JEEP WRANGLER $30 DIY INTAKE MOD
Автокөліктер мен көлік құралдары
Threw this video together real quick because I figured it would help anyone trying to save some money. Doing this gets rid of the factory baffles and smooths out the intake track. Between recording this and uploading it I've driven about 75 miles city and highway and have gotten almost 2 mpg better on average but we all know the most important part of this is that it sounds cool.
Пікірлер: 62
Did this back in '17 on my JKU blog. Adds a growl, possible increase in noise with a K&N drop in, and retains factory intake and water ingestion safeguards. Removes the narrowing seen on the factory crossover, probably only matters at wide open throttle.
Chrysler/Jeep DOES NOT put anything on a vehicle unless it has some sort of intended engineering purpose and needs to be there (in their minds/research). In the case of those dangly bits,( Buffel Tubes/Chambers on the intake pipe), those are Helmholtz Tubes that reduce/ cancel out resonance/noise in the intake. In Chrysler/Jeeps opinion/research, grandmothers, little ole men and ladies, business people etc. that buy jeeps, don't like the intake growl that WE the people LOVE.. So, those chambers are added to cancel out that intake noise. Maybe the EPA had some noise reduction say in the matter. SAD! Who Knows?. YES, removing those chambers, will add back the intake sound that we like, remove a little intake restriction/turbulence and make the engine compartment look a little cleaner. Great job! IMHO, I cant say for sure that the chambers reduce intake air flow but, removal cant hurt for several positive reasons!
awesome video !
This would look great on my ‘08 JKU. The increased airflow will be nice.
Almost finished mine, already painted and ready to go.... Just waiting for the 90° elbow to come in and that's it. Nice mod!
@funnyflix2
4 жыл бұрын
What size grommet did you use?
@roboutdoors_21
4 жыл бұрын
@@funnyflix2 1/2 inch grommet
Just finished this. Was as easy as he makes it seem. Only different choice I made was I mounted the sensor in the silicone elbow not the pipe. Kept me from having to source a grommet. 1/2" paddle bit and it fit nicely. Can't speak to mileage yet, but no CEL so far. Thanks Cole.
@CoastalWheels
3 жыл бұрын
I’m glad I could help, the elbow mounted sensor is a great idea!
@chandlerdaughtry9550
3 жыл бұрын
Any CEL issues and how is the MPG?
@tonybolte02
3 жыл бұрын
Just drill and plug in? No silicone or anything? Any check engine lights yet?
@aaronhurd3449
3 жыл бұрын
@@chandlerdaughtry9550 No CEL. Mileage didn't change. Stays between 15 and 16.
@aaronhurd3449
3 жыл бұрын
@@tonybolte02 Right. I just drilled the hole, cleaned up the edge and pressed the sensor into the rubber. No CEL, but no real mileage change either.
This mod really sounds good if you have a snorkel with K&N drop in air filter. I had to work the 90 a little bit more due to the previous owner installed a throttle spacer plate. I made up some brackets for the coolant overflow hose. I chose to paint the pipe green as that is the accent color. I have one of the million Granite Crystal Metallic JKU's out there so things like D rings, inner fender liners inserts and springs have been painted bright green to be different.
@CoastalWheels
Жыл бұрын
Hell yeah man definitely would!
Use an AFE dry flow air filter no oil on maf sensor. Also abs black sewer pipe smoothed and debured doesn heat soak like aluminum it absorbs engine heat and passes along to incoming air.
@CoastalWheels
Жыл бұрын
Good to know!
Sweet!
Won’t that aluminum pipe mess with the alternator?
Where did you get everything from?
Great diy video I need to do this to mine do you have the 3.6 or 3.8 in your jeep
@CoastalWheels
3 жыл бұрын
Thank you! I have the 3.6.
It appears to be a 1/2" grommet? Is that the size drill bit you used?
@CoastalWheels
4 жыл бұрын
I’m honestly not 100% sure anymore since it’s been a while, I just took the sensor to the store and sized it up to the right size grommet then grabbed a drill bit that looked about right lol
What size grommet is needed or part number by any chance ?
@CoastalWheels
4 жыл бұрын
Not too sure, I took the sensor to Home Depot and found one that fit
all you need now is to get a K&N drop in filter for your air box and you should pick up some more mpg. and power.
@thedoorider
Жыл бұрын
Every time I have used a K & N filter I have found dirt on the engine side of the filter. I ensure that I follow all the instructions to the letter so that it is installed right. And still have dirt on the wrong side of the K & N filter
I wish I did this instead of my cold air. Cheaper and still water proof. Oh well
Did your exceleration increase? Or better throttle response?
@CoastalWheels
Жыл бұрын
Maybe a little but it’s not really anything noticeable. More for the sound really and possibly a little gas mileage depending
Do you have the place you got the parts list?
@CoastalWheels
2 жыл бұрын
I got the pipe at a metal shop, boots off Amazon and grommet from autozone.
What kind of exhaust do you have?
@CoastalWheels
4 жыл бұрын
Just a factory exhaust with the muffler deleted
Update video please
@CoastalWheels
Жыл бұрын
Sorry I sold the Jeep
Hello Sir May I know what size diameter of the drill for the sensor?? Thank you!
@CoastalWheels
Жыл бұрын
I’m sorry I no longer own the vehicle and I don’t remember
@ericbaukimo
Жыл бұрын
@@CoastalWheels Thank you!I will measure it
@CoastalWheels
Жыл бұрын
@@ericbaukimo no problem, when you find out reply to this with the size so you can help someone else out with the same question
@ericbaukimo
Жыл бұрын
@@CoastalWheels Its 14mm!
I put a K&N intake and an open exhaust and got no MPG improvement. But if you did great. And if you’re relying on what the dash gauge says that your fuel mileage is you’re kidding yourself. Ya still have to divide the fuel into the mileage to get it straight.
@CoastalWheels
2 жыл бұрын
Thanks but hand calculated at fill ups showed the same result. I also believe that there’s always something to learn regardless of age or experience. (Last part is a reply to your original comment before it was edited).
Did it make a sound difference
@CoastalWheels
3 жыл бұрын
There was a slight improvement in sound but nothing crazy
Where did you buy these materials?
@CoastalWheels
4 жыл бұрын
I bought the couplers off amazon the grommet from autozone and the tubing off some random performance website
@Jake-ci1ld
4 жыл бұрын
Do you know what size piping/ curved tubing
So after some more driving, was there a legitimate MPG increase?
@CoastalWheels
4 жыл бұрын
Yeah it wasn’t a huge difference maybe averaging 1 extra MPG but I have a heavy foot.
Any updates since installing this? Any issues?
@CoastalWheels
2 жыл бұрын
I sold the Jeep a couple months after doing this but no issues while I had it.
Hey is yours a six speed?
@CoastalWheels
3 жыл бұрын
Yes it is.
Okay three years gone, how is it holding up?
@CoastalWheels
Жыл бұрын
I sold it a while ago but it was holding up good
@ceementality
Жыл бұрын
@@CoastalWheels would it work with a superchip f4 3872 tuner or no
@ceementality
Жыл бұрын
@@CoastalWheels would it work with superchips f4 3872
@CoastalWheels
Жыл бұрын
@@ceementality I don’t see why not
@ceementality
Жыл бұрын
@@CoastalWheels I didn't know if you had any insight if there way a way to turn up the fuel to account for the cai