JDM Suzuki Carry 4x4 Kei mini truck part 3
Тәжірибелік нұсқаулар және стиль
In this video I do more modifications to my JDM Suzuki Carry Kei truck.
Carb work, exhaust work, replaced all the cooling lines with silicon, bumper work.
I also TIG welded and modified an aluminum radiator from a side by side to fit my Kei truck.
At the end of the video we do some 4x4 off-roading with the Honda Acty attack and my Suzuki Carry 4WD.
Here’s a link to Olympic Overland KZread channel 👍 / olympicoverland
Here’s a few links to other videos about these trucks.
Buying a Suzuki carry Kei truck part 1 • Buying a JDM Suzuki Ca...
Buying a Suzuki Carry part 2 • Suzuki Carry JDM 4x4 K...
Buying a Honda Acty Attack Kei truck • Buying a JDM kei truck...
Building a ladder rack for a Kei truck • Suzuki Carry JDM 4x4 k...
Kei Truck Off-Road Tires, What Size To Buy? • Kei Truck Off-Road Tir...
This is the Crossfire CNC plasma table from Langmuir systems.
Here’s an affiliate link to the Crossfire website if you are interested in checking out the table
store.langmuirsystems.com/?aff=16
Don’t forget to use the promo code MIKEFESTIVA this will save you $100 at checkout on the table!
Hynade CNC Blow back pilot arc 60 amp Plasma plug and play for CNC amzn.to/3ixzw7I
Save 5% at checkout with MIKEFESTIVA promo code
Here’s a paid affiliate link to Yeswelder website
YESWELDER LINK: yeswelder.com/?ref=s6nzvjxbwejy
SAVE 10% Use Promo code MIKEFESTIVA and it helps me out a little bit too 👍
Paid Amazon Affiliate Links Below:
**13" Mud Tires I have on my truck.**
Set of 4 Forceum Mud Tires-165/80R13 amzn.to/45hKs03
YESWELDER 135Amp MIG Welder,110V Flux Core Welder Flux MIG/Lift TIG/Stick 3-in-1 amzn.to/3wBUDhh
Hynade Plasma Cutter, 35Amps 110V Input Volt great Bargen amzn.to/3ID7fXW
Hynade Plasma Cutting Torch Consumables amzn.to/3D7ineE
Hynade MIG140D flux welder Dual Voltage 110/220V amzn.to/3tBuQ6Z use (MIKEFESTIVA) promo code at checkout and save 5%
Hynade Flux wire really good wire amzn.to/3D7hmDm
Hynade AC/DC TIG 200 welder amzn.to/3uv0qT8
Use (MIKEFESTIVA) Promo code at Checkout and SAVE 5% on this Welder
Bestarc Pilot Arc Plasma Cutter, BTC500DP amzn.to/3LilRxP
Bestarc Plasma Cutting Torch Consumable Kit amzn.to/3Ld7oD7
TIG Stubby Gas Lens Kit- #10 Pyrex Glass Cup Kit- amzn.to/2IsncHc
Argon CO2 Regulator- amzn.to/376uDOq
Miller ML00895 Lpr-100 Respirator- amzn.to/3g12vyY
Tungsten Electrodes for Tig Welding 2% Grey- amzn.to/3g6D0N0
** Disclaimer **
Welding can be dangerous.
You should seek out additional information and understand all the safety and dangers involved in welding. Understand the PPE equipment needed to start welding safely.
Mike Festiva does not take any responsibility for injury’s created by doing so.
Weld at your own risk.
Пікірлер: 310
One of the hardest working men on KZread. Thanks for making content without swearing, look forward to watching your adventures with my little guy soon!
@Mikefestiva
2 жыл бұрын
Thanks ask much for saying that! I appreciate it so much 👍
Bend every 3rd tooth out on a 2 1/8” hole saw to make it a 2 1/4! Another great video Mike. Thx
Y'all are having WAY too much fun with those lil trucks!
@Mikefestiva
2 жыл бұрын
I know they a pretty awesome little trucks
Drummer with a welding helmet. That was so awesome 👍👍👍
@Mikefestiva
2 жыл бұрын
Haha 😂 he loves playing drums and hanging out in the shop! 🙂👍
素晴らしいカスタム動画をありがとうございます。 kei truck の多くは農家の必需品として愛用されてきました。 やはり舗装されて無い大自然の中を駆け抜けて行く姿がとても良く似合うと感じました。
@Mikefestiva
2 жыл бұрын
Thanks for checking out my new video 🙂👍 I really like these Kei trucks, it’s nice to know they are still going strong after 30 years of use. Well built trucks 👍 Japanese vehicles are great!
Can’t beat that Mike Festiva 👍 means he’s having blast!
Fantastic content, as usual! Love these adventure and maintenance combo videos. Looking forward the next one! Thank you, Mike!
@Mikefestiva
2 жыл бұрын
Thanks for watching!!!
Great video! All KZreadrs need to study your techniques. Text at bottom👍🏾 good music👍🏾 fab tips 👍🏾
@Mikefestiva
2 жыл бұрын
Thank you Omar!!!
@Mikefestiva
2 жыл бұрын
Thanks Omar! I really appreciate it man 🙂👍
Great video Mike! Glad to see that the mods added to the overall performance of the vehicle. Thanks for sharing.
Dear Mike festiva. 👍👌👏 Another great video! I love the micro pickup truck video series. By the way: Congrats for not smoking, swearing, drinking in public respectively in your videos. 2) For dealing with the new carb and radiator, one definitely needs some knowledge and skills. Congrats for having both. I will check out your brothers channel now. Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards luck and health to all of you.
Manual choke is so much better.. Nice move
Good video Mike! You have really got that running good now! You and your brother sure find some good places to run those trucks! Going to check out his channel!
My work just bought a Mitsubishi dump from Duncan imports. It’s replacing a John Deere gator. It’s the best thing to run around a college campus in to do grounds work.
Nice! Tubing bender! Carbs also imported again always in the Philippines great! I like your modification, i envy you 😊🙏🤙🇵🇭
Hi Mike, I first found your channel when I was looking for mig welder reviews. Since then I have binge-watched your channel countless times. Thank you for your effort an great content! Love your channel and helpful insight!
@Mikefestiva
2 жыл бұрын
Thanks Michael! I really appreciate it 👍🙂 I have a lot of different topics I cover on my channel, I like keeping things interesting, I have found that my subscribers aren’t watching my videos as much anymore, I have found that YT doesn’t notify a large group of my subscribers when I post new videos now, I think this is because my channel has different topics and content. I definitely appreciate having loyal subscribers like you that enjoy a wide range of my videos! Thank you 😊
endless smiles ...... fab'n, fix'n and cruising. 👍👍😎👍👍
@Mikefestiva
2 жыл бұрын
Thanks for checking out my new video Joel! 🙂👍
I kind of like his headware for edware for playing drums a welding helmet can he even see the drums with that thing on He's taken after like father from like son have an excellent day
Love your mentality when it comes to this build. Simple and functional.
Love these videos, your aluminium radiator is a work of art ! Manual choke for the win. Really good idea replacing the hoses and plastic T's 👍 You'll get another 5hp with an electric fan ! Your Tacho looks awesome 😆 These little trucks were super popular on Japan's northernmost island of Hokkaido. The snowfall there is some of the highest in the world. PS: The "just punch it !" technique can work really well for tiny trucks, they're harder to break because of the very light weight and lower stress on driveline components 😆
@Mikefestiva
2 жыл бұрын
Thanks for checking out my new Kei truck video! I really like my little Suzuki 👍🙂 Great dependable truck, on the weekends when I’m not commuting I tend to only drive it, especially with the gas prices. Take care Edward 🙂
It's nice to see a REAL passion. 👍
Stick a 'led load resistor' on the blinkers or indicators lol (one per side) and it will stop that 'short fast' blinks (that flash rate wouldn't be legal here in Australia)... Looking good, I use to drive the little carry utes here when I was an apprentice, they were popular in the railway maintenance departments...
The smaller tires may function a little better for daily driving, but the bigger ones definitely looked cooler.
Like the ladder rack you made, makes the truck much more useful to have around.
Thanks for the inspiration! I nee to do all the same for mine! I pulled it in the garage yesterday to dig in to the head gasket.
My travels in Vietnam introduced me to the hard working Suzuki kei trucks and vans. Still plenty of them on the roads and trails today. Keep the direct drive fan. Less to go wrong on the trail.
Another awesome video. It was awesome seeing your kiddo on the drums.
That little truck is awesome. Nice mods. If you had a locking rear diff. oh man!
Little beastie seems to do quite well with the new carb.
Nearly all the trucks going to the US didn’t pass the Japanese inspection for many years (tenken).I think it’s something to be well aware of. The cracked hoses, and dodgy lines are a sign that this truck wasn’t road legal in Japan for many years, maybe more than 10+ and likely was used as a beater/farm truck only. It’s nice seing the truck get loved
Great video Mike can’t wait to see the next video already!
Great video, love the information to fun switch, so jealous of the “forgotten” bunkers…
Those things look like alot of fun
Love these japanese mini trucks.
My friend also has the pre production yeswelder and we love it!!!
Love your upgrading the Susuki kie truck. The upgrade adds what you want while keeping the cost within reason. Would love to see mini van Susuki kie style made into a safari style.
Yes!! Happy to hear your son's drum break!!
@Mikefestiva
2 жыл бұрын
Haha he loves playing the drums! 🙂👍
great to see you again
@Mikefestiva
2 жыл бұрын
Thanks Tim 👍🙂
Great little truck. Those carbs remind me of the s.u. ones fitted to Austin Metro here in Britain in 1980's, which were auto choke. Never worked right so many were retro fitted with manual cable operated units.
Luv the look of the new tires
@Mikefestiva
Жыл бұрын
Thanks for checking out my videos Jason 👍 yes these tires work much better and looks pretty good 😊
Damn that Honda is clean!
I really like what you've done to yours so far.
As always nice work. Fun!!! I want one. But can’t be messing with as you do. Awesome job
Love your work 👍
@Mikefestiva
2 жыл бұрын
Thanks! I appreciate it 👍🙂
Sweet mini truck.
Hey Mike. Thanks for the update, always glad when you post another video. You have done a lot of stuff to this mini truck. It's really a handy little beast in my mind.
@Mikefestiva
2 жыл бұрын
Thanks for checking out my new video Ants 🙂👍 It’s a great little truck and it’s becoming really reliable now!
Nice work! FYI, you can put a resistor inline to slow the signals down.
very nice and fun watching u modify the truck
Hey Mike Good Job on this Project Thanks .Great Video .
@Mikefestiva
2 жыл бұрын
Thanks 👍 I really like this little truck 🙂
Welcome to the club man, works an upgrades never stops on suzukis. Congrats
Awesome upgrades - love making it more simple and more reliable. I have been messing with my carburetor for about a year and I still can’t get consistent performance! It is also a manual choke version that was added before I got the truck. I have worked on the air / fuel settings, but never tried different jetting - Going to take another look at it soon! Keep the great videos coming!
@Mikefestiva
2 жыл бұрын
Thank you!!
Awesome little truck. Killer videos on this process.
@Mikefestiva
2 жыл бұрын
Thanks Jeff 👍🙂
Awesome informative video !!! In some future you could work on one trailer hitch , I have 1996 Suzuki Carry ! Thanks
that truck needs an efi conversion. and a turbo!
Thanks Mike been watching your videos for some years now. Finally subscribed. Thanks for all the info as I find myself looking for a mini truck to do the same thing as you guys are doing. Will check out olympic overland now
Another great video Mike...really enjoy the insight you provide...useful modifications..thanks for sharing
@Mikefestiva
2 жыл бұрын
Thank you!!!
I like your videos, used this one to change out my carb
@Mikefestiva
2 жыл бұрын
Right on 🙂👍
That Honda though!
Mike the mods especially the rad & electric fan will show performance advances quickly. The locking differential is a must.
Thanks for the video! 👍 good entertainment as always! You could build some trackmats or sandladders i think they are called in english? Nice to have on the bed when you are driving solo! 👌
@Mikefestiva
2 жыл бұрын
Thanks for checking out my new video Marcus 🙂👍 Definitely a good suggestion. I have a small set of traction boards but forgot them that day.
I've been looking at one of these mini trucks for a long time! I may be retiring to a rule area once again such as Central Oregon! So they've been something I've been highly interested in, if I may make a comment the one thing I would do, not only a locking rear diff! I would also think about the possibility of a 4-link or a triangulated 4 Link! The easy way to do it depending upon the loads you want to carry, is to remove one of the strongest lower leaves of the rear spring packs! The one with the most starch in it. Cuz I did notice the set of overloads we're not connected! Since it has the long rear shackles the little bit of lift as you mentioned in your previous videos oh, I think a softer rear pack would work very well! As far as a multi-link situation as I mentioned earlier there is such a variety of side-by-side shocks and small coilovers that could be easily adapted with your skills which are impressive mind you thank you for the series of these videos I am enjoying them immensely
My dream car ... I always dreaming have pickup carry like that 😄
@Mikefestiva
2 жыл бұрын
They are really cool little trucks 👍 I use mine all the time 🙂 Thanks for checking out my channel!
Awesome, I love your videos. Thanks for sharing your knowledge on these cool mini trucks.
@Mikefestiva
Жыл бұрын
Thanks for checking out my videos Alec 😊👍
that was great - thanks
You really have some of the best content on youtube, I'd love to see you put a predator 420cc on a streetbike frame and make it practical for street use... maybe mod up something for your little guy to ride with you... I put my kid on a 4 wheeler at 4 years old and he did great on it!
thank you your video is very inspiring and very useful for me👍🤩
Hey there Mr Festiva! You say that you want a locker in the rear end and that it had one from the factory which makes me want to ask what kind of locker was it? Are you going to put one up front as well? Thanks for the mini pinz man that’s how I discovered your channel I mean c’mon, who makes a mini pinz? Mike will, he’ll build anything! 🤣
Excellent video as always Mike keep up the awesome work
Great video man, so much fun! Looking forward to more mini truck trips. That new carb was a huge improvement 👍
«Hope you enjoyed the video.» Yes, sir! I did..! Pleased to see next gen is coming along..welding helmet at the drums 👍 Great! The kids are growing to fast..mine are adults allready.
Nice work as always Mike. 🤘🏻🤘🏻🎉🎉🎉🎉👍👍
Great Video
Nice work.
Mike Festiva you are an absolute inspiration!!!! Great Video!!! And That hobo wax mug got me hyped too!!! These videos give me confidence to dive in and DIY every time :) have a great day my friend!!!!
@Mikefestiva
2 жыл бұрын
Right on Dave 👍 Thanks for checking out my new video! I try to get the Hobo wax mug into some of my videos 🙂 I’m really looking forward to showing you how to weld soon 👍
Good job man.
Great video Mike, really digging the mini trucks.
@Mikefestiva
2 жыл бұрын
Thanks Tom! I sure like these trucks 👍 On the weekends when I’m not driving long distances for work I mostly only drive my little Suzuki Truck 🙂
This is such a cool build man! Really is. You have transformed this thing big time.
@Mikefestiva
2 жыл бұрын
Thanks Keith! I really appreciate it 👍 I drive this little truck all the time. Well built trucks. Have a good weekend Keith!
man i love this thing, i wanna get one so bad.
rock on bro.....your a bit of a giver boy when real designing comes into effect, hi five ya, Mike.
Honda power 💪🔥 . I would love to see this lil sweet suzuki runs with a 1500cc injection engine 😍
Mike, my dad built a tractor with a Toyota 1200cc engine. He had trouble with the carb, so he opted for a VW beetle carb, and it ran well for him. He said that he wanted it simple to operate, so he was satisfied with it.
@Mikefestiva
2 жыл бұрын
Thanks awesome!!!
Good stuff Mike. Those seem like a lot of fun. Nice little project.
@Mikefestiva
2 жыл бұрын
Thanks for checking out my new video Michael 🙂👍
Excelente vidio, parabéns!!!!
Nice video. Like the family vibes and the mellow music!
@Mikefestiva
2 жыл бұрын
appreciate it Chris 👍
@Mikefestiva
2 жыл бұрын
Right on! Thanks Chris! 🙂👍
Looking forward to your review of the Yeswelder.
GREAT video!
@Mikefestiva
Жыл бұрын
Thanks 😊
The more you work on the carb, the more I want one with EFI, lol. I'm kinda done with carbs and non-electronic ignition. 😎✌️
@Mikefestiva
Жыл бұрын
I hear you man 👍 EFI is definitely nice, lucky this truck has electronic ignition. Thanks for checking out my videos 😊
@sarge12212
Жыл бұрын
@@Mikefestiva I like how yours looks and how your brothers works, lol.
Add a resistor to the indicators. You can probably get away with just two in the blinker wiring. It will eliminate the fast blinking.
+1 Function > Looks Good job on your videos! They are well put together. Nice to see you getting into these Suzuki. Here in Cali, they seem to pretty much gravitate to Catalina Island. Not sure how they are up north. Wish they were more available. Kinda nice getting 40 MPG and still having some offroading ability.
Yet another fantastic video keep up the good work on KZread and Instagram Mike 👍🏻 Thanks from Michael From wales in the Uk
@Mikefestiva
2 жыл бұрын
Thank you so much Michael
Excellent video mike!
@Mikefestiva
2 жыл бұрын
Thanks Kevin!!!
Pretty cool truck...thinking of getting one myself.
@Mikefestiva
2 жыл бұрын
I use mine all the time, it’s a good little truck, really useful 👍🙂
@masterplumber9471
2 жыл бұрын
I BET IT IS....
MM77 Approved 👍🏼👍🏼
Thank you
@Mikefestiva
2 жыл бұрын
Thanks for checking out my videos 🙂👍
I'm just glad your the one that has to wash the damn thing ; )
@Mikefestiva
2 жыл бұрын
Haha 😂
Nice!... looks like a locking diff is comming to town....
@Mikefestiva
2 жыл бұрын
Hopefully soon! I have been trying to track one down 👍🙂
Great content
@Mikefestiva
2 жыл бұрын
Thanks Lloyd
@Mikefestiva
2 жыл бұрын
Thanks 😊
great video. I love all the content.
@Mikefestiva
2 жыл бұрын
Thank you
A little turbo diesel engine in this truck would be so sweet
@Andre_Thomasson
Жыл бұрын
Or a deutz 3 cylinder
Looking forward to the Yeswelder review. Was checking it out last night. Need to get a welder for various home hobby projects and can’t justify a Miller or Lincoln for that sort of use even though that’s pretty much all I use at work.
@Mikefestiva
2 жыл бұрын
It’s been working out great so far 👍
I just want to let you know that I plan on getting one of these trucks in the next year or so. I will definitely be referring to these videos if I have any issues. Love the build. Great work
@Mikefestiva
2 жыл бұрын
Right on 👍
@Roberge-ln1zy
2 жыл бұрын
@@Mikefestiva do you think for a stock mini truck that a Honda Acty Attack is better than your Suzuki Carry?