Jeep Wrangler JK JKS Suspension Lift Kit 3-1/2" JSPEC With FOX Shocks 4-Door 2007-2018 Installation
Автокөліктер мен көлік құралдары
Matt shows you how to install this JKS Manufacturing JSPEC 3-1/2" Suspension Lift Kit with FOX Shocks on your 2007-2018 4-Door Jeep JK Wrangler.
Product Link:
www.cjponyparts.com/jks-manuf...
Lifts are one of the most sought after mods for Jeep owners, especially when off roading. So, when it's time to lift your own rig, do it right with this premium JKS Manufacturing lift kit that's complete with Fox shocks.
Showcasing a fully inclusive package that delivers absolute excellence and everything you'll need for a professional lift, this kit includes:
- 3-1/2" front and rear dual rate coil springs
- FOX 2.0 Adventure Series shock absorbers
- JKS front adjustable track bar
- JKS front sway bar quicker disconnects
- Front and rear brake line extensions
- Rear track bar bracket
- Front and rear bump stop extensions
Installation will take you around six to eight hours, and CJ's does recommend you get an alignment after the installation to ensure that your Jeep drives straight.
Check out more Wrangler Lift parts from CJ's here:
www.cjponyparts.com/wrangler-...
Check out more JKS Manufacturing parts from CJ's here:
www.cjponyparts.com/jks-manuf...
Subscribe to CJ Off-Road on KZread here:
/ @cjbroncof150
Пікірлер: 22
Finally someone using a torque wrench! Loctite and torque wrenches…. A rare sight for KZread mechanics
great video. Will be installing this kit on Tuesday!
Great video ! I did this upgrade on a 2008 JKU from the rust belt and had to replace some bolts that were rusted beyond use. Also a lot more challenging using jack stands in the garage. I will have to take to a shop that does welding as I don’t have the experience doing that. Not necessary for the track bars but will do it anyway for piece of mind.
I was eating a snack and spit my food when he said to drill a new hole for sway bar links. Why not just provide new links the in the kit?!?
Nice great video. I got mine on thanks to you. Awsome.
Was the JKS exaust extension kit not required for this install?
Did you have to add exhaust spacers?
How many lift kits have you installed? Seems like you can do these blindfolded! good video.
I have a 2014 Rubicon JKU that has an electronic sway bar release. Will this be compatible? Is anything additional needed?
@CJBroncoF150
6 жыл бұрын
This will work fine with your Rubicon, you just won't have to worry about removing your sway bar links.
If this is a 3.5" lift kit, shouldn't you install the rear bump stop for a 3.5" kit not the 2.5" kit. Or am I wrong?, installing this kit soon.
@CJBroncoF150
3 жыл бұрын
i would install the 3.5 bump stop
Is it really an option to not weld on the rear track bar reinforcement bracket? Did you just not install it for the video?
@CJBroncoF150
5 жыл бұрын
It is not required for you to weld on the rear track bar mount, the hardware included will do the job!
What size wheel and tire is on that set up?
@CJBroncoF150
5 жыл бұрын
They are fuel trophy wheels, with 33 inch fuel gripper at tires!
What's the cost for this kit?
@CJBroncoF150
6 жыл бұрын
This kit runs just under 2,000. Here is the link: www.cjponyparts.com/jks-manufacturing-suspension-lift-kit-jspec-j-konnect-3-1-2-inch-with-fox-shocks-4-door-jeep-wrangler-jk-2007-2018/p/EC113K/
uh tire size?
@CJBroncoF150
4 жыл бұрын
285/70 r17
Okay wait a minute he doesn't have three arms does he
don't worry about the price worry about service after you've spent $1300.00 on their product. NO SERVICE, ZERO. NADA. ZILCH