Had my 3025d for several years. And it has done many little jobs over the years. I have alll the tires filled with fluid and wheel weights all the way around. Last time checked drive on scale, it read 8,941 lbs. So no little car haul trailer is going to carry it so easy. But with weight this little tractor can easily carry a round bale. It can also pull a small 3 bottom plow. Breaking ground a 2 bottom is doable.

We're about to pull the trigger on a brand new 3025e (2022). Videos like this help me with being confident in dropping that much for a tractor. Thank you!

A great value. I put a suspension seat on my 3025e . I great ride and she puts beautifully.

I just bought one today 😊

@rsmstuff3178

20 күн бұрын

@@c3homeimprovementllc927 I hope you enjoy it, I still like mine. Only if I was home more to use it. I’m hoping to be home in a few weeks to create some more videos.

Good job ! No doubt that the JD 3025 is capable ! 🙃😉

Great video. Very instructive

The 3e or 3d series are pretty capable tractors.... with a 5x6 bale you can shuffle them around but depending on density you may not lift them to full hight, but you can still shuffle them around. Also one thing is if your mom looks at a 3e series for hydrostatic drive not gear drive, the 3e has 1356 pounds of lift 24 inches behind the lift arms while the 3d is more capable with just over 1600 pounds of lift. Great video

@rsmstuff3178

3 жыл бұрын

Thanks for the info. She is looking at something between a 4 and 5 series. I just seen that video of the 1 series moving them and I had to try it with mine. I thought this video would show off what this thing can do. Also thanks for your continued support of my channel.

@countrydad833

3 жыл бұрын

A speer makes a lot of weight difference on the front

I was picking 5x5s with my 2038R today

Looks like a winner to me , I'd like to see that unit hooked to a square baler just for shits and giggles, I'd say as long as you ran in a lower gear it would run a baler just fine

@rsmstuff3178

3 жыл бұрын

If I had one available I would try it. I may see if I can find one to barrow.

Looks like it's doing a good job to me.

That thing is impressive. I just subscribed

@rsmstuff3178

11 ай бұрын

Thank you. I am still impressed with what I can get done with this little guy.

That was impressive, my 3025 E wouldn't do that. I can't even pick up a bucket load of gravel with my tractor. Mine struggles with a half bucket load. I've always had hydraulic problems and don't seem to get any support from the dealership. They keep telling me I've got restrictions in the hose connectors.

@rsmstuff3178

3 жыл бұрын

That stinks, maybe you could show them this and ask why mine can and yours can’t. Maybe they can explain it. Is your a 300e loader? It is weird you have restrictions in the hose connectors, unless something has been changed. Just me thinking.

@edwardelliott8831

2 жыл бұрын

I have a 3025e it is 2017 year it will pick up a bucket full of stone a bucket of dirt no problem

Good stuff I wondered this with my 35D but I don’t have the attachment to see. Really need pallot forks more than hay spear. Good video sir. Btw do you edit your videos I added a couple showing how to take the grill off and change the mesh grill but I can’t edit for nothing. Have a good one.

@rsmstuff3178

3 жыл бұрын

I do edit my own videos.

@oklahomachris6298

3 жыл бұрын

@@rsmstuff3178 what do you use? Do you use a go pro and computer or phone to video and edit?

@rsmstuff3178

3 жыл бұрын

@@oklahomachris6298 I started with a iPhone 8+ and done everything on my phone, I would even work on editing at work on my lunch breaks. I have upgraded to a GoPro hero 9 and a computer. The reason for upgrading was to have better mounting brackets and video stability. I can take the videos from the GoPro and edit them on my phone. I just think it is easier on a computer. The computer is a 10 year old MAC that my wife had for school. Hopefully this helps.

@oklahomachris6298

3 жыл бұрын

@@rsmstuff3178 yeah it helps one other thing. What software do you use to edit with. I looked for some free video editing apps but not sure that is an option, and they’re not that easy to use or figure out. I’m not techy like that tho either

I am wondering what the lift capacity would be without the bale on the back. I am buying a 3032E that has beet juice in the rear tires, which, of course will help.

@rsmstuff3178

9 ай бұрын

I have beet juice in my rear tires. The lift capacity will not change with the ballast. The loader will only lift what it can. The bale on the back is to increase stability,and give more traction on the rear tires. The front axle kind of being a pivot point. The more you have on the rear the better and if you had wheel weights that would help more.

What is the weight of the bales

@rsmstuff3178

2 жыл бұрын

I really do not have an exact weight on these bales. I wish I did. I will ask the farmer that bailed them and get back to you when I find out.

stab it into the hey ball not under the hey ball

@bearkawiboy6246

8 ай бұрын

Learn how spell and learn how to spell.!

Mine won’t lift sh*t I love the 3025d otherwise

@rsmstuff3178

10 ай бұрын

Well that stinks.

@Cat3406e

9 ай бұрын

@@rsmstuff3178 I do like the rest of the tractor a lot it’s an animal with ice pick chains and a winch

@rsmstuff3178

9 ай бұрын

@@Cat3406e I wonder what the pressure is at the hydraulic pump. I guess I need to do a video on that. If the pump pressure is not correct then you won’t be able to lift anything. When I get home this weekend I will see what it takes to get the tools to check it.