Needing new fenders?I want to use these but retain oem fenders

This video is already obsolete, the design was changed a little and this video isn't that helpful. First off once you remove factory flared don't listen to him about putting new flare on then liners or you will be taking them back off. Second thing they don't tell you is that the lower mounting holes in the frame to the front of the wheel need to be tapped with a M8×1.25 tap. Take the wheel off and make life easy. There is only 1 mount on top now also front of wheel center and then the 2 down low at the rear. I'm thinking about getting nut zerts to install on top mount and the 2 rear lower because no dealer is going to want to remove for any kind of service so we will want to pull the liners every time we have to take it in and using there hardware means removing flares also. I had to do a lot of butchering to modify my new quadratec baja high top flares front and rears but I guess that's to be expected.

@bud1lite

2 жыл бұрын

Yep you are right!,