Jeep XJ Rear Main Seal Replacement
This is the best video for replacing your rear main seal and oil pan gasket. I took extra care with lighting and camera placement. It might even entertain you to some degree. Maybe single digit degree but it's something! If you're about to do this job I recomend you give it a watch, but use my advice at your own risk because I'm an idiot.
Felpro Rear Main Gasket
a.co/d/0JzsvWf
Felpro Oil Pan Gasket
a.co/d/ghqHxt6
Permatex Black RTV
a.co/d/aY9RCpU
Oil Pan Bolts
a.co/d/cnsRI4D
Disclaimer: The information provided in this KZread channel is intended for educational and entertainment purposes only. The techniques, modifications, and suggestions demonstrated are based on personal experiences and should be performed by individuals with appropriate skills and knowledge. It is essential to prioritize safety, follow manufacturer guidelines, and comply with local laws when modifying or operating any vehicle. The creator of this channel shall not be held liable for any accidents, injuries, or damages resulting from the use or misuse of the content provided. Viewer discretion and responsibility are advised.
Пікірлер: 12
Good job! You motivated me to get mine done!
@4HIGHGARAGE
9 күн бұрын
@@kjohns236 Fantastic!
Great walkthrough. I will be doing my rms soon and this will helpful.
@4HIGHGARAGE
Ай бұрын
Thanks!
Good video, I did the RMS in my Comanche when I had the trans out and it was much easier, but still a tough time. I ended up having to take the next 2-3 bearing caps ahead loose to get enough space to get my new block side seal in without damage. Very carefully re-torqued everything and have been leak free the last 2 years! I don't drive it much, but it was much needed. While you're down there, might as well do the oil filter adapter gaskets as well, since that's another leak-prone area of these motors.
@4HIGHGARAGE
2 ай бұрын
I forgot in some cases you have to loosen up a couple more bearing caps. Damn wish I had mentioned it. Thanks for posting it here though!
Great video bud. What year is yours because when I clicked the link for the the RMS. Shows it doesn’t fit mine. Did they change the RMS for a 00/01?
@4HIGHGARAGE
22 сағат бұрын
Yes the seal is different. Mine is a 1997. The install will be about the same though.
Why didnt you replace the oil pump or even put in a stroker crank while you were in there?😁😁
@4HIGHGARAGE
2 ай бұрын
I’m super leery of the Chinese oil pump garbage out there. So if it ain’t broke don’t fix it kinda thing. And man oh man would I love to put a stroker motor in this Cherokee!!
Do you think this job could be done with just hand tools?
@4HIGHGARAGE
Ай бұрын
Absolutely! You’ll just need to source a torque wrench. But the rest can totally be done with hand tools.