Glad to see that you cut it the correct way without separating your body. I wish the previous owner of my jeep knew this!

You have great presentation on camera. Nice video, and nice XJ.

@AdmiralOffRoad

2 жыл бұрын

Thank you!

for people wanting to attempt their own cut and folds... going over the rears with a heatgun before hammering will help stop the paint from chipping

@elliotttroy7127

2 жыл бұрын

i know Im asking the wrong place but does someone know of a trick to log back into an Instagram account..? I stupidly lost my account password. I appreciate any help you can give me.

@israelchristian6683

2 жыл бұрын

@Elliott Troy instablaster :)

@elliotttroy7127

2 жыл бұрын

@Israel Christian i really appreciate your reply. I found the site thru google and Im trying it out now. Seems to take a while so I will reply here later with my results.

@elliotttroy7127

2 жыл бұрын

@Israel Christian it did the trick and I finally got access to my account again. I'm so happy! Thanks so much, you saved my account!

@israelchristian6683

2 жыл бұрын

@Elliott Troy no problem :D

Very young and talented thank you for the video I’m about to do this for my sons 99 can

I've been debating doing this, on my way to go do it now, good video!

If you sand the paint away prior to bending the metal in your pie cuts on the rear fender, it won't crack.

Really good video! I still can't get over how clean your jeep is.

@AdmiralOffRoad

7 жыл бұрын

Thanks! she's purty

@juanLopez-sw5di

5 жыл бұрын

He is In Arizona LOL better be clean

Love your work ethics...plain and simple And well explained. Thanks from me in northland New Zealand🇳🇿

@AdmiralOffRoad

7 жыл бұрын

thanks!

@sam59874

5 жыл бұрын

Hey bro. I'm from northland NZ as well. Have you got a jeep a d have you done this? Thinking of doing it on mine.

Simply clean. Looks great

@AdmiralOffRoad

7 жыл бұрын

Thanks!

got an asmr response when you started tapping those things back haha

Great video!! Gonna do that and add some Rusty's off-road fender flares.

Good work man. Quick & simply made video.

Very informative, you did a great job, young man...

@AdmiralOffRoad

5 жыл бұрын

Thank you!

Great video bro love the way that keep looks

@AdmiralOffRoad

6 жыл бұрын

thanks!

I put 33x12.50 on my XJ with the same fender trimming and 1.75" spacer and aal. I swapped some suspension and went to 3" lift and I can easily run 35s. May have some extra clearance since I'm using aftermarket control arms and the front axle is pushed forward almost an inch. Nice video!!!!

@AdmiralOffRoad

6 жыл бұрын

Thanks!

One little tip is to turn the blade upside down in the sawzall to make it easier

Complimenti !!! spiegazione molto chiara, lavoro che sicuramente farò prossimamente. Grazie.

@AdmiralOffRoad

7 жыл бұрын

Grazie! e buona fortuna

On my baby I put weather striping on to cover the sharp metal and I actually like how it looked. Nice jeep btw

@AdmiralOffRoad

6 жыл бұрын

i haven't put anything on the fender yet but I'm considering it.

Awesome job yung man. ..I'm very happy to see a yung man at work doing a great job!

Nice very clean, going to be running 33s on a 3inch lift pretty soon

@allen2589

5 жыл бұрын

MUCKFOOT lifts are only to allow for bigger tires

@EthanDavis.w

5 жыл бұрын

@@MUCKFOOT⁶⁶⁶ Lifts are functional. The majority of people lift there vehicles to have more clearance and off roading capability. Not cosmetics

very nice as usual gives it that beast look too

@AdmiralOffRoad

7 жыл бұрын

Thank you!

Very good job. Looks great.

@AdmiralOffRoad

6 жыл бұрын

thanks!

Clean jeep, clean video👍🏻

@AdmiralOffRoad

6 жыл бұрын

Thanks!

Nice rig man, keep it up!

@AdmiralOffRoad

6 жыл бұрын

Thanks!

Looks amazing man I plan on doing the same pretty soon. Just wondering, any rubbing with the new tires on the fender or bumper

Great video!!! Think I'll do this.

Nice video, i love your car!

Oh shit. Fellow az4x4club member. Sweet jeep dude.

Always enjoy your helpful and well put together videos. This one was great. I am about to put the very same Coopers on my 99 XJ. Maybe I missed it but have you or are you going to change gearing or axles? Would love a follow up on how your gearing works with the 35's. Thanks again!

@AdmiralOffRoad

7 жыл бұрын

Thanks, yes I have 4.88 gears. I'm keeping the Chrysler 8.25 and going to a D30 HP front. I'm super happy with the gearing. Its a little deeper than stock which helps get those heavy tires turning, but only runs a few hundred RPMs higher on the highway

Good job. Nice video. Cool jeep.

@AdmiralOffRoad

7 жыл бұрын

thanks!

That looks sick with 35s

@AdmiralOffRoad

7 жыл бұрын

thanks!

Would you still have your original fender flares I would be interested in purchasing

Nice Jeep! Be sure to save your factory flares and all hardware, not because you'll use them, but they are hard to find and are worth $$$$$$.

Just curious as to if there is any rubbing when your wheeling?

Ive been wondering how it would hold up if you just left the spot welds and cut the others out completely?

The vids have been a life saver man, you do great work! Question: I'm about to run 33s on a 2001 xj daily driver...(they were a gift and I don't really off road due to scheduling.) What should I re-gear to? 4.56? I don't drive the jeep more than 10-15 miles on the weekdays.

@AdmiralOffRoad

7 жыл бұрын

yep, 4.56 should work well

Are going to regear ur jeep because of the large tires? How is the gas milage?

Sorry for the confusion My TJ is all set 3.5 Metalcloak short arm long travel lift 4:56 gears and lockers front and back bumpers winches hilift and more Just looking for a budget plan for an XJ Yours seems like a good start So any details on the XJ parts you listed above would be great

@AdmiralOffRoad

7 жыл бұрын

Coils: RE1310 Track Bar: RE1660 Shackle relocation bracket: Rough Country SKU# 1117 Shackles: Rough Country SKU# 1077 The control arm drop brackets were used, and I can't find a part number for the YJ front brake lines or Dodge Dakota rear line.

Did you keep stock axles when you put these 35's on? And if so, how are the axles holding up?

I wanna do the same for my wj. But no one post videos on how to trim for 33's lol.

what kind of lights do you have on the top of the jeep?

SWEET RIDE !!!!!!!!!!!!!!!!!!!!!

@AdmiralOffRoad

7 жыл бұрын

thanks!

hello how did you do with the differential relationship by putting 35 inches on the tires?

Great job !!!

what size tires are those? i know 35's but whats the other numbers?

is 20 igood for a 3 inch lift. or 2 inch lift. ?

Could I put back the protective plastic?

Nice cheap man! Just wondering what lift kit do you have on there.

nice car brother I like it good job brother

@AdmiralOffRoad

7 жыл бұрын

Thanks!

That was a great video. Thank you for the effort. Greetings from Arizona. Also, did you change the rear differential ratio after changing tire size?

@AdmiralOffRoad

3 жыл бұрын

Hi Mike, thanks and greetings from mesa! I did regear to 4.88

Can I do this to my ZJ?

Finally! A new video!

@AdmiralOffRoad

7 жыл бұрын

more will be coming in the following weeks

@anthonydivita523

7 жыл бұрын

Admiral Off-Road Awesome!

Y explicas todo muy bien !! 👍💪

@AdmiralOffRoad

7 жыл бұрын

thanks!

Are you running any wheel spacers? What rims are you running?

Your Jeep looks good! Do youhave any rub with a 4.5 lift? Also do you run stock axles with 35s? If so do you have amy issues?

@isaiahfrias9037

3 жыл бұрын

Yeah I have short arms and I rub like a mother. My stock axels do alright but I feel 1 tons would handle better

Looks great

@AdmiralOffRoad

7 жыл бұрын

Thanks!

very good video here. well done!

@AdmiralOffRoad

5 жыл бұрын

Thanks!

Good video. The wheels are what you measure for which car? Vehicle brand

does not affect this modification in the future?

Why do you have to keep the spot welds on the rear fenders? I have seen a lot of other people just cut the rear fenders like they do the front fenders.

Clean cut ….thanks!

hello how many inches did you lift the jeep? and the covers are 35 or what are they?

This is great 👍🏽 great job man do you have a 3 inch lift with the big boys 35s

@AdmiralOffRoad

7 жыл бұрын

Thanks. its on 4.5in lift with 35s

@younqmclovin3647

6 жыл бұрын

dre7 gopro he said 4.5 inch

@causeuncause4059

6 жыл бұрын

dre7 gopro yo he said 4.5 inch

@tonnykomatsu2408

6 жыл бұрын

"*

Why did you have to cut around the spot welds?

Do the fender liners fit back in after? Waters gonna get caught between the body

Se ve bien bonita asi de sencilla, me gusta !!

You really take good care of your Jeep. Looks nice. Are you gonna add some different flares ? Enjoy your content.

@AdmiralOffRoad

7 жыл бұрын

Thanks! I think, for now, I'm going to stay flareless. I kind of like the look of the tires sticking out a bit and its legal here in AZ to do that.

@shaydmarchant8556

7 жыл бұрын

Admiral Off-Road nice I'm in AZ too man, Im building my '89 XJ sport two-door right now but unfortunately the previous owner did a terrible job cutting the fenders lol

Are you able to put center caps on your tires

What kind of front winch bumper is that please?

You need a bigger hammer lol. Great video, I'm running the same cooper tires in 35's as well. I absolutely love them. What size lift do you have? 4.5"?

@AdmiralOffRoad

7 жыл бұрын

yep, 4.5 in and i agree about the hammer!

Nice video. I'm surprised you didn't end up doing the rear quarter cut and fold. That's what I ended up doing because I didn't like the look of having a big hole back there. Looks like we both need a rear bumper as well haha I don't like the stock bumper without the rear quarter trim.

@AdmiralOffRoad

7 жыл бұрын

I'm still considering it. Just depends on what rear bumper I end up with. I agree about not liking the gap with the stock bumper and no corner

Are those stock axles and what wheels are those?

Are you running stock axles? Any issues?

So you didn’t have to use a lift kit?

You can take some black door trim that you get in a roll to clean up the cuts and make them not as sharp or I have seen people take some small hose and cut it then glue it on.

@AdmiralOffRoad

7 жыл бұрын

i may do that in the future. For now, I have them bedlined to take care of the flaking paint, especially in the rear

@petyweestraw

7 жыл бұрын

Mr1998jeepcherokee Also I've seen guys use that black foam tubing you put on pipes to protect from freezing in the winter. At first I thought it as a type of flare till I asked what brand they were. Floored me when he told me what they were. Looked like they belonged there

What type of lift do you have?

I'm running 33's right now on 4.5 lift with the fenders trimmed. How do you like the 35's on trails? Are you rubbing? Broken any axles?

@AdmiralOffRoad

7 жыл бұрын

have not broken anything, and it does rub a little bit at full lock with some flex, so ill have to trim a little bit more in the rear of the front tire opening

I just got my first jeep 1990 cherokee all white

@AdmiralOffRoad

4 жыл бұрын

Sweet!

Surely it’s easier if you remove the wheels? I wish it was legal to do this mod here in Australia :/

Man I'm jealous your rear quarters ain't rotten out...

@AdmiralOffRoad

5 жыл бұрын

The lack of rust on cars here in Arizona makes them much more fun to work on

I know this video is old, but I just noticed your front wheel is counter balanced. Wheel weights need to be in only one location. I highly recommend taking it somewhere (that actually knows what they're doing, and doesn't counter balance) and have them rebalance it.

LIFE HACK: on the front flares, use door edging on the cut to make it dull and to clean up the look of it. Also get the added benefit of not having to paint it

@mayk3lll

5 жыл бұрын

Special Snowflake you should still paint it to prevent rust. Water can creep into anywhere

Are those 35x12.5?

Thats bad ass! 👍🏽

@AdmiralOffRoad

6 жыл бұрын

thanks!

did you upgrade the axels to fit the 35s or are you running dana stock?

@AdmiralOffRoad

5 жыл бұрын

The rear is a Chrysler 8.25 and the front is a High Pinion Dana 30. It came with a low pinion front. The high pinion dana 30 wasnt a huge upgrade but I was able to regear the high pinion dana 30 while I was still driving on the low pinion one and then just swap it in. It was my daily driver at the time so I couldn't afford to not be able to drive it while regearing. So to answer your question, the rear is the stock axle, just regeared to 4.88 and the front axle is out of a 99 XJ, again, regeared to 4.88

At about 11:00 on the clock, I noticed wires hanging in the cut-out wheel well...what are they to and from, and, how did you secure them so as to not get ripped out either by the turning tire, or the trail ? Inquiring mind(s) want to know. ty. ~ 12 Block Tokie ~ Kingsport, Tennessee 37660

@AdmiralOffRoad

7 жыл бұрын

They were from the light bar. I just ran them up over the quarter panel support and secured it in another place to keep them from catching on things

I have a question those 35s are 12.50 inches wide do you have any problems with the tires rubbing on any turns.

@AdmiralOffRoad

7 жыл бұрын

No, With the 3.75 backspacing, i don't have any rubbing in turns

What's the reason for leaving the spot welds on the back ?

@AdmiralOffRoad

7 жыл бұрын

If you cut them off, you will have to re-weld the rear quarter panel and wheel well together

Why do you bend the fender in the back?

Did you keep a little lip on the rear by not cutting all the way up ??

@AdmiralOffRoad

5 жыл бұрын

yes the rear is cut and then folded because of the spot welds

Very nice Thank you so mutsh

Looks great! Where did you get your roof rack?

@AdmiralOffRoad

7 жыл бұрын

Thanks! the roof rack was a gift and I can't remember where they got it. Its a universal basket that attaches to the stock rack

Nice video! What front bumper is that?

@AdmiralOffRoad

6 жыл бұрын

Thanks! its the JCR Offroad DIY winch bumper

Thank u, finally a video that actually gets right to the point. Not some shit head going over a 40 min intro but his project, his wifes jeep and all his future plans. No one cares. Thanks for a good video

@valentinheredia5558

5 жыл бұрын

Who ruined your jeep searches? God that sounds horrible guy.

how much backspacing do you have on your wheels

@AdmiralOffRoad

5 жыл бұрын

3.75in

Great video!! Definitely gives the ole XJ a meaner look. Have you noticed any rubbing? Either from flexin or turning?

@AdmiralOffRoad

7 жыл бұрын

there is just a little bit when i flex it with the tire turned that i will have to take care of.

@shaydmarchant8556

7 жыл бұрын

Admiral Off-Road aw man that sucks, my dad put 35's on his 3 jeep Comanches and crushed in the backside of all the front fenders lol, needless to say he put the 33's back on

@AdmiralOffRoad

7 жыл бұрын

its not too bad. just a tiny bit more trimming on the back side should take care of it

That looks a lot like mine, mine is a 88 though

Why did u roll the back fender but cut the front ones off??

@AdmiralOffRoad

7 жыл бұрын

the rear needs to be rolled because of the inner and outer fender spot welds. The front fenders don't have this issue so they can just be cut which is much faster and easier.

love it

What size are your rims? Like the width and stuff?

@AdmiralOffRoad

6 жыл бұрын

15x8 with 3.75in backspacing