telling what the issue with your was . It could help others some day . Thanks.
You are a saint. Thanks for such a great vid, I'll be taking mine apart today and now I've got a great starting point.
@wtbm123
3 ай бұрын
Hope you get it all sorted out
Great brake replacement job there young man👍😎
@wtbm123
Жыл бұрын
Thank you
That was very helpful. Thanks.
@wtbm123
Ай бұрын
Glad it was helpful!
After messing around with the same problem for the last 3 days, your video showed up on recommended to watch. I watched it and now I think I'll get it running today. Thank you so very much for creating this video! I'll let you know if we got it running! God bless you!
@wtbm123
Жыл бұрын
Thanks for watching and commenting . If have real problem getting the little spring back , some people takes the pulley off and do it that way also.
@johnbrennan9778
Жыл бұрын
@@wtbm123 Report from son, who was going to finish it up last night was that the blade pulley under the left foot when you're sitting on the tractor was bound up with stuff on the underside caked on from last fall (I know, I should have flipped it over!). He also had to mess around with the spring which engaged the brakes. Lastly, he had to loosen the bolt holding the tensioning pulley that the PTO spring is attached to and lubricate under that. He ran out of sunlight and was going to slip the deck under the tractor and see if the blades spun today. So far no word, so he might be out cutting his lawn. It was his mower and he liked your video as well! Thanks!
Well done terry, a bit of a pain to do but worth the time 😀 Pity that J.D didn't add two pins to the deck to stop the brake arms going too far, the pad would of worn out but no metal to metal damage. Ooow of cause ha ha, J.D would not get the money from after sales replacement parts!.
Saved me money, and time, so helpful.
@wtbm123
Жыл бұрын
Glad it helped , Thank you for taking the time to comment
Good video- I got a strip of break pad and cut to size and apply with epoxy
@wtbm123
Жыл бұрын
Cool
Very nice job on the brakes .
@wtbm123
Жыл бұрын
Thanks 👍
Awesome Video.
@wtbm123
9 ай бұрын
Thank you
Well done 👍👍
@wtbm123
Жыл бұрын
Thank you 👍
Man... I have been messing with my mower deck for months before I saw this video about adjusting the nuts on the back of the rods. I hate to admit it but my wife mentioned it as well.
@wtbm123
Жыл бұрын
Always listen to the Wife , lol
Nice fix.
@wtbm123
Жыл бұрын
Thank you .
Good video, but I don't know what you loosened and then tightened under the right pully which seemed to be attached to the pully break pad. You used an extension on your socket to get at the nut or bolt. I kept thinking that it would have been helpful if you had taken off the pully to show what it was you loosened and then tightened. Good commentary and otherwise easy to follow. Thanks!
@wtbm123
Жыл бұрын
The nut on the small rod .
@pakoroutube
5 ай бұрын
Great video. Easier to take the pulley off to work on the nut on the small rod.@@wtbm123
I would look into the round file. That's where I would find these parts
@wtbm123
Ай бұрын
Thanks
Great repair Terry ! Hows Sam doing ?? Keep the camera rolling, ENJOYED
@wtbm123
Жыл бұрын
Sam passed away on the 16th.
@shawnmrfixitlee6478
Жыл бұрын
@@wtbm123 oh no... I am so sorry terry, i feel your pain and loss .. i miss my Elmo . after so many years of love and good times he just is and always will be part of me..
i'm having the opposite problem... YES, there are supposed to be pads on it.. my blade brakes appear to engage, but the blades keep spinning... visually looks in order, works mechanically by hand when deck is removed
@wtbm123
Жыл бұрын
is all adjusted well and cable adjusted correct
@vjmacintyre
Жыл бұрын
@@wtbm123 yeah.. it seemed to work fine then it didn't by the next time i used the mower
My deck brake won’t let off of 1 pulley.
@wtbm123
10 ай бұрын
It may of traveled to far like this one . If not then one of the pivot points might be frozen up.
My mother-in-law bought one of these and I'm always working on it. This mower is junk.
@wtbm123
11 ай бұрын
They all have issues . Hard to find a good one any more
It's scary how cheaply made these lower models are 😐 John deere shouldn't even make junk like this
@wtbm123
Жыл бұрын
Agree but they are all that way anymore no matter what brand
@cb7pwn
Жыл бұрын
@@wtbm123 ahh.. not if you spend over 5k lol
Very good video help mi a lot
@wtbm123
11 ай бұрын
Glad it helped